USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350

Tamaño: px
Comenzar la demostración a partir de la página:

Download "USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350"

Transcripción

1 USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350 THERMAL PRINTER / IMPRIMANTE THERMIQUE IMPRESORA TÉRMICA / IMPRESSORA TÉRMICA JE A Rev

2 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. WARNING Violating following instructions can cause serious injury or death. Do not plug several products in one You must use only the supplied adapter. multi-outlet. It is dangerous to use other adapters. This can provoke over-heating and a fire. If the plug is wet or dirty, dry or wipe it before usage. If the plug does not fit perfectly with the ONLY SUPPLIED ADAPTER outlet, do not plug in. Be sure to use only standardized multi-outlets. PROHIBITED Do not pull the cable to unplug. This can damage the cable, which is the origin of a fire or a breakdown of the printer. PROHIBITED Keep the plastic bag out of children s reach. If not, a child may put the bag on his head. PROHIBITED This marking shown on the product or its literature, indicates that is should not be disposed with other household wastes at the end of its working life, To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not plug in or unplug with your hands wet. You can be electrocuted. PROHIBITED Do not bend the cable by force or leave it under any heavy object. A damaged cable can cause a fire. If you observe a strange smoke, odor or noise from the printer, unplug it before taking following measures. Switch off the printer and unplug the set from the mains. After the disappearance of the smoke, call your dealer to repair it. PROHIBITED TO UNPLUG PRINTER 1

3 Violating following instructions can cause slight wound or damage the appliance. Keep the desiccant out of children s Install the printer on the stable surface. reach. If the printer falls down, it can be broken If not, they may eat it. and you can hurt yourself. PROHIBITED WARNING Use only approved accessories and do not try to disassemble, repair or remodel it for yourself. Call your dealer when you need these services. PROHIBITED Do not touch the HEAD of printer with your hand. This can burn your hand or deteriorate printing quality. HEAD PRINTER Warning - U.S.A This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Notice - Canada This Apparatus complies with class A limits for radio interference as specified in the Canadian department of communications radio interference regulations. Get appareil est conforme aux normes class A d interference radio tel que specifier par ministre canadien des communications dans les reglements d interference radio. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer OFF, before you connect or remove the cables on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer OFF. INTRODUCTION The SRP-350, SRP-350S, SRP-350P and SRP-350U Roll Printer are designed for use with electronic instruments such as system ECR, POS, banking equipment, computer peripheral equipment, etc. The main features of the printer are as follows: DISASSEMBLING PROHIBITED PRINER Do not let water or other foreign objects in the printer. If this happened, switch off and unplug the printer before calling your dealer. PROHIBITED Do not use the printer when it is out of order. This can cause a fire or an electrocution. Switch off and unplug the printer before calling your dealer. 1. High speed printing : 35.5(1/6 Feed) lines per second. 2. Low noise thermal printing. 3. RS-232(SRP-350), RS-485(SRP-350S), Parallel(SRP-350P), USB(SRP-350U) 4. The data buffer allows the unit to receive print data even during printing. 5. Peripheral units drive circuit enables control of external devices such as cash drawer. 6. Characters can be scaled up to 64 times compared to it s original size. 7. Bar code printing is possible by using a bar code command. 8. Different print densities can be selected by DIP switches. Please be sure to read the instruction in this manual carefully before using your new SRP-350/SRP-350P. NOTE : The socket-outlet shall be near the equipment and it shall be easy accessible. PROHIBITED PRINTER TO UNPLUG PRINTER DEALER All specifications are subjected to change without notice. 2 3

4 Table of Contents CHAPTER 1. SETTING UP THE PRINTER UNPACKING CONNECTING THE CABLES CONNECTING THE COMPUTER CONNECTING THE DRAWER CONNECTING THE POWER SUPPLY INSTALLING OR REPLACING THE PAPER ROLL ADJUSTMENTS AND SETTINGS USING THE PRINTER Chapter 1. Setting Up the Printer 1-1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. CHAPTER 2. HEXADECIMAL DUMPING CHAPTER 3. THE SELF TEST CHAPTER 4. CODE TABLE CHAPTER 5. CONTROL COMMANDS LIST APPENDIX A. STAR MODE COMMAND SUMMARY B. CONNECTORS RS-232C Cable Connector Interface Connector Drawer Connector C. NOTES D. SPECIFICATION SRP-350/350P Cover Cable Roll Paper Operator s manual AC Adapter Power Code 4 5

5 1-2. Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: 1-3. Connecting the computer You need an appropriate interface cable. 1. Plug the cable connector securely into the printer s interface connector. 2. Tighten the screws on both sides of the cable connector. 3. Attach the other end of the cable to the computer Connecting the Drawer Notes : Before connecting any of the cables, make sure that both the printer and the host are turned off. WARNING: Use a drawer that matches the printer specification. Using an improper drawer may damage the drawer as well as the printer. CAUTION: Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the telephone line may be damaged. Plug the drawer cable into the drawer kick-out connector on the back of the printer next to the power supply connector. 6 7

6 1-5. Connecting the Power Supply CAUTIONS: When connecting or disconnecting the power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. Otherwise you may damage the power supply or the printer Installing or Replacing the Paper Roll Notes : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. If the power supply s rated voltage and your outlet s voltage do not match, contact your dealer for assistance. Do not plug in the power cord. Otherwise, you may damage the power supply or the printer. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper roll cover by pressing the cover-open button. 1. Make sure that the printer s power switch is turned off, and the power supply s power cord is unplugged from the electrical outlet. 2. Check the label on the power supply to make sure that the voltage required by the power supply matches that of your electrical outlet. 3. Plug in the power supply s cable as shown below. Notice that the flat side of the plug faces down. Notes : Do not open the print cover while the printer is operating. This may damage the printer. 3. Remove the used paper roll core if there is one. 4. Insert the paper roll as shown. Notes : To remove the DC cable connector, make sure that the power supply s power cord is unplugged; then grasp the connector at the arrow and pull it straight out. 8 9

7 5. Be sure to note the correct direction that the paper comes off the roll Adjustments and Settings The SRP-350 is set up at the factory to be appropriate for almost all users. It does, however, offer some settings for users with special requirements. 6. Pull out a small amount of paper, as shown. Then close the cover. It has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as print density. The SRP-350 also has a near-end sensor for the paper. This can give you a warning when the paper is almost out. If you find that there is not enough paper remaining on the roll when the near-end sensor is triggered, you can change the near-end sensor setting. Rotate the near end sensor tab at front or rear position.(see the below figure) Notes : When closing the cover, press the center of printer cover firmly to prevent paper miss-loading 7. Tear off the paper as shown

8 1-8. Using the Printer Control Panel Serial Interface(RS-232C, RS-485) Specification DIP Switch Set 1 Functions SW FUNCTION ON OFF DEFAULT 1 Auto Line Feed Always Always OFF enabled disabled 2 Reserved - - OFF 3 Handshaking XON/OFF DTR/DSR OFF 4 Word length 7 bits 8 bits OFF 5 Parity check Yes No OFF 6 Parity selection EVEN ODD OFF 7 Baud rate selection Refer to the Following Table ON 8 OFF Baud rate selection Button The button can be disabled by the ESC c 5 command. Transmission speed SW 7 SW baud ON OFF baud OFF OFF baud ON ON baud OFF ON Press the FEED button once to advance paper one line. You can also hold down the FEED button to feed paper continuously. Panel lights POWER The POWER light is on whenever the printer is on. ERROR This indicates an error. PAPER OUT This light indicates the near end of the paper roll. Install a new paper roll and the printer Will continue printing. When the light blinks, it indicates the self-test printing standby state or macro execution Standby state when the macro execution command is used. Dip Switch Set 2 Functions SW FUNCTION ON OFF DEFAULT 1 Emulation STAR EPSON OFF 2 Reserved - - OFF 3 Reserved - - OFF 4 Busy Offline Receive Buffer Full Condition Receive Buffer Full OFF 5 Select OFF Refer to the Following Table 6 Print Density OFF 7 Near End Sensor Status Disable Enable OFF 8 Reserved - - OFF Print Density Print Density SW - 5 SW 6 1 ( Light ) ON ON 2 OFF OFF 3 ON OFF 4 ( Dark ) OFF ON 12 13

9 Parallel/USB Interface Specification Dip Switch Set 1 Functions SW FUNCTION ON OFF DEFAULT 1 Auto Line Feed Always Always OFF enabled disabled 2 Reserved - - OFF 3 Reserved - - OFF 4 Reserved - - OFF 5 Reserved - - OFF 6 Reserved - - OFF 7 Reserved - - OFF 8 Reserved - - OFF Chapter 2. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide section to help you find specific commands. To use the hexadecimal dump function, follow these steps: 1. After you make sure that the printer is off, open the cover. 2. Turn on the printer, while holding down the FEED button. 3. Close the cover, then the printer enters the hexadecimal dump mode. Dip Switch Set 2 Functions 4. Run any software program that sends data to the printer. The printer will print all the SW FUNCTION ON OFF DEFAULT 1 Emulation STAR EPSON OFF 2 Reserved - - OFF 3 Reserved - - OFF 4 Busy Offline Receive Buffer Full Condition Receive Buffer Full OFF 5 Select OFF Refer to the Following Table 6 Print Density OFF 7 Near End Sensor Status Disable Enable OFF 8 Reserved - - OFF Print Density codes it receives in a two-column format. The first column contains the hexadecimal codes and the second column gives the ASCII characters that corresponds to the codes. 1B B D 1B 44 0A 14 1E D.... ( ( ( A 41 0D 42 0A A. B. C C C A period (.) is printed for each code that has no ASCII equivalent. During the hex dump, all commands except DLE EOT and DLE ENQ are Print Density SW - 5 SW 6 1 ( Light ) ON ON 2 OFF OFF 3 ON OFF 4 ( Dark ) OFF ON disabled. 5. When the printing finishes, turn off the printer. 6. Turn on the printer and then the hexadecimal mode is off. Auto Cutter Enable / Disable selection Dip Switch Set 2 SW 2 ON Auto Cutter Disabled SW 3 ON Application Ignores Auto Cutter error for continuous printing 14 15

10 Chapter 3. The self test The self-test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. The self-test checks the following; 1. Make sure paper roll has been installed properly. 2. Turn on the power while holding down the FEED button. The self-test begins. Chapter 4. Code Table The following pages show the character code tables. To find the character corresponding to a hexadecimal number, count across the top of the table for the left digit and count down the left column of the table for the right digit. For example, 4A = J. 3. The self-test prints the current printer status, which provides the control ROM version and the DIP switch setting. 4. After printing the current printer status, self-test printing will print the following, and pause (The PAPER LED light blinks). Self-test printing. Please press the FEED button 5. Press the FEED button to continue printing. The printer prints a pattern using the built-in character set. 6. The self-test automatically ends and cuts the paper after printing the following. *** COMPLETED *** The printer is ready to receive data as soon as it completes the self-test. Page 0 ( PC437 : USA, Standard Europe) ( International Character Set : USA ) 16 17

11 Page 2 ( PC850 : Multilingual ) Page 3 ( PC860 : Portuguese ) 18 19

12 Page 4 ( PC 863 : Canadian - French ) Page 5 ( PC 865 : Nordic ) 20 21

13 Page 19 ( PC858 : Euro ) Page 255 ( Space Page ) 22 23

14 Chapter 5. Control Commands List Control codes Hexadecimal Codes Function <HT> 09 Horizontal tab <LF> 0A Print and line feed <FF> 0C Print and return to standard mode in page mode <CR> 0D Print and carriage return <CAN> 18 Cancel print data in page mode <DLE><EOT> n n Real-time status transmission <DLE><ENQ> n n Real-time request to printer <ESC><FF> 1B 0C Print data in page mode <ESC><SP> n 1B 20 n Set right-side character spacing <ESC>! n 1B 21 n Select print modes <ESC> $ nl nh 1B 24 nl nh Set absolute print position <ESC> % n 1B 25 n Select/Cancel user-defined character set <ESC> & y c1 c2.. 1B 26 y c1 c2 Define user-defined characters <ESC> * m nl nh.. 1B 2A m nl nh Select bit-image mode <ESC> - n 1B 2D n Turn underline mode on/off <ESC> 2 1B 32 Select default line spacing <ESC> 3 n 1B 33 n Set line spacing <ESC> = n 1B 3D n Set peripheral device <ESC>? n 1B 3F n Cancel user-defined characters 1B 40 Initialize printer <ESC> D n1 ~ nk 1B Set horizontal tab position <ESC> E n 1B 45 n Turn emphasized mode on/off <ESC> G n 1B 47 n Turn double-strike mode on/off <ESC> J n 1B 4A n Print and feed paper <ESC> L 1B 4C Select page mode <ESC> M n 1B 4D n Select character fonts <ESC> R n 1B 52 n Select an international character set <ESC> S 1B 53 Select standard mode <ESC> T n 1B 54 n Select print direction in page mode <ESC> V n 1B 56 n Turn 90º clockwise rotation mode on/off <ESC> W xl.. 1B 57. Set printing area in page mode <ESC> nl nh 1B 5C n Set relative print position <ESC> a n 1B 61 n Select justification International Character Set 24 25

15 Control codes Hexadecimal codes Function <ESC> c 3 n 1B n Select paper sensor to output paper end signals <ESC> c 4 n 1B n Select paper sensor to stop printing <ESC> c 5 n 1B n Enable/Disable panel button <ESC> d n 1B 64 n Print and feed n lines <ESC> p m t1 t2 1B 70 m t1 t2 Generate pulse <ESC> t n 1B 74 n Select character code table <ESC> { n 1B 7B n Turn on/off upside-down printing mode <FS> p n m 1C 70 n m Print NT bit image <FS> q n. 1C 71 n Define NV bit image <GS>! n 1D 21 n Select character size <GS> $ nl nh 1D 24 nl nh Set absolute vertical print position in page mode <GS> * x y.. 1D 2A x y.. Define downloaded bit image <GS> / m 1D 2F n Print downloaded bit image <GS> : 1D 3A Start/end macro definition <GS> B n 1D 42 n Turn white/black reverse printing mode on/off <GS> H n 1D 48 n Select printing position of HRI characters <GS> I n 1D 49 n Transmit printer ID <GS> L nl nh 1D 4C nl nh Set left margin <GS> P x y 1D 50 x y Set horizontal and vertical motion units <GS> V m 1D 56 m Select cut mode and cut paper <GS> V m n 1D 56 m n <GS> W nl hh 1D 57 nl nh Set printing area width <GS> nl nh 1D 5C nl nh Set relative vertical print position in page mode <GS> ^ r t m 1D 5E r t m Execute macro <GS> a n 1D 61 n Enable/Disable Automatic status back <GS> f n 1D 62 n Select font for HRI characters <GS> h n 1D 68 n Set bar code height <GS> k m.nul 1D 6B m NUL Print bar code <GS> k m n 1D 6B m n <GS> r n 1D 72 n Transmit status <GS> v 0 m. 1D Print raster bit image <GS> w n 1D 77 n Set bar code width Command Notation The name of the command. The code sequence. ASCII Indicates the ASCII equivalents. Hex indicates the hexadecimal equivalents. Decimal indicates the decimal equivalents. [ ] k indicates the contents of the [ ] should be repeated k times. Gives the allowable ranges for the arguments. Describes the function of the command. Explanation of Terms LSB HT LF FF CR Least Significant Bit Horizontal tab. ASCII HT Hex 09 Decimal 9 Moves the print position to the next horizontal tab position. Print and line feed. ASCII LF Hex 0A Decimal 10 Prints the data in the print buffer and feeds one line based on the current line spacing. Print and return to standard mode in page mode. ASCII FF Hex 0C Decimal 12 Prints the data in the print buffer collectively and returns to standard mode. Print and carriage return. ASCII CR Hex 0D Decimal 13 When automatic line feed is enabled, this command functions the same as LF : when automatic line feed is disabled, this command is ignored

16 CAN DLE EOT n Cancel print data in page mode. ASCII CAN Hex 18 Decimal 24 In page mode, deletes all the print data in the current printable area. Real-time status transmission. ASCII DLE EOT n Hex n Decimal 16 4 n 1 n 4 Transmits the selected printer status specified by n in real-time, according to the following parameters : n = 1 : Transmit printer status. n = 2 : Transmit off-line status. n = 3 : Transmit error status. n = 4 : Transmit paper roll sensor status. n = 1 : Printer status Bit Off/On Hex Decimal Function 0 Off 00 0 Not used. Fixed to Off. 1 On 02 2 Not used. Fixed to On. 2 Off 00 0 Drawer open/close signal is LOW (connector pin 3). On 04 4 Drawer open/close signal is HIGH (connector pin 3). 3 Off 00 0 On-Line On 08 8 Off-Line 4 On Not used. Fixed to On Undefined. 7 Off 00 0 Not used. Fixed to Off. n = 2 : Off-line status Bit Off/On Hex Decimal Function 0 Off 00 0 Not used. Fixed to Off. 1 On 02 2 Not used. Fixed to On. 2 Off 00 0 Cover is closed. On 04 4 Cover is open. 3 Off 00 0 Paper is not being fed by using the PAPER FEED button. On 08 8 Paper is being fed by the PAPER FEED button. 4 On Not used. Fixed to On. 5 Off 00 0 No paper-end stop. On Printing stops due to paper end. 6 Off No error. On Error occurs. 7 Off 00 0 Not used. Fixed to Off. Bit 5 : Becomes on when the paper end sensor detects paper end and printing stops. n = 3 : Error status Bit Off/On Hex Decimal Function 0 Off 00 0 Not used. Fixed to Off. 1 On 02 2 Not used. Fixed to On Undefined. 3 Off 00 0 No auto-cutter error. On 08 8 Auto-cutter error occurs. 4 On Not used. Fixed to On. 5 Off 00 0 No unrecoverable error. On Unrecoverable error occurs. 6 Off 00 0 No auto-recoverable error. On Auto recoverable error occurs. 7 Off 00 0 Not used. Fixed to Off. Bit 3 : If these errors occur due to paper jams or the like, it is possible to recover by correcting the cause of the error and executing DLE ENQ n (1 n 2). Bit 6 : When printing is stopped due to high print head temperature until the print head temperature drops sufficiently or when the paper roll cover is open during printing, bit 6 is on. n = 4 : Continuous paper sensor status Bit Off/On Hex Decimal Function 0 Off 00 0 Not used. Fixed to Off. 1 On 02 2 Not used. Fixed to On. 2 Off 00 0 Paper roll Near-END sensor : Paper adequate. 3 On 0C 12 Paper near-end is detected by the paper roll Near-END sensor. 4 On Not used. Fixed to On. 5 Off 00 0 Paper roll end sensor : Paper present. 6 On Paper roll end detected by the paper roll-end sensor. 7 Off 00 0 Not used. Fixed to Off. DLE ENQ n Real-time request to printer. ASCII DLE ENQ n Hex n Decimal 16 5 n 1 n 2 Recovers from an error and restart printing from the line where the error occurred

17 ESC FF ESC SP n ESC! n Print data in page mode. ASCII ESC FF Hex 1B 0C Decimal In page mode, prints all buffered data in the printing area collectively. Set right-side character spacing. ASCII ESC SP n Hex 1B 20 n Decimal n 0 n 255 Sets the character spacing for the right side of the character to [n horizontal or vertical motion units]. Select print modes. ASCII ESC! n Hex 1B 21 n Decimal n 0 n 255 Selects print mode(s) using n as follows. Bit Off/On Hex Decimal Function 0 Off 00 0 Character font(12 24) selected. On 01 1 Character font(9 17) selected. 1, Undefined. 3 Off 00 0 Emphasized mode not selected. On 08 8 Emphasized mode selected. 4 Off 00 0 Double-height mode not selected. On Double-height mode selected. 5 Off 00 0 Double-width mode not selected. On Double-width mode selected Undefined. 7 Off 00 0 Underline mode not selected. On Underline mode selected. ESC $ nl nh ESC % n Set absolute print position. ASCII ESC $ nl n Hex 1B 24 nl n Decimal nl n 0 n n 255 Set the distance from the beginning of the line to the position at which subsequent characters are to be printed. * The distance from the beginning of the line to the print position is [(nl + nh 256) (vertical or horizontal notion unit)] inches. Select / Cancel user-defined character set. ASCII ESC % n Hex 1B 25 n Decimal n 0 n 255 Selects or cancels the user-defined character set. When the LSB is 0, the user-defined character set is canceled. When the LSB is 1, the user-defined character set is selected. ESC & y c1 c2 [x1 d1 d(y X x1)] [xk d1 d(yx X xk)] Define user-defined characters. ASCII ESC & n y c1 c2[x1 d1 d(y X x1)] [xk d1 d(yx X xk)] Hex 1B 26 n y c1 c2[x1 d1 d(y X x1)] [xk d1 d(yx X xk)] Decimal n y c1 c2[x1 d1 d(y X x1)] [xk d1 d(yx X xk)] y = 3, 32 c1 c x 12 (12x24 font) 0 x 9 (9x17 font) 0 d1 d(y X xk) y specifies the number of bytes in the vertical direction. - c1 specifies the beginning character code for the definition, and c2 specifies the final code. - x specifies the number of dots in the horizontal direction

18 ESC * m nl nh d1 dk Select bit-image mode. ASCII ESC * m nl nh d1 dk Hex 1B 2A m nl nh d1 dk Decimal m nl nh d1 dk m = 0, 1, 32, 33 0 nl nh 3 0 d 255 Selects a bit-image mode using m for the number of dots specified by nl and nh, as follows : Vertical Direction Horizontal Direction m No. Vertical Dots Number Dot Dot Number of Data (k) of Dots Density Density 0 8-dots single-density 8 60 DPI 90 DPI nl + nh dot double-density 8 60 DPI 180 DPI nl + nh dot single-density DPI 90 DPI (nl + nh 256) dot double-density DPI 180 DPI (nl + nh 256) 3 ESC - n ESC 2 Turn underline mode on / off. ASCII ESC - n Hex 1B 2D n Decimal n 0 n 2, 48 H 50 Turns underline mode on or off, based on the following values of n : n Function 0, 48 Turns off underline mode. 1, 49 Turns on underline mode (1-dot thick). 2, 50 Turns on underline mode (2-dot thick). Select default line spacing. ASCII ESC 2 Hex 1B 32 Decimal Selects 1/6-inch line (approximately 4.32mm) spacing. ESC 3 n ESC = n ESC? n Set line spacing ASCII ESC 3 n Hex 1B 33 n Decimal n 0 n 255 Sets the line spacing to [n X vertical or horizontal motion unit] inches. Select peripheral device. ASCII ESC = n Hex 1B 3D n Decimal n 0 n 3 Selects device to which host computer sends data, using n as follows : Bit Off/On Hex Decimal Function 0 Off 00 0 Printer Disabled. On 01 1 Printer Disabled Undefined. Cancel user-defined characters. ASCII ESC? n Hex 1B 3F n Decimal n 32 n 126 Cancels user-defined characters. Initialize printer. ASCII Hex 1B 40 Decimal n 126 Clears the data in the print buffer and resets the printer mode to the mode that was in effect when the power was turned on

19 ESC D n1 nk NUL Set horizontal tab positions. ASCII ESC D n1 nk NUL Hex 1B 44 n1 nk 00 Decimal n1 nk 0 1 n k 32 Sets horizontal tab positions. * n specifies the column number for setting a horizontal tab position from the beginning of the line. * k indicates the total number of horizontal tab positions to be set. ESC E n Turn emphasized mode on / off. ASCII ESC E n Hex 1B 45 n Decimal n 0 n 255 Turns emphasized mode on or off. * When the LSB of n is 0, emphasized mode is turned off. * When the LSB of n is 1, emphasized mode is turned on. ESC G n Turn on / off double-strike mode. ASCII ESC G n Hex 1B 47 n Decimal n 0 n 255 Turns double-strike mode on or off. * When the LSB of n is 0, double-strike mode is turned off. * When the LSB of n is 1, double-strike mode is turned on. ESC J n Print and feed paper. ASCII ESC J n Hex 1B 4A n Decimal n 0 n 255 Prints the data in the print buffer and feeds the paper [n X vertical or horizontal motion unit] inches. ESC L ESC M n ESC R n [Default] ESC S Select page mode. ASCII ESC L Hex 1B 4C Decimal Switches from standard mode to page mode. Select character font. ASCII ESC M n Hex 1B 4D n Decimal n n = 0, 1, 48, 49 Selects character fonts. n Function 0, 48 Character font A (12 24) selected. 1, 49 Character font B (9 17) selected. Select an international character set. ASCII ESC R n Hex 1B 52 n Decimal n 0 n 10 Selects an international character set in from the following table. n = 0 n Character set n Character set 0 U.S.A 5 Sweden 1 France 6 Italy 2 Germany 7 Spain 3 U.K 9 Norway 4 Denmark 1 10 Denmark 2 Select standard mode ASCII ESC S Hex 1B 53 Decimal Switches from page mode to standard mode

20 ESC T n [Default] Select print direction in page mode. ASCII ESC T n Hex 1B 54 n Decimal n 0 n 3 48 n 51 Selects the print direction and starting position in page mode. n specifies the print direction and starting position as follows : n Print Direction Starting Position A 0, 48 Left right Upper left (A in the figure) 1, 49 Bottom to top Lower left (B in the figure) Print area 2, 50 Right to left Lower right (C in the figure) 3, 51 Top to bottom Upper right (D in the figure) C ESC V n Turn 90 clockwise rotation mode on/off. ASCII ESC V n Hex 1B 56 n Decimal n 0 n 1, 48 n 49 Turn 90 clockwise rotation mode on/off. n is used as follows : B D ESC n ESC a n Set relative print position. ASCII ESC nl nh Hex 1B 5C nl nh Decimal nl nh 0 nl nh 255 Set the print starting position based on the current position by using the horizontal or vertical motion unit. * This command sets the distance from the current position to [(nl + nh 256) horizontal or vertical motion unit] Select justification. ASCII ESC a n Hex 1B 61 n Decimal n 0 nl 2, 48 nl 50 Aligns all the data in one line to the specified position. n selects the type of justification as follows : n 0, 48 Left justification 1, 49 Centering 2, 50 Right justification Justification n Function 0, 48 Turn off 90 clockwise rotation mode. 1, 49 Turn on 90 clockwise rotation mode. ESC W xl xh yl yh dxl dxh dyl dyh Set printing area in page mode. ASCII ESC W xl xh yl yh dxl dxh dyl dyh Hex 1B 57 xl xh yl yh dxl dxh dyl dyh Decimal xl xh yl yh dxl dxh dyl dyh 0 xl xh yl yh dxl dxh dyl dyh 255 (except dxl=0 or dyl=dyh=0) The horizontal starting position, vertical starting position, printing area width, and printing area height are defined as x0, y0, dx (inch), respectively. x0 = [(xl + xh 256)] (horizontal motion unit)] y0 = [(yl + yh 256)] (vertical motion unit)] dx = [(dxl + dxh 256)] (horizontal motion unit)] dy = [(dyl + dyh 256)] (horizontal motion unit)] The printing area is set as shown in the figure below. ESC c 3 n Select paper sensor(s) to output paper end signals. ASCII ESC c 3 n Hex 1B n Decimal n 0 n 255 Selects the paper sensor(s) to output paper end signals. * Each bit of n is used as follows. Bit Off/On Hex Decimal Function 0 Off 00 0 Paper roll near-end sensor disable. On 01 1 Paper roll near-end sensor enable. 1 Off 00 0 Paper roll near-end sensor disable. On 02 2 Paper roll near-end sensor enable. 2 Off 00 0 Paper roll end sensor disable. On 04 4 Paper roll end sensor enable. 3 Off 00 0 Paper roll end sensor disable. On 08 8 Paper roll end sensor enable Undefined

USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350

USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350 USER S MANUAL / GUIDE DE l UTILISATEUR MANUAL DE USUARIO / MANUAL DE USUÁRIO SRP-350 THERMAL PRINTER / IMPRIMANTE THERMIQUE IMPRESORA TÉRMICA / IMPRESSORA TÉRMICA JE68-00135A Rev. 3.05 www.samsungminiprinters.com

Más detalles

Manual de comandos SRP-350 Impresora térmica Rev. 1.01

Manual de comandos SRP-350 Impresora térmica Rev. 1.01 Manual de comandos SRP-350 Impresora térmica Rev. 1.01 http://www.samsungminiprinters.com 1. Lista de comandos de control Códigos de control Códigos Función hexadecimales 09 Lengüeta horizontal

Más detalles

FCC Information : Warning: RF warning statement:

FCC Information : Warning: RF warning statement: FCC Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must

Más detalles

Guía del usuario. Funda con batería CP12

Guía del usuario. Funda con batería CP12 Guía del usuario Funda con batería CP12 Contenido Introducción...3 La carga más sencilla...3 Especificaciones...3 Uso de la funda con batería...4 Carga del teléfono...4 Información legal...6 2 Introducción

Más detalles

Quick Installation Guide TU2-DVIV H/W: V1.0R

Quick Installation Guide TU2-DVIV H/W: V1.0R Quick Installation Guide TU2-DVIV H/W: V1.0R Table Table of Contents of Contents Español... 1. Antes de iniciar... 2. Cómo se instala... 1 1 3 Troubleshooting... 6 Version 06.27.2008 1. Antes de iniciar

Más detalles

Quick Start Guide USB 3.0 Multi-Card Reader / Writer

Quick Start Guide USB 3.0 Multi-Card Reader / Writer Quick Start Guide USB 3.0 Multi-Card Reader / Writer Guide de démarrage rapide Lecteur de cartes multiples USB 3.0 Guía de configuración rápide USB 3.0 Varias Tarjetas lector / Escritor GFR309 PART NO.

Más detalles

Quick Installation Guide TU-S9

Quick Installation Guide TU-S9 Quick Installation Guide TU-S9 Table of of Contents Contents Español... 1 1. Antes de iniciar... 1 2. Instalación del Hardware... 2 Troubleshooting... 5 Version 11.08.2007 1. Antes de iniciar Contenidos

Más detalles

ENKVM-USBB. 2-Port USB KVM switch with Easy Switch and Cable. User Guide

ENKVM-USBB. 2-Port USB KVM switch with Easy Switch and Cable. User Guide ENKVM-USBB 2-Port USB KVM switch with Easy Switch and Cable User Guide i Package Contents 1 ENKVM-USBB 2-Port USB KVM Switch with Easy Switch and Cable 1 User Guide Requirements Console A VGA, SVGA, XGA,

Más detalles

Agustiniano Ciudad Salitre School Computer Science Support Guide - 2015 Second grade First term

Agustiniano Ciudad Salitre School Computer Science Support Guide - 2015 Second grade First term Agustiniano Ciudad Salitre School Computer Science Support Guide - 2015 Second grade First term UNIDAD TEMATICA: INTERFAZ DE WINDOWS LOGRO: Reconoce la interfaz de Windows para ubicar y acceder a los programas,

Más detalles

Xperia TX TV Dock DK22 Xperia T TV Dock DK23

Xperia TX TV Dock DK22 Xperia T TV Dock DK23 Guía del usuario Xperia TX TV Dock DK22 Xperia T TV Dock DK23 Contenido Introducción...3 Descripción general de TV Dock...3 Primeros pasos...4 Conexión inteligente...4 Actualización de Conexión inteligente...4

Más detalles

Guía del usuario. Xperia P TV Dock DK21

Guía del usuario. Xperia P TV Dock DK21 Guía del usuario Xperia P TV Dock DK21 Contenido Introducción...3 Descripción general de la parte posterior de TV Dock...3 Primeros pasos...4 Gestor de LiveWare...4 Actualización de Gestor de LiveWare...4

Más detalles

Save Money 2-up Single Doorhanger Set OH payday advance edition, 4 different doorhangers, Spanish

Save Money 2-up Single Doorhanger Set OH payday advance edition, 4 different doorhangers, Spanish Save Money 2-up Single Doorhanger Set OH payday advance edition, 4 different doorhangers, Spanish PACKAGE CONTENTS How to Customize 4-color doorhanger, Editable PDF (50% OFF first loan) 1-color (black)

Más detalles

Table of Contents. Español... 1. Antes de iniciar... 2. Cómo conectar... 3. Cómo utilizar el conmutador... Troubleshooting... Version 10.13.

Table of Contents. Español... 1. Antes de iniciar... 2. Cómo conectar... 3. Cómo utilizar el conmutador... Troubleshooting... Version 10.13. Quick Installation Guide TE100-S800i TE100-S810Fi Table of Contents Español... 1. Antes de iniciar... 2. Cómo conectar... 3. Cómo utilizar el conmutador... Troubleshooting... 1 1 2 3 5 Version 10.13.05

Más detalles

Manual De Usuario. Impresora Térmica OKIPOS 410. Rev. 1.00

Manual De Usuario. Impresora Térmica OKIPOS 410. Rev. 1.00 Manual De Usuario Impresora Térmica OKIPOS 410 Rev. 1.00 Precausión de Seguridad Es el contenido para prevenir el riesgo ó el daño material con el uso correcto del producto. Lo utilize con precausión.

Más detalles

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Brix Ratio Check Instructions for ColdFusion and Flavor Overload Units INSTALLATION INSTRUCTIONS Brix Ratio Check Instructions For Coldfusion, Flavorfusion and Flavor Overload Units Kit P/N 629096865 SAFETY

Más detalles

Super Mini Retractable Mouse

Super Mini Retractable Mouse Super Mini Retractable Mouse Instruction Manual 98820 www.jascoproducts.com 98820-1 2/10 Package Contents Super Mini Retractable Mouse Instruction Manual System Requirements Windows 2000, XP, Vista, Windows

Más detalles

Quick Installation Guide Internet Setup

Quick Installation Guide Internet Setup CBR-970 Wireless-N Broadband Router www.cnet.com.tw Established in California, U.S.A. since 1987 Quick Installation Guide Internet Setup What s included in the box CBR-970 Wireless N Broadband Router Quick

Más detalles

Como desempacar el Time Attendant Además de ésta guía, el empaque debe incluír lo siguiente: Time Attendant Quick Install Reference Guide

Como desempacar el Time Attendant Además de ésta guía, el empaque debe incluír lo siguiente: Time Attendant Quick Install Reference Guide Como desempacar el Time Attendant Además de ésta guía, el empaque debe incluír lo siguiente: Terminal para colectar datos Cable de comunicación Adaptador de 25 a 9-DB CD con Software Adaptador de Corriente

Más detalles

Video Server. Quick Installation Guide. English, Español

Video Server. Quick Installation Guide. English, Español Video Server Quick Installation Guide English, Español 2 Video Server NOTES Quick Installation Guide 3 Video Server Quick Installation Guide To get your Video Server up and running on an Ethernet network,

Más detalles

appkbws03 Wireless Multimedia Keyboard Set Black

appkbws03 Wireless Multimedia Keyboard Set Black appkbws03 Wireless Multimedia Keyboard Set Black Español 01 English 06 Capítulo 1. Introducción y descripción del producto Gracias por elegir el teclado inalámbrico APPKBWS03. Descripción del producto

Más detalles

El Puerto serie RS232

El Puerto serie RS232 Microcontroladores El Puerto serie RS232 M.C.. Carlos E. Canto Quintal El Puerto serie RS232 Microcontroladores STATUS CONTROL DTE DTE DCE DCE Red Red Telefónica pública pública DCE DCE DTE DTE DTE: Data

Más detalles

INSTRUCCIONES PARA ENVIAR SU PELICULA PARA LA VIDEOLIBRERIA

INSTRUCCIONES PARA ENVIAR SU PELICULA PARA LA VIDEOLIBRERIA For English version, please scroll down to page 11 (eleven) INSTRUCCIONES PARA ENVIAR SU PELICULA PARA LA VIDEOLIBRERIA Especificaciones técnicas Container format:.mp4 / tamaño de archivo no superior a

Más detalles

Guía de instalación rápida TE100-P1U

Guía de instalación rápida TE100-P1U Guía de instalación rápida TE100-P1U V2 Table of Contents Español 1 1. Antes de iniciar 1 2. Cómo se instala 2 3. Configuración del servidor de impresora 3 4. Añadir la impresora a su PC 5 Troubleshooting

Más detalles

M DJ SERIES. User Manual/Manual de Uso

M DJ SERIES. User Manual/Manual de Uso M DJ SERIES User Manual/Manual de Uso User Manual Installation 1. In order to enhance the cast function of listening to space sound, it is appropriate to set the center part of tweeter right to the position

Más detalles

BAI-220 AURICULAR INALÁMBRICO

BAI-220 AURICULAR INALÁMBRICO BAI-220 AURICULAR INALÁMBRICO Manual de usuario ESPECIFICACIONES TÉCNICAS EMISOR Frecuencia: 86 ± 0.5 MHz Modulación: FM Distancia de emisión: 30 m. Recepción de cualquier equipo de audio y video con salida

Más detalles

Guía de instalación rápida TE100-P21 3.01

Guía de instalación rápida TE100-P21 3.01 Guía de instalación rápida TE100-P21 3.01 Table of Contents Español 1 1. Antes de iniciar 1 2. Cómo se instala 2 3. Configuración del servidor de impresora 3 4. Agregue la impresora a su computadora 5

Más detalles

WL1003 NEW AUTOMÁTICO

WL1003 NEW AUTOMÁTICO WL1003 NEW AUTOMÁTICO Acaba de adquirir un equipo de conmutación de euroconectores y le damos las gracias por su elección. Para una utilización óptima de este aparato, le recomendamos que lea este manual

Más detalles

Quick Installation Guide TEG-160WS TEG-240WS H/W: C1

Quick Installation Guide TEG-160WS TEG-240WS H/W: C1 Quick Installation Guide TEG-160WS TEG-240WS H/W: C1 Table Table of Contents of Contents Español... 1. Antes de iniciar... 2. Instalación del Hardware... 3. Herramienta de gestión Web... Troubleshooting...

Más detalles

DIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual DECLUTCHABLE WORM GEAR

DIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual DECLUTCHABLE WORM GEAR DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual 2013 INSTRUCTIONS This is an instructional manual which provides general installation, operation, and maintenance

Más detalles

Save Money Tear-off Flyer Set: 8.5 x11 CA edition, 4 different flyers, Spanish

Save Money Tear-off Flyer Set: 8.5 x11 CA edition, 4 different flyers, Spanish Save Money Tear-off Flyer Set: 8.5 x11 CA edition, 4 different flyers, Spanish PACKAGE CONTENTS How to Customize 4-color flyer with tear-off coupons, Editable PDF (50% OFF first loan) 1-color (black) flyer

Más detalles

Quick Installation Guide TW100-BRV304

Quick Installation Guide TW100-BRV304 Quick Installation Guide TW100-BRV304 Table Table of Contents of Contents Español... 1 1. Antes de iniciar... 1 2. Instalación del Hardware... 2 3. Configuración del enrutador... 3 Troubleshooting... 5

Más detalles

Manual De Usuario SRP-270 Impresora Matricial Rev. 1.05

Manual De Usuario SRP-270 Impresora Matricial Rev. 1.05 Manual De Usuario SRP-270 Impresora Matricial Rev. 1.05 http://www.bixolon.com Precausión de Seguridad Es el contenido para prevenir el riesgo ó el daño material con el uso correcto del producto. Lo utilize

Más detalles

Quick Installation Guide TE100-P11 TEW-P11G H/W: V1

Quick Installation Guide TE100-P11 TEW-P11G H/W: V1 Quick Installation Guide TE100-P11 TEW-P11G H/W: V1 Table Table of Contents of Contents... 1. Antes de iniciar... 2. Cómo se instala... 3. Configuración del servidor de impresora... Troubleshooting...

Más detalles

School Preference through the Infinite Campus Parent Portal

School Preference through the Infinite Campus Parent Portal School Preference through the Infinite Campus Parent Portal Welcome New and Returning Families! Enrollment for new families or families returning to RUSD after being gone longer than one year is easy.

Más detalles

ROCK N STEREO SOUND DESK

ROCK N STEREO SOUND DESK Read and save these instructions ROCK N STEREO SOUND DESK RTA-M1102-BK INSTRUCTIONS TABLE OF CONTENTS PACKAGE INCLUDES Package Includes... 2 Specifications... 2 Product Parts List... 3 1 2 3 Product Details...

Más detalles

150Mbps Micro Wireless N USB Adapter

150Mbps Micro Wireless N USB Adapter 150Mbps Micro Wireless N USB Adapter TEW-648UBM ŸGuía de instalación rápida (1) ŸTroubleshooting (5) 1.11 1. Antes de iniciar Contenidos del paquete ŸTEW-648UBM ŸCD-ROM (herramienta y guía del usuario)

Más detalles

Sesión 3: PL 2b: Sistema para la adquisición de señales analógicas.

Sesión 3: PL 2b: Sistema para la adquisición de señales analógicas. Sesión 3: PL 2b: Sistema para la adquisición de señales analógicas. 1 Objetivo... 3 Signal Logging Basics... 3 Configure File Scope (xpc) Blocks... 3 File Scope Usage... 4 Create File Scopes Using xpc

Más detalles

GUÍA DE USUARIO USER GUIDE 2.1 Multimedia Speaker System Design Line APPSP2102

GUÍA DE USUARIO USER GUIDE 2.1 Multimedia Speaker System Design Line APPSP2102 GUÍA DE USUARIO USER GUIDE 2.1 Multimedia Speaker System Design Line APPSP2102 Gracias por adquirir los Altavoces Multimedia 2.1 de Approx. Podrá conectar sus altavoces a cualquier ordenador, walkman,

Más detalles

app ADSL2V1 COMMUNICATIONS LINE www.printyourideas.com

app ADSL2V1 COMMUNICATIONS LINE www.printyourideas.com app ADSL2V1 COMMUNICATIONS LINE www.printyourideas.com 1. CONECTAR EL ROUTER Antes de conectar el dispositivo asegúrese de que el servicio de banda ancha (ADSL), suministrado por su proveedor ISP, se encuentra

Más detalles

ENKVM-PS2. 2-Port PS/2 KVM switch with built-in cables. User Guide

ENKVM-PS2. 2-Port PS/2 KVM switch with built-in cables. User Guide ENKVM-PS2 2-Port PS/2 KVM switch with built-in cables User Guide 0 Package Contents 1 ENKVM-PS2 KVM Switch with Attached Cables 1 User Guide Requirements Console A VGA, SVGA, or Multisync monitor capable

Más detalles

manual de servicio nissan murano z51

manual de servicio nissan murano z51 manual de servicio nissan murano z51 Reference Manual To understand featuring to use and how to totally exploit manual de servicio nissan murano z51 to your great advantage, there are several sources of

Más detalles

Quick Installation Guide TE100-P1U

Quick Installation Guide TE100-P1U Quick Installation Guide TE100-P1U Table of of Contents Contents... 1. Antes de iniciar... 2. Cómo se instala... 3. Configuración del servidor de impresora... 4. Añadir la impresora de red a su PC... 1

Más detalles

Instalación rápida Antes de proceder con la instalación, es importante que sepa: Una instalación completa incluye "Drivers" y "Programa", ambos elementos se pueden instalar fácilmente desde el CD del software.

Más detalles

EP-2906 Manual de instalación

EP-2906 Manual de instalación EP-2906 Manual de instalación Con el botón situado a la izquierda se configura en el modo de cliente y de la derecha es el modo de Punto de acceso AP (nota: El USB es sólo para la función de fuente de

Más detalles

AUTOMATISMOS PRÁCTICAS DE PROGRAMACIÓN S7300 EN LENGUAJE DE CONTACTOS KOP

AUTOMATISMOS PRÁCTICAS DE PROGRAMACIÓN S7300 EN LENGUAJE DE CONTACTOS KOP AUTOMATISMOS 5º Ingeniero de Telecomunicación Curso 2003/2004 PRÁCTICAS DE PROGRAMACIÓN S7300 EN LENGUAJE DE CONTACTOS KOP 1. Control de motores 2. Control de Válvulas 3. Guía de selección de temporizadores

Más detalles

Ready. Set. Go. Vonage Box. Quick Start Guide

Ready. Set. Go. Vonage Box. Quick Start Guide Ready. Set. Go. TM Vonage Box Quick Start Guide Start here. Congratulations and welcome to Vonage! Now that you have your Vonage Box TM, it s time to enjoy exceptional home phone service, including a wide

Más detalles

CAT5 DB9 Line Driver

CAT5 DB9 Line Driver SEPTEMBER 2003 ME890A CAT5 DB9 Line Driver With Control Signals CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support, 24 hours

Más detalles

300 BPS WiFI N 2.0 USB ADAPter. User's guide. Manuel d'utilisation Guia del usario

300 BPS WiFI N 2.0 USB ADAPter. User's guide. Manuel d'utilisation Guia del usario 300 BPS WiFI N 2.0 USB ADAPter User's guide Manuel d'utilisation Guia del usario WIRELESS N USB ADAPTER MODEL # WUB-1900R Quick Install Guide 2. INSTALLATION: This section provides instructions on how

Más detalles

Quick Installation Guide TVP-SP3

Quick Installation Guide TVP-SP3 Quick Installation Guide TVP-SP3 Table of of Contents Contents Español... 1. Antes de iniciar... 2. Cómo se instala... 3. Hoja de consulta rápida... Troubleshooting... 1 1 2 4 5 Version 08.16.2006 1. Antes

Más detalles

Process Control Work Instructions Control de Procesos Instrucciones de Trabajo. for / para

Process Control Work Instructions Control de Procesos Instrucciones de Trabajo. for / para Process Control Work Instructions Control de Procesos Instrucciones de Trabajo for / para 629096898 VFCB Kit Relay Cable Harness Assy Ensamblar el Kit del Arnés de Cables del Relevador Publication Number:

Más detalles

DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY

DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: Declares that the product: Instalado de acuerdo con las

Más detalles

Quick Installation Guide Internet Setup

Quick Installation Guide Internet Setup www.cnet.com.tw Established in California, U.S.A. since 1987 CBR-971 Wireless-N 3.5G Broadband Router Quick Installation Guide Internet Setup What s included in the box CBR-971 Wireless N 3.5G Broadband

Más detalles

24-Port 10/100Mbps Web Smart PoE Switch with 4 Gigabit Ports and 2 Mini-GBIC Slots TPE-224WS

24-Port 10/100Mbps Web Smart PoE Switch with 4 Gigabit Ports and 2 Mini-GBIC Slots TPE-224WS 24-Port 10/100Mbps Web Smart PoE Switch with 4 Gigabit Ports and 2 Mini-GBIC Slots TPE-224WS ŸGuía de instalación rápida (1) ŸTroubleshooting (3) 1.12 1. Antes de iniciar Contenidos del Paquete ŸTPE-224WS

Más detalles

Quick Installation Guide TMR-121EC H/W: V1.0R

Quick Installation Guide TMR-121EC H/W: V1.0R Quick Installation Guide TMR-121EC H/W: V1.0R Table Table of Contents of Contents Español... 1. Antes de iniciar... 2. Cómo se instala... 1 1 3 Troubleshooting... 5 Version 07.09.2008 1. Antes de iniciar

Más detalles

CONTROLADORA PARA PIXELS CONPIX

CONTROLADORA PARA PIXELS CONPIX The LedEdit Software Instructions 1, Install the software to PC and open English version: When we installed The LedEdit Software, on the desktop we can see following icon: Please Double-click it, then

Más detalles

MANUAL DE INSTRUCCIONES CAJA FUERTE CF-4333

MANUAL DE INSTRUCCIONES CAJA FUERTE CF-4333 MANUAL DE INSTRUCCIONES CAJA FUERTE CF-4333 ESTIMADO CLIENTE Con el fin de que obtenga el mayor desempeño de su producto, por favor lea este manual de instrucciones cuidadosamente antes de comenzar a utilizarlo,

Más detalles

Quick Installation Guide TEW-624UB H/W:B1.1R

Quick Installation Guide TEW-624UB H/W:B1.1R Quick Installation Guide TEW-624UB H/W:B1.1R Table of of Contents Contents Español... 1. Antes de iniciar... 2. Cómo se instala... 3. Configuración inalámbrica... Troubleshooting... 1 1 2 3 5 Version 02.29.2008

Más detalles

www.totalspanishsimulator.com

www.totalspanishsimulator.com I ) Instalación / Installation Pg. 2 II ) Conexión del cableado / Plug in the connectors Pg. 4 III ) Cambiar Posición Imán / Change Magnet Position Pg. 6 IV ) Configuración de Software Pg. 7 IV ) Software

Más detalles

Quick Installation Guide TEW-623PI

Quick Installation Guide TEW-623PI Quick Installation Guide TEW-623PI Table of of Contents Contents... 1 1. Antes de iniciar... 1 2. Cómo se instala... 2 3. Cómo usar el adaptador inalámbrico... 5 Troubleshooting... 6 Version 07.21.2006

Más detalles

Quick Installation Guide. TEG-224WSplus

Quick Installation Guide. TEG-224WSplus Quick Installation Guide TEG-224WSplus Table of of Contents Contents... 1. Antes de iniciar... 2. Instalación del Hardware... 3. Herramienta de gestión Web... Troubleshooting... 1 1 2 3 6 Version 04.28.2006

Más detalles

Guía de instalación rápida TPL-303E TPL-303E2K 1.01

Guía de instalación rápida TPL-303E TPL-303E2K 1.01 Guía de instalación rápida TPL-303E TPL-303E2K 1.01 Table of Contents Español 1 1. Antes de iniciar 1 2. Cómo se instala 2 Troubleshooting 6 Version 02.19.2010 1. Antes de iniciar Contenidos del paquete

Más detalles

Instructions on How to Access and Print Your W2 Statement for Active or Terminated Employees

Instructions on How to Access and Print Your W2 Statement for Active or Terminated Employees Instructions on How to Access and Print Your W2 Statement for Active or Terminated Employees SUBJECT: ACCESSING AND PRINTING YOUR W2 STATEMENT AS AN ACTIVE EMPLOYEE PURPOSE: This document outlines the

Más detalles

Guía de instalación rápida TEW-639GR 2.01

Guía de instalación rápida TEW-639GR 2.01 Guía de instalación rápida TEW-639GR 2.01 Table of Contents Español 1 1. Antes de iniciar 2. Instalación del Hardware 1 2 3. Configuración del enrutador inalámbrico 3 Troubleshooting 5 Version 03.04.2010

Más detalles

MANUAL EASYCHAIR. A) Ingresar su nombre de usuario y password, si ya tiene una cuenta registrada Ó

MANUAL EASYCHAIR. A) Ingresar su nombre de usuario y password, si ya tiene una cuenta registrada Ó MANUAL EASYCHAIR La URL para enviar su propuesta a la convocatoria es: https://easychair.org/conferences/?conf=genconciencia2015 Donde aparece la siguiente pantalla: Se encuentran dos opciones: A) Ingresar

Más detalles

Owner s Manual (English language)

Owner s Manual (English language) Owner s Manual (English language) INTRODUCTION First of all, thank you for purchasing our product POLAR VIMA MMI 2G/3G. Here, we will explain you briefly the steps to use your new product easily and without

Más detalles

Quick Installation Guide TE100-MP1UN H/W: V1.0R

Quick Installation Guide TE100-MP1UN H/W: V1.0R Quick Installation Guide TE100-MP1UN H/W: V1.0R Table of Contents... 1. Antes de iniciar... 2. Cómo se instala... 3. Impresión... 4. Para enviar un Fax... 5. Escanear... Troubleshooting... 1 1 2 7 8 9

Más detalles

Quick Installation Guide TEW-435BRM

Quick Installation Guide TEW-435BRM Quick Installation Guide TEW-435BRM Table of of Contents Contents Español... 1 1. Antes de iniciar... 1 2. Instalación del Hardware... 2 3. Configurar el Modem... 3 4. Configuración de encriptación...

Más detalles

Quick Installation Guide TEW-638APB H/W: V1.0R

Quick Installation Guide TEW-638APB H/W: V1.0R Quick Installation Guide TEW-638APB H/W: V1.0R Table Table of Contents of Contents... 1. Antes de iniciar... 2. Instalación del Hardware... 1 1 2 Troubleshooting... 8 Version 09.10.2008 1. Antes de iniciar

Más detalles

GUÍA DE USUARIO PC-331117. Bienvenidos al mundo Perfect Choice. Antes de comenzar a usar el producto es importante que leas esta guía.

GUÍA DE USUARIO PC-331117. Bienvenidos al mundo Perfect Choice. Antes de comenzar a usar el producto es importante que leas esta guía. GUÍA DE USUARIO PC-331117 Bienvenidos al mundo Perfect Choice Antes de comenzar a usar el producto es importante que leas esta guía. Conexión 1. Inserta el transmisor en el conector para encendedor de

Más detalles

E-95MR remote control operation guide

E-95MR remote control operation guide 99300791-d EDR12010 9/12 E-95MR remote control operation guide English / Spanish [ adjustable bases ] contents E-95MR Function... 4 Receiver Unit Programming... 5 E-95MR Programming (1 remote control

Más detalles

PA600 Rugged Enterprise PDA

PA600 Rugged Enterprise PDA PA600 Rugged Enterprise PDA unitech unitech is a member of Oracle Embedded Software Licensing Program Quick Reference Guide 400577G RevB Front Left View 1 8 7 English 6 3 4 5 1 Status indicator 5 Universal

Más detalles

Quick Installation Guide TVP-SP4BK

Quick Installation Guide TVP-SP4BK Quick Installation Guide TVP-SP4BK Table of of Contents Contents... 1. Antes de iniciar... 2. Cómo se instala... 3. Cómo utilizar el teléfono para conferencias Bluetooth VoIP ClearSky... 1 1 2 8 Troubleshooting...

Más detalles

DISEÑO DE UN CRONOTERMOSTATO PARA CALEFACCIÓN SOBRE TELÉFONOS MÓVILES. Entidad Colaboradora: ICAI Universidad Pontificia Comillas.

DISEÑO DE UN CRONOTERMOSTATO PARA CALEFACCIÓN SOBRE TELÉFONOS MÓVILES. Entidad Colaboradora: ICAI Universidad Pontificia Comillas. DISEÑO DE UN CRONOTERMOSTATO PARA CALEFACCIÓN SOBRE TELÉFONOS MÓVILES Autor: Sánchez Gómez, Estefanía Dolores. Directores: Pilo de la Fuente, Eduardo. Egido Cortés, Ignacio. Entidad Colaboradora: ICAI

Más detalles

Qué viva la Gráfica de Cien!

Qué viva la Gráfica de Cien! Qué viva la Gráfica de Cien! La gráfica de cien consiste en números del 1 al 100 ordenados en cuadrilones de diez números en hileras. El resultado es que los estudiantes que utilizan estás gráficas pueden

Más detalles

G-SMR-2 CUSTOM remote control operation guide

G-SMR-2 CUSTOM remote control operation guide 99300822-e EDR12009 8/12 G-SMR-2 CUSTOM remote control operation guide English / Spanish [ adjustable bases ] contents G-SMR-2 Custom Function... 4 Receiver Unit Programming... 5 G-SMR-2 Custom Programming

Más detalles

Steps to Understand Your Child s Behavior. Customizing the Flyer

Steps to Understand Your Child s Behavior. Customizing the Flyer Steps to Understand Your Child s Behavior Customizing the Flyer Hello! Here is the PDF Form Template for use in advertising Steps to Understanding Your Child s Behavior (HDS Behavior Level 1B). Because

Más detalles

Matemáticas Muestra Cuadernillo de Examen

Matemáticas Muestra Cuadernillo de Examen Matemáticas Muestra Cuadernillo de Examen Papel-Lápiz Formato Estudiante Español Versión, Grados 3-5 Mathematics Sample Test Booklet Paper-Pencil Format Student Spanish Version, Grades 3 5 Este cuadernillo

Más detalles

manual de agua potable y saneamiento Most of the time, manual de agua potable y saneamiento is just instructions regarding how to install the system.

manual de agua potable y saneamiento Most of the time, manual de agua potable y saneamiento is just instructions regarding how to install the system. manual de agua potable y saneamiento Most of the time, manual de agua potable y saneamiento is just instructions regarding how to install the system. 2 manual de agua potable y saneamiento MANUAL DE AGUA

Más detalles

GIANT-100 Series Impresora Térmica de Recibo

GIANT-100 Series Impresora Térmica de Recibo 1 GIANT-100 Series Impresora Térmica de Recibo Manual de Usuario V1.0_es Todas las especificaciones están sujetas a cambios sin previo aviso. Modelos: GIANT-100D, GIANT-100DB, GIANT-100S, GIANT-100SB,

Más detalles

Quick Installation Guide TV-IP400 TV-IP400W

Quick Installation Guide TV-IP400 TV-IP400W Quick Installation Guide TV-IP400 TV-IP400W Table of of Contents Contents Español... 1. Antes de iniciar... 2. Instalación del Hardware... 3. Configuración de la cámara Internet... Troubleshooting... 1

Más detalles

Cómo comprar en la tienda en línea de UDP y cómo inscribirse a los módulos UDP

Cómo comprar en la tienda en línea de UDP y cómo inscribirse a los módulos UDP Cómo comprar en la tienda en línea de UDP y cómo inscribirse a los módulos UDP Sistema de registro y pago Este sistema está dividido en dos etapas diferentes*. Por favor, haga clic en la liga de la etapa

Más detalles

Guía de instalación rápida TEW-691GR 1.01

Guía de instalación rápida TEW-691GR 1.01 Guía de instalación rápida TEW-691GR 1.01 Table of Contents Español 1 1. Antes de iniciar 1 2. Instalación del Hardware 2 3. Configuración del enrutador inalámbrico 3 Troubleshooting 5 Version 05.11.2010

Más detalles

Start. Démarrer. Iniciar.

Start. Démarrer. Iniciar. Zune CABLE Pack câble de synchronisation Zune cable de sincronizacíon Zune Start. Démarrer. Iniciar. To sync and charge, connect the sync cable to your Zune and your PC. Just need to charge? Connect your

Más detalles

Stem Glass Holder (SGH36U)

Stem Glass Holder (SGH36U) THESE INSTRUCTIONS SHOULD ONLY BE PRINTED USING ADOBE ACROBAT AND SHOULD NOT BE FAXED OR REPRODUCED ON A DIGITAL COPIER. AMERICAN WOODMARK CORPORATION PROVIDES THESE INSTRUCTIONS ON AN AS IS BASIS AND

Más detalles

EMPLOYER & EMPLOYEE RETIREMENT PLAN TAX CREDITS

EMPLOYER & EMPLOYEE RETIREMENT PLAN TAX CREDITS EMPLOYER & EMPLOYEE RETIREMENT PLAN TAX CREDITS For employers who set up and maintain retirement plans, the setup costs, annual administrative costs, and retirement-related employee education costs are

Más detalles

USER S MANUAL FEATURING NEAR FIELD AUDIO TECHNOLOGY

USER S MANUAL FEATURING NEAR FIELD AUDIO TECHNOLOGY USER S MANUAL FEATURING NEAR FIELD AUDIO TECHNOLOGY by 1. INTRODUCTION The Boost speaker uses patent pending NearFA technology. Simply place a mobile device such as an iphone on top of the Boost speaker

Más detalles

Quick Installation Guide TEW-631BRP

Quick Installation Guide TEW-631BRP Quick Installation Guide TEW-631BRP Table of of Contents Contents... 1. Antes de iniciar... 2. I nstalación del enrutador... 3. Añadir el enturador a una red 192.168.1.x existente... Troubleshooting...

Más detalles

BWATCH-BT1 SMARTWATCH BLUETOOTH. Manual de Instrucciones

BWATCH-BT1 SMARTWATCH BLUETOOTH. Manual de Instrucciones BWATCH-BT1 SMARTWATCH BLUETOOTH Manual de Instrucciones FUNCIONES Y CONTROLES 1. Altavoz 2. Encendido/Apagado 3. Entrada USB/Auriculares 4. Atrás 5. Botón Home 6. Botón Llamada 7. Micrófono 8. Botón RESET:

Más detalles

Manual de Arduino Wifly Shield

Manual de Arduino Wifly Shield Manual de Arduino Wifly Shield Material necesario: Arduino UNO. Wifly shield Software requerido en la PC: Arduino IDE v.1.0.1 Librería Wifly Alpha2 Preparando el hardware: Como se puede ver 4 LEDs parpadean

Más detalles

Guía de instalación rápida TEG-PCITXR TEG-PCITXRL 3.02

Guía de instalación rápida TEG-PCITXR TEG-PCITXRL 3.02 Guía de instalación rápida TEG-PCITXR TEG-PCITXRL 3.02 Table of Contents Español 1 1. Antes de iniciar 1 2. Cómo se instala 2 Troubleshooting 5 Version 03.18.2010 1. Antes de iniciar ENGLISH Contenidos

Más detalles

KMR SCA-05 Mounting Instructions Instrucción de Montaje Instruções de Montagem 0899.4897

KMR SCA-05 Mounting Instructions Instrucción de Montaje Instruções de Montagem 0899.4897 0899.4897 KMR SCA-05 Mounting Instructions Instrucción de Montaje Instruções de Montagem 0899.4897 KMR SCA-05 Mounting Instructions Instrucción de Montaje Instruções de Montagem The KMR SCA-05 kit is a

Más detalles

Flashcards Series 3 El Aeropuerto

Flashcards Series 3 El Aeropuerto Flashcards Series 3 El Aeropuerto Flashcards are one of the quickest and easiest ways to test yourself on Spanish vocabulary, no matter where you are! Test yourself on just these flashcards at first. Then,

Más detalles

Garage Door Monitor Model 139.21242

Garage Door Monitor Model 139.21242 Garage Door Monitor Model 139.21242 To prevent possible SERIOUS INJURY or DEATH from a closing garage door: NEVER permit children to operate or play with door control push buttons or remote control transmitters.

Más detalles

Sistemas de impresión y tamaños mínimos Printing Systems and minimum sizes

Sistemas de impresión y tamaños mínimos Printing Systems and minimum sizes Sistemas de impresión y tamaños mínimos Printing Systems and minimum sizes Para la reproducción del Logotipo, deberán seguirse los lineamientos que se presentan a continuación y que servirán como guía

Más detalles

Quick Installation Guide TV-IP301 TV-IP301W

Quick Installation Guide TV-IP301 TV-IP301W Quick Installation Guide TV-IP301 TV-IP301W Table of of Contents Contents Español... 1. Antes de iniciar... 2. Instalación del Hardware... 3. Configuración de la cámara Internet... Troubleshooting... 1

Más detalles

3-099-783-31(1) HDMI CONTROL Guide GB US. Operating Instructions Manual de instrucciones. 2007 Sony Corporation

3-099-783-31(1) HDMI CONTROL Guide GB US. Operating Instructions Manual de instrucciones. 2007 Sony Corporation 3-099-783-31(1) HDMI CONTROL Guide Operating Instructions Manual de instrucciones GB US ES 2007 Sony Corporation Using the HDMI CONTROL Function for BRAVIA Theatre Sync To use BRAVIA Theatre Sync, set

Más detalles

Creating your Single Sign-On Account for the PowerSchool Parent Portal

Creating your Single Sign-On Account for the PowerSchool Parent Portal Creating your Single Sign-On Account for the PowerSchool Parent Portal Welcome to the Parent Single Sign-On. What does that mean? Parent Single Sign-On offers a number of benefits, including access to

Más detalles

Specifications, Installation, and Operating Instructions GrowerSELECT 230 VAC Replacement Feed Sensor With Heating Element HS09

Specifications, Installation, and Operating Instructions GrowerSELECT 230 VAC Replacement Feed Sensor With Heating Element HS09 Specifications, Installation, and Operating Instructions GrowerSELECT 230 VAC Replacement Feed Sensor With Heating Element HS09 Specifications: Operating Voltage: 200-250 VAC Frequency: 50-60 Hz Relay

Más detalles