LED TV MONITOR. (MFM TV) user manual

Transcripción

1 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site ARGENTINE www.samsung.com URUGUAY www.samsung.com PARAGUAY www.samsung.com BRAZIL CHILE800-SAMSUNG( ) From mobile BOLIVIA www.samsung.com COLOMBIA Bogotá: COSTA RICA www.samsung.com/latin (Spanish) (English) DOMINICA www.samsung.com/latin (Spanish) (English) ECUADOR www.samsung.com/latin (Spanish) (English) EL SALVADOR www.samsung.com/latin (Spanish) (English) GUATEMALA www.samsung.com/latin (Spanish) (English) HONDURAS www.samsung.com/latin (Spanish) (English) JAMAICA www.samsung.com NICARAGUA www.samsung.com/latin (Spanish) (English) PANAMA www.samsung.com/latin (Spanish) (English) PERU (Only from landline) (From HHP & landline) PUERTO RICO www.samsung.com TRINIDAD & TOBAGO1-800-SAMSUNG( ) VENEZUELA www.samsung.com LED TV MONITOR (MFM TV) user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Model Serial No Samsung Electronics Co., Ltd. All rights reserved. BN E-02 [TC350-SA]BN E-02L03.indb :41:26

2 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and specifications may be changed without notice. List of Features Media Play (USB): Allows you to play music files and pictures saved on a USB device. Important Warranty Information Regarding Television Format Viewing See the warranty card for more information on warranty terms. Wide screen format TVs (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images for more than 5% of total viewing time can cause uneven aging of your TV and leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection of television formats you use for viewing and the amount of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty. Still image warning Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below: Avoid displaying the same TV channel for long periods. Always try to display a full screen image. Reduce brightness and contrast to avoid the appearance of after-images. Use all TV features designed to reduce image retention and screen burn. Refer to the e-manual for details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Other Warnings The actual appearance of the TV may differ from the images in this manual, depending on the model. Be careful when you touch the TV. Some parts can be somewhat hot. [TC350-SA]BN E-02L03.indb :41:26

3 Contents Accessories and Cables... 4 Installing the stand... 4 Attaching a Wall Mount/Desktop Stand... 5 Connecting to an AV Device... 6 Connecting to Headphone... 8 Connecting to a PC... 9 Connecting the Antenna or Cable Connection Connecting the Power Cord Viewing the Control Panel The Remote Control Buttons How to Navigate Menus Setup (Initial Setup) Changing the Input Source Source Edit Name Information Troubleshooting Storage and Maintenance Anti-theft Kensington Lock Specifications License Subtitle and Media Contents file formats, and Codec English - 3 [TC350-SA]BN E-02L03.indb :41:26

4 Accessories and Cables Please make sure the following items are included with your product. If any items are missing, contact your dealer. The items colors and shapes may vary depending on the model. Make sure that there are no accessories hidden behind or under packing materials after you open the box. Remote Control & Batteries (AAA x 2) User Manual Power Cord Warranty Card / Safety Guide D-Sub Cable (Except TC301) Adapter Stand Base Stand Connector For the best cable connection to this product, use cables no thicker than the cable illustrated below: Maximum thickness inches (14mm) Installing the stand English - 4 [TC350-SA]BN E-02L03.indb :41:28

5 A Attaching a Wall Mount/Desktop Stand Preparing before installing Wall-Mount/Desktop Stand 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down. 3. Pull the stand in the direction of the arrow as shown in the figure to separate it. Attaching a Wall Mount/Desktop Stand B Wall/Desktop Stand Mount Wall mount kit/desktop stand (not supplied) For the Installation of Wall-mount, please don't use screws longer than 10mm (L10) of longitude. 4. Align wall mount/desktop stand to the Monitor/TV and firmly fix the wall mount/desktop stand by fastening the screw. 5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw. NOTE If you use screws that are longer than the standard specifications, the inside of the product may be damaged. For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage or injury. Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer. Use the wall mount according to the international specifications. English - 5 [TC350-SA]BN E-02L03.indb :41:28

6 Connecting to an AV Device TC350/TC550/TC730: Using an HDMI or an HDMI to DVI Cable: HD connection (up to 1080p) Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver Device HDMI OUT HDMI Cable (Not Supplied) HDMI IN 2(MHL) Device HDMI to DVI Cable (Not Supplied) DVI OUT AUDIO OUT R-AUDIO-L R W Audio Cable (Not Supplied) HDMI IN 1 (DVI), HDMI IN 2 (MHL) / PC/DVI AUDIO IN For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. Audio cable is not available for TC301 model. The picture may not display normally (if at all) or the audio may not work if you connect an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. This product supports the Mobile High-Definition Link (MHL) function via an HDMI-MHL cable. Note that the MHL function is supported by the HDMI IN 2 (MHL) port only. The MHL function lets you display a mobile device's screen via the HDMI IN 2 (MHL) port on the TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL function. For more detailed information, see "Using the MHL function" in e-manual. When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But if you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically. To view an original size, select Screen Fit in the Picture Size menu (Menu Picture Picture Size). If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this case, the TV may work differently than when you use MHL devices via a MHL cable. English - 6 [TC350-SA]BN E-02L03.indb :41:28

7 TC301: Using an HDMI or an HDMI to DVI Cable: HD connection (up to 1080p) Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver Device HDMI OUT HDMI Cable (Not Supplied) Device DVI OUT HDMI to DVI Cable (Not Supplied) HDMI IN 1 (DVI) For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. The picture may not display normally (if at all) or the audio may not work if you connect an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. English - 7 [TC350-SA]BN E-02L03.indb :41:29

8 Using a Component (up to 1080p) or an Audio / Video (480i only) Cable Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR Video Cable Stereo Cable (Not Supplied) (Not Supplied) R W Y R W R B G Stereo Cable (Not Supplied) Component Cable (Not Supplied) R W Y R W R W R B G Red White VIDEO OUT AUDIO OUT Device AUDIO OUT COMPONENT OUT Device R B G R-AUDIO-L R-AUDIO-L PR PB Y Red Blue Green When you connect a Video cable to COMPONENT / AV IN, the color of the COMPONENT / AV IN [VIDEO] jack (green) will not match the video cable (yellow). For better picture quality, we recommend the Component connection over the A/V connection. Connecting to Headphone TC350/TC550/TC730: Using a Headphone Cable Connection Headphone Cable (Not Supplied) Headphones H: You can connect your headphones to the headphone output jack on your product. While the headphones are connected, the sound from the built-in speakers will be disabled. The sound function may be restricte d when you connect headphones to the product. Headphone volume and product volume are adjusted separately. The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type. English - 8 [TC350-SA]BN E-02L03.indb :41:29

9 Connecting to a PC TC350/TC550/TC730: Using an HDMI Cable or an HDMI to DVI Cable or a D-sub Cable Connection Connecting through the HDMI cable may not be supported depending on the PC. AUDIO OUT DVI OUT Stereo Cable (Not Supplied) HDMI to DVI Cable (Not Supplied) HDMI OUT HDMI Cable (Not Supplied) PC OUT D-sub Cable (Supplied) AUDIO OUT Stereo Cable (Not Supplied) NOTE For PC connection, you must use the HDMI IN 1 (DVI) jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Use the PC's speakers for audio. TC301: Using an HDMI Cable or an HDMI to DVI Cable Connection Connecting through the HDMI cable may not be supported depending on the PC. HDMI OUT HDMI Cable (Not Supplied) DVI OUT HDMI to DVI Cable (Not Supplied) NOTE For PC connection, you must use the HDMI IN 1 (DVI) jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. PC (D-Sub) input is not supported. English - 9 [TC350-SA]BN E-02L03.indb :41:30

10 Display Modes (HDMI/DVI Input) Optimal resolution:1366 x 768 pixels (T19C301 model only) Display Mode Horizontal Vertical Frequency Pixel Clock Sync Polarity Mode Resolution Frequency (KHz) (Hz) Frequency MHz (H / V) IBM 720 x Hz /+ VESA DMT 640 x Hz /- MAC 640 x Hz /- VESA DMT 640 x Hz /- VESA DMT 640 x Hz /- VESA DMT 800 x Hz /+ VESA DMT 800 x Hz /+ VESA DMT 800 x Hz /+ MAC 832 x Hz /- VESA DMT 1024 x Hz /- VESA DMT 1024 x Hz /- VESA DMT 1024 x Hz /+ VESA DMT 1280 x Hz /+ VESA DMT 1366 x Hz /+ English - 10 [TC350-SA]BN E-02L03.indb :41:31

11 Display Modes (D-Sub and an HDMI to DVI Input) Optimal resolution : 1920 X 1080 pixels Display Mode Horizontal Vertical Frequency Pixel Clock Sync Polarity Mode Resolution Frequency (KHz) (Hz) Frequency MHz (H / V) IBM 720 x Hz /+ VESA DMT 640 x Hz /- MAC 640 x Hz /- VESA DMT 640 x Hz /- VESA DMT 640 x Hz /- VESA DMT 800 x Hz /+ VESA DMT 800 x Hz /+ VESA DMT 800 x Hz /+ MAC 832 x Hz /- VESA DMT 1024 x Hz /- VESA DMT 1024 x Hz /- VESA DMT 1024 x Hz /+ VESA DMT 1152 x Hz /+ MAC 1152 x Hz /- VESA DMT 1280 x Hz /+ VESA DMT 1280 x Hz /+ VESA DMT 1280 x Hz /+ VESA DMT 1280 x Hz /+ VESA DMT 1366 x Hz /+ VESA DMT 1440 x Hz /+ VESA DMT 1600 x 900RB 60Hz /+ VESA DMT 1680 x Hz /+ VESA DMT 1920 x Hz /+ If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected. DPM(Display Power Management) Function does not work if you used in connection with the HDMI port of this product. English - 11 [TC350-SA]BN E-02L03.indb :41:32

12 Connecting the Antenna or Cable Connection VHF/UHF Antenna Antenna Cable (Not Supplied) or Cable ANT OUT The picture may vary depending on the model. Connecting the Power Cord Power Input English - 12 [TC350-SA]BN E-02L03.indb :41:32

13 Viewing the Control Panel TC301 / TC350 / TC550 The product color and shape may vary depending on the model. Function menu m R P Left Forwards Right Remote control sensor Power Indicator Backwards Speaker Follow these instructions facing the front of your product. Power on Adjusting the volume Turn the TV on by pressing the Controller when the TV is in standby mode. Adjusts the volume by moving the controller from side to side when the power is on. Selecting a channel Using the function menu Selecting the Menu (m) Selecting the Media Play (USB) (MEDIA.P) Selecting the Source (s) Power Off (P) Select a channel by moving the Controller backwards and forwards when the power is on. To view and use the Function menu, press and release the Controller when the power is on. To close the Function menu, press and release the Controller again. With the Function menu visible, select the MENU (m) by moving the Controller to the left. The OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the Controller to the right or left, or backwards and forwards to make additional selections. To change a parameter, select it, and then press the Controller. With the Function menu visible, select Media Play (USB) (MEDIA.P) by moving the Controller backwards. The Media Play (USB) main screen appears. Select an application by moving the Controller, and then pressing the Controller. With the Function menu visible, open the Source (s) by pushing the Controller to the right. The Source screen appears. To select a source, move the Controller back and forth. When the source you want is highlighted, press the Controller. With the Function menu visible, select Power Off (P) by pulling the Controller forwards, and then press the Controller. To close the Menu, Media Play (USB), or Source, press the Controller for more than 1 second. When selecting the function by moving the controller to the forwards/backwards/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the forwards/ backwards/left/right directions. English - 13 [TC350-SA]BN E-02L03.indb :41:33

14 TC730 The product color and shape may vary depending on the model. Power lndicator Remote control sensor Speaker Follow these instructions facing the front of your product. SOURCEE MENU y z P (Power) Remote control sensor Power Indicator Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. Displays an on-screen menu, the OSD (on screen display) of your product s features. Adjusts the volume. In the OSD, use the y buttons as you would use the l and r buttons on the remote control. Changes the channels. In the OSD, use the z buttons as you would use the d and u buttons on the remote control. Turns the product on or off. Aim the remote control towards this spot on the product. Blinks and turns off when the power is on and lights up in standby mode. Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). It is best to unplug the power cord. Useful Information ] Caution Do not press down hard on the product. y The product may become deformed and damaged. English - 14 [TC350-SA]BN E-02L03.indb :41:33

15 The Remote Control Buttons Learn where the function buttons are on your remote. Especially note SOURCE, MUTE, VOL, CH, MENU, TOOLS, E, INFO, CH LIST, RETURN, and EXIT. This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Turns the TV on and off. 1 2 SOURCE Displays and selects the available video sources. Press to directly access to channels Press to select additional channels (digital) being broadcast by the same station. For example, to select channel 54-3, press 54, then press - and 3. 0 MUTE Returns to the previous channel. Cuts off the sound temporarily. Adjusts the volume. Displays the main on-screen menu. CH LIST Change channels. Displays the channel list on the screen. View the Media Play (USB). Quickly select frequently used functions. Displays the EPG (Electronic Program Guide). Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Returns to the previous menu. Exits the menu. Use these buttons according to the direction on screen. E-MANUAL: Displays the e-manual. PIP: Use the PIP function. FÚTBOL: Enable Sports Mode for the optimal sports viewing experience. E-MANUAL PIP FÚTBOL Using these buttons in Media Play (USB) mode. Installing batteries (Battery size: AAA) NOTE Use the remote control within 7m of the TV. Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs. The color and shape may vary depending on the model. English - 15 [TC350-SA]BN E-02L03.indb :41:33

16 MUTE How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions MENUm button: Displays the main on-screen menu. 2 ENTERE and Direction buttons: Use the Direction buttons to move the cursor and highight an item. Use the Enter button to select an item or confirm the setting. 3 RETURNR button: Returns to the previous menu. 4 EXITe button: Exits the on-screen menu. E-MANUAL PIP FÚTBOL How to Operate the Main Menu (OSD - On Screen Display) Using the Remote The access steps may differ depending on the menu option you select MENUm The main menu options appear on the screen: Picture, Sound, Broadcasting, Applications, System, Support. u / d Select a main menu option on the left side of the screen with the u or d button. ENTERE Press ENTERE to access the sub-menus. u / d Select the desired sub-menu with the u or d button. u / d / l / r Adjust the value of an item with the l, r, u, or d button. The adjustment in the OSD may differ depending on the selected menu. ENTERE Press ENTERE to confirm the selection. EXITe Press EXITe. Setup (Initial Setup) When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on the TV, press the POWERP button. Before turning on the TV, make you have connected the TV to an antenna or cable connection. POWER P INFO If You Want to Rerun Setup... MENUm System Setup ENTERE English - 16 [TC350-SA]BN E-02L03.indb :41:34

17 Source Changing the Input Source Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver. TC350 / TC550 / TC730 TV / PC / AV / Component / HDMI1/DVI / HDMI2 / USB 1. Press the SOURCEE button on your remote. 2. Select a desired external input source. You can change the view mode among the All and Connected by pressing l or r button. You can only choose external devices that are connected to the TV. In Source, connected inputs will be highlighted. In Source, PC always stays activated. TC301 TV / AV / Component / HDMI1/DVI / USB 1. Press the SOURCEE button on your remote. 2. Select a desired external input source. You can change the view mode among the All and Connected by pressing l or r button. You can only choose external devices that are connected to the TV. In Source, connected inputs will be highlighted. Edit Name Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLST button on your remote when the Source list is displayed. The following selections appear under Edit Name: VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. SOURCE If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/ DVI in Edit Name. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI1/DVI in Edit Name. If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI Devices to HDMI1/DVI in Edit Name. Information You can see detailed information about the selected external device. English - 17 [TC350-SA]BN E-02L03.indb :41:35

18 How to view the e-manual E-MANUAL You can find instructions for your TV s features in the e-manual in your TV. To use the e-manual, press the E-MANUAL button on your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then press the ENTERE button. You can also access it through the menu: O MENUm Support e-manual ENTERE If you want to return to e-manual, press E-MANUAL button on remote. Screen Display TV Screen: Displays the current input source screen. Change the category. Press l or r button to select category you want. Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Options Changing the Preset Sound Modes Adjusting Sound Settings Displays the sub-menu list. Press ENTERE button to select submenu you want. } Index E Enter e Exit Operation Buttons: } Blue (Index): Displays index screen. E Enter: Select a category or sub-menu. e Exit: Exit the e-manual. How to toggle between the e-manual and the corresponding menu(s). Basic Features > Changing the Preset Picture Mode (1/1) Picture Try Now E-MANUAL a Try Now b Home { Zoom } Index L Page e Exit This function is not enabled in some menus. Picture Mode Off Backlight 12 Contrast 100 Brightness 45 Sharpness 50 Color 50 Method 1 Standard Samsung MagicAngle The displayed image may differ depending on the model. Method 2 1. If you want to use the menu that corresponds to an e-manual topic, press the red button to select Try Now. 1. Press the ENTERE button when a topic is displayed. Do you want to execute this? appears. Select Yes, and then press the ENTERE button. The OSD window appears. 2. To return to the e-manual screen, press the E-MANUAL button. 2. To return to the e-manual screen, press the E-MANUAL button. English - 18 [TC350-SA]BN E-02L03.indb :41:38

19 Viewing the Contents Basic Features > Changing the Preset Picture Mode (1/1) Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the l or r button. a Try Now b Home { Zoom } Index L Page e Exit Operation Buttons: a Red (Try Now): Displays the OSD menu that corresponds to the topic. To return to the e-manual screen, press the E-MANUAL button. b Green (Home): Moves to the e-manual home screen. { Yellow (Zoom): Magnifies a screen. } Blue (Index): Displays the Index screen. L (Page): Moves to previous or next page. e (Exit): Exit the e-manual. Using the Zoom mode When you view the e-manual instruction, press the { (button) to magnify the screen. You can scroll through the magnified screen by using the u or d buttons. To return to the previous screen, press the RETURN button. a Try Now b Home { Zoom } Index L Page e Exit How to search a keyword by using index page 1. To search for a topic, press the left or right arrow button to select a letter, and then press the ENTERE. The Index displays a list of topics and keywords that begin with the letter you selected. 2. Press the up or down arrow button to select a topic or keyword you want, and then press the ENTERE button to select a topic you want to see. 3. The e-manual page with the topic appears. To close the Index screen, press the RETURN button. English - 19 [TC350-SA]BN E-02L03.indb :41:39

20 Troubleshooting If the TV seems to have a problem, first review this list of possible problems and solutions. Also review the Troubleshooting section in the e-manual. If none of the troubleshooting tips apply, visit and then click on Support. Issues The TV won t turn on. The TV turns off automatically. There is no picture/video. The remote control does not work. The cable/set top box remote control doesn t turn the TV on or off, or adjust the volume. Solutions and Explanations Make sure the AC power cord is securely plugged in to the wall outlet and the TV. Make sure the wall outlet is working. Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to The remote control does not work below. Ensure the Sleep Timer is set to Off in the System menu. If your PC is connected to the TV, check your PC power settings. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. When watching TV from an antenna or cable connection, the TV will turn off after minutes if there is no signal. If you don't want TV to turn off, please do the following steps: System > Eco Solution > No Signal Power Off > Off. Check the cable connections. Remove and reconnect all cables connected to the TV and external devices. Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV input connections. For example, if an external device s output is HDMI, it should be connected to an HDMI input on the TV. Make sure your connected devices are powered on. Be sure to select the correct input source by pressing the SOURCE button on the remote control. Reboot the connected device by unplugging and then reconnecting the device s power cable. Replace the remote control batteries. Make sure the batteries are installed with their poles (+/ ) in the correct direction. Clean the sensor s transmission window on the remote. Try pointing the remote directly at the TV from 1.5~1.8m away. Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. Some functions and pictures shown in this manual are available on specific models only. To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB (www. samsung.com Support Downloads). English - 20 [TC350-SA]BN E-02L03.indb :41:39