Las bandas uni XLB M2 (Cerrada, Rugosa y en Forma de V) han mejorado su funcionamiento en las siguientes industrias/ aplicaciones:

Transcripción

1 uni X ramo recto Nueva generación Estándar 101 aso de 63.5 mm (2.50 pulgadas) uni X M2 a banda más fuerte del "uni-verso" a banda de tramo recto y paso 2.5 pulgadas uni X M2 se diseñó para transporte de productos pesados. Es la banda perfecta como sustituta de las cadenas de charnela de acero, cadenas de arrastre y otras tecnologías que se venían utilizando para un desgaste alto o aplicaciones pesadas. as bandas uni X M2 (Cerrada, Rugosa y en Forma de V) han mejorado su funcionamiento en las siguientes industrias/ aplicaciones: utomóvil, incluyendo bandas transportadoras de palés, transporte de personas, bandas transportadoras de automóviles, túneles de estanqueidad avado de coches, incluyendo el lavado y la limpieza interior Manipulación de material como movimiento de palés y rollos grandes de papel Cárnica (ternera y cerdo), incluyendo líneas de cuelgue y distribución de piezas Características del producto y ventajas de funcionamiento: No necesita lubricación Requiere menos potencia, gracias a sus materiales de baja fricción Reducción de tiempos muertos, gracias a su fácil mantenimiento ajo nivel de ruido Extremadamente resistente al desgaste y los impactos Sistema de engranaje único que reduce el efecto pulsante en transportadores largos Superficie rugosa, reduce el deslizamiento y permite movimientos seguros

2 Datasheet: uni X M2 C lastic Modular elt uni X M2 C elt OM-N K in and lock 6.6 N D lternative pin and lock systems and materials: Contact Customer Service. elt width ermissible tensile force Surface type: Flat Surface opening: Closed ackflex radius: mm (3.90 in) in diameter: 10 mm (0.39 in) elt weight OM-N/6.6 OM-N/SS OM-N/6.6 OM-N/SS 82 *** ICH 63.5 MM/2.50 IN SRIGH RUNNING SNDRD dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM-N N (2698 lbf). ***: uni X M1 C. = Single ink

3 Datasheet: uni X M2 Rough lastic Modular elt uni X M2 Rough elt material & color OM-N K in and lock 6.6 N D lternative pin and lock systems and materials: Contact Customer Service. elt width ermissible tensile force Surface type: Rough op Surface opening: Closed ackflex radius: mm (3.90 in) in diameter: 10 mm (0.39 in) elt weight OM-N/6.6 OM-N/SS OM-N/6.6 OM-N/SS ICH 63.5 MM/2.50 IN SRIGH SNDRD RUNNING SNDRD dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM-N N (2698 lbf). = Single ink

4 Datasheet: uni X M2 15% Rough lastic Modular elt uni X M2 15% Rough elt OM-N K in and lock 6.6 N D lternative pin and lock systems and materials: Contact Customer Service. elt width ermissible tensile force Surface type: Rough op Surface opening: 15% ackflex radius: mm (3.90 in) in diameter: 10 mm (0.39 in) elt weight OM-N/6.6 OM-N/SS OM-N/6.6 OM-N/SS ICH 63.5 MM/2.50 IN SRIGH SNDRD RUNNING SNDRD dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) dditional standard belt widths are available in steps of mm (3.94 in). dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM-N N (2698 lbf). = Single ink

5 Datasheet: uni X M2 V8 lastic Modular elt uni X M2 V8 elt material & color OM-D K in and lock 6.6 N D lternative pin and lock materials: in: SS304 elt width ermissible tensile force elt weight OM-D/6.6 OM-D/SS OM-D/6.6 OM-D/SS Z Surface type: V8 Surface opening: Closed ackflex radius: mm (4.72 in) in diameter: ø10 mm (0.39 in) Z dditional standard belt widths are available in steps of 201 mm (7.91 in) dditional non-standard belt widths are available in steps of 33.4 mm (1.31 in). General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM-D N (2698 lbf). = Single ink itch 63.5 mm/2.50 in SRIGH Standard RUNNING Standard

6 Datasheet: uni X M2 15% Rough ccessories Rubber op Flat (M1) Flat Curved elt Material & color Rubber Material & color ink Width size mm in Flat OM-N K 05 K K K Curved K Other Non Standard Rubber profiles: See uni Rubber rofile Overview. ccessories Flight H 10% Curved H R S 10% Curved Car usher Car usher Material & color H Width R S ink size mm in 10% Curved OM-D UV Y K K Car usher OM-DK O K Non Standard material and color: See uni Material and Color Overview.

7 Datasheet: uni X M2 15% Rough Sprocket No. of teeth ilot ore in mm ore size Overall diameter itch diameter Hub diameter Dimension Dimension mm in Single row/wo way Double row/wo way Molded 6 G Machined 6 N Z10 x x x Z13 x x x Z15 x x x Z20 x x x Molded Machined Non standard material and color: See uni Material and Color Overview. Other sizes are available upon request. wo-part are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 16.0 mm (0.63 in) Width of = 33.0 mm (1.30 in) Max load per shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct position: See uni ssembly Instructions for uni X. For more detailed information, contact Customer Service.