Nipper technology Air nippers - manual and automatic operation

Nipper technology Air nippers - stationary

Nipper technology Air nippers - stationary Blades for metal wire, straight Blades for metal wire, straight Product description > Straight blades that can be applied at the right angle to the gate Notes

Nipper technology Air nippers - manual and automatic operation

Nipper technology ir nippers - manual and automatic operation lades for plastic, straight lades for plastic, straight > lades with straight cutting edge for clean cuts Notes > J, L2 and 39: Standard blade

Nipper technology Selection blade shapes

Blades for plastic - nippers for manual and automatic operation PP/PE ABS GT-N [manually] GT-NR [round] GT-NS [rectangular] Angled cutting edge Laterally facing blades N3AJ N10LAB2 4 2.6 x x x N20AJ 266

Nipper technology Air shears

Nipper technology Air shears Blades for double-acting air scissors Blades for double-acting air scissors Product description > Blades for double acting air scissors > Suitable for cutting copper or steel

Nipper technology Air nippers - stationary

Nipper technology Air nippers - stationary Blades for plastic, straight Blades for plastic, straight Product description > Straight blades that can be applied at the right angle to the gate > Models with

Nipper technology Air nippers - manual and automatic operation

Nipper technology Air nippers - manual and automatic operation Pressure booster for air nippers GT-N, GT-NR, GT-NS Pressure booster for air nippers GT-N, GT-NR, GT-NS Air nippers GT-NS20 with pressure

Nipper technology Air shears

Nipper technology Air shears Blades for special air shears, single-acting Blades for special air shears, single-acting Product description > Blades for cutting synthetic materials, e.g. kevlar, aramid,

Nipper technology Air nippers - manual and automatic operation

Nipper technology Air nippers - manual and automatic operation Air nippers for manual operation Air nippers for manual operation AIR NIPPERS FOR PLASTIC AND METAL > Manually operated air nippers with safety

Grippers Sprue grippers

Grippers Sprue grippers Series 80 - miniature gripper, clamping diameter 10 mm Series 80 - miniature gripper, clamping diameter 10 mm HIGHEST GRIPPING FORCE IN RELATION TO SIZE Product description > Gripper

Grippers Sprue grippers

Grippers Sprue grippers Series 60 miniature grippers, clamping diameter 10 mm Series 60 miniature grippers, clamping diameter 10 mm Product notes > Gripper for small sprues and restricted space > Gap-free

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 50 mm, 6 air inlets - robot side Round quick-changers Ø 50 mm, 6 air inlets - robot side Product description > Manual interface between robot and gripper

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 50 mm, 6 air inlets - gripper side Round quick-changers Ø 50 mm, 6 air inlets - gripper side Product description > Manual interface between robot and

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 150 mm, 10 air inlets - robot side Round quick-changers Ø 150 mm, 10 air inlets - robot side Product description > Manual interface between robot and

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - gripper side Round quick-changers Ø 90 mm, 8 air inlets - gripper side Product description > Manual interface between robot and

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - robot side Round quick-changers Ø 90 mm, 8 air inlets - robot side S R 9 0 - A Product description > Manual interface between

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - robot side Round quick-changers Ø 90 mm, 8 air inlets - robot side S R 9 0 - A - M V Product description > Manual interface between

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 150 mm, 10 air inlets - gripper side Round quick-changers Ø 150 mm, 10 air inlets - gripper side Product description > Manual interface between robot

Grippers Gripper fingers

M5 14 20 M17x1 Ø 14 M12x1 Ø 20 Grippers Gripper fingers Gripper fingers angle stroke 35 Gripper fingers angle stroke 35 Product description > Gripper fingers in slim design for rear gripping such as in

Nipper technology Accessories

Air-nipper mounting brackets Air-nipper mounting brackets > Mounting brackets to fasten air nippers to angle clamps Item no. Clamping-Ø [mm] Weight [g] Air nippers GT-NR10H 14 38 GT-NR10L (p.263) GT-NR20H

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 150 mm, 10 air inlets - robot side - SAFE-LOCK Round quick-changers Ø 150 mm, 10 air inlets - robot side - SAFE-LOCK SECURE SAFE-LOCK ENSURES MAXIMUM

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - robot side - SAFE-LOCK Round quick-changers Ø 90 mm, 8 air inlets - robot side - SAFE-LOCK SECURE SAFE-LOCK ENSURES MAXIMUM FUNCTIONAL

Quick-change systems Series "ASR"

Quick-change systems Series "ASR" Quick-change system approx. Ø 64 mm gripper side Quick-change system approx. Ø 64 mm gripper side Illustration of quick-change system ASR, robot- and gripper side Product

Spring levelers. Non-rotating internal spring levelers - smooth body. Non-rotating internal spring levelers - smooth body.

Ø A SW G G Spring levelers Non-rotating internal spring levelers - smooth body Non-rotating internal spring levelers - smooth body Product notes > Free moving and high-load capability with ball guide technology

Quick-change systems Series "ASR"

J Quick-change systems Series "ASR" Automatic quick-change system approx. Ø 64 mm robot side Automatic quick-change system approx. Ø 64 mm robot side Depiction of quick-change system ASR, robot and gripper

Extrusion systems Connectors

Extrusion systems Connectors Angle connectors 90 with cover Angle connectors 90 with cover Product description > Elements for connection of two extrusions > No overlapping of the extrusion necessary Ordering

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 50 mm, 6 air inlets - robot side - SAFE-LOCK Round quick-changers Ø 50 mm, 6 air inlets - robot side - SAFE-LOCK SECURE SAFE-LOCK ENSURES MAXIMUM FUNCTIONAL

Quick-change systems Series ASR

Quick-change systems Series ASR MAXIMUM POSITION REPEATABILITY DUE TO AUTOMATIC CORRECTION DURING COUPLING Automatic quick-change systems Automatic quick-change systems Robot side Gripper side Product

Vacuum generation Feed ejectors

Vacuum generation Feed ejectors Feed ejectors - with a large passage Feed ejectors - with a large passage Very high suction power for high transportation throughput Product Description > Very high suction

Vacuum generation Feed ejectors

Vacuum generation Feed ejectors Feed ejectors - rotatable Feed ejectors - rotatable High suction power for handling with high leakage Product Description > High suction power for safe handling of air-permeable

Extrusion systems Accessories

Extrusion systems Accessories Extension tubes Extension tubes Product description > Extension of clamping shafts and locator pins Technical data Item no. Weight [g] Suitable locator pins GR06.020 10 GR06.001

Special grippers Standard

Special grippers Standard Bernoulli vacuum cups SX-B Bernoulli vacuum cups SX-B Housing made of anodized aluminum Product notes > Integrated vacuum generation on the Bernoulli principle > Non-contact,

Special grippers Standard

Special grippers Standard Bernoulli vacuum cups SX-B Bernoulli vacuum cups SX-B Housing made of anodized aluminum Product notes > Integrated vacuum generation on the Bernoulli principle > Non-contact,

Special grippers Standard

Special grippers Standard Bernoulli vacuum cups SX-B Bernoulli vacuum cups SX-B Housing made of anodized aluminum Product notes > Integrated vacuum generation on the Bernoulli principle > Non-contact,

Special grippers Standard

Special grippers Standard Bernoulli vacuum cups SX-B Bernoulli vacuum cups SX-B Housing made of anodized aluminum Product notes > Integrated vacuum generation on the Bernoulli principle > Non-contact,

Control technology and system monitoring Vacuum filters

Control technology and system monitoring Vacuum filters Plug-in filters Plug-in filters Product description > Trapping impurities and liquids which can be suctioned via the vacuum cup or other systems

Quick-change systems ASR series

35,5 51 24 Quick-change systems ASR series Electronic connectors for automatic quick changers Electronic connectors for automatic quick changers Display with quick-change system - robot side Display with

System monitoring Vacuum and pressure gauges

System monitoring Vacuum and pressure gauges Vacuum - and pressure gauge Vacuum - and pressure gauge With red-green indication Vacuum gauge Pressure gauge Product Description > Visual monitoring of the

Control technology Vacuum regulators

Control technology Vacuum regulators Vacuum regulators Vacuum regulators Product notes > Vacuum adjustment of consumer loads, such as vacuum cups in handling systems > Automatic compensation of fluctuations

Quick-change systems Accessories - Series SR

70-72 58-60 3,3 19,5 19 Quick-change systems Accessories - Series SR Electric plug connectors for SR90 and SR150 Electric plug connectors for SR90 and SR150 Robot side 20.535 20.536 Gripper side 20.537

Gripper arms Elbow arms

Gripper arms Elbow arms Spring-loaded elbow arms for suction cups Spring-loaded elbow arms for suction cups Product description > Components for integration of suction cups via internal threads > Spring-load

Extrusion systems Accessories

Ø B C Ø A E Extrusion systems Accessories Clamping rings for clamping elements Clamping rings for clamping elements Suitable for plate based EOAT Product description > Elements for mounting gripper components

Extrusion systems Connectors

C D F B Extrusion systems Connectors Adapter profile connectors Adapter profile connectors Product description > Elements for 90 connection of SLine with MLine or XLine extrusions > Extrusions can be moved

Electronics and sensors Sensors

Electronics and sensors Sensors Inductive sensors Inductive sensors GR04.131-S1 / S2 Product description > Sensors for sprue grippers or parallel grippers > PNP or NPN switching functions > Integrated

Quick-change systems Series S

F E C Quick-change systems Series S Wall bracket for square quick-change plates Wall bracket for square quick-change plates Wall bracket with quick-change plate Product description > Easy storing of gripping

Extrusion systems Accessories

Ø A G Extrusion systems Accessories Locator pins Locator pins Product description > Element supports positioning of gripper to handling item > Locator pins made of POM - can be adapted if required > Suitable

Special vacuum cups Special vacuum cups SX

Special vacuum cups Special vacuum cups SX Bernoulli vacuum cups Series SX-B-PK Bernoulli vacuum cups Series SX-B-PK Non-contact vacuum suction grippers for direct food contact Product Description > Integrated

Extrusion systems Special elements

Ø 10 Ø 5,5 Ø 26 h7 M17x1 Ø 20 Extrusion systems Special elements Pneumatic centering unit Pneumatic centering unit High-precision part extraction via coupling gripper and tool Display with condition monitoring

Extrusion systems Special elements

Ø 10 Ø 5,5 Ø 26 h7 M17x1 Ø 20 Extrusion systems Special elements Pneumatic centering unit Pneumatic centering unit High-precision part extraction via coupling gripper and tool Display with condition monitoring

Connectors. Cross joint connectors. Cross joint connectors. Product notes

Connectors Cross joint connectors Cross joint connectors Product notes > Elements for 90 connection of two extrusions > Extrusions can be moved in four directions after screws are loosened Technical data

Transfer Gear Pumps KF 1/4 -- KF 1/24 coated

Description The central element in numerous technical processes is the metering of liquids. PUR components, plasticisers, resins, adhesives, laquers and paints are just a few of the important liquids with

Quick-change systems Series S

Quick-change systems Series S Quick-change systems - square, robot side, without fittings Quick-change systems - square, robot side, without fittings COMPATIBLE WITH GRIPPER MOUNTING PLATES IN INDUSTRY

System monitoring Vacuum switches

System monitoring Vacuum switches Vacuum switch - digital / analog with display Vacuum switch - digital / analog with display Product Description > Monitoring of vacuum levels, e.g. in handling systems

FIPALIFT Expert. FIPALIFT Expert standard versions. FIPALIFT Expert standard versions. Product description. Ordering notes.

FIPALIFT Expert FIPALIFT Expert standard versions FIPALIFT Expert standard versions Product description > The standard versions have the standard controller, a lift height of 2.50 m and a single suspension

Quick-change system rectangle, robot side

Quick-change system rectangle, robot side compatible to star systems Product notes > Manual interface between robot and gripper system > Minimised downtime due to fast gripper change > Gripper side not

Fastening elements vacuum cups Suspensions

Fastening elements vacuum cups Suspensions Suspensions with internal spring and threaded connection SZ-NIV-I Suspensions with internal spring and threaded connection SZ-NIV-I Bestseller Product notes >

Quick-change systems Series S

Quick-change systems Series S Gripper mounting plates - spring-loaded Gripper mounting plates - spring-loaded COMPATIBLE WITH GRIPPER MOUNTING PLATES IN INDUSTRY STANDARD SIZE GR-1 Product description

Interruptores de Corte al Aire NA1 > >>

l1 l2 EJEMPLO DE PEDIDO Ref. Final B B d1= 3 B B d1=12,0

B-111 BROCA METAL DURO DIN 6539 SOLID CARBIDE TWIST DRILL DIN 6539 Broca de metal duro (K10/20) corta, tipo N, DIN 6539. Broca rectifi cada de una pieza en bloque con superfi cie pulida, corte a derecha

Quick-change systems Series S

Quick-change systems Series S Gripper mounting plates Gripper mounting plates COMPATIBLE WITH INDUSTRY STANDARD QUICK CHANGE SYSTEMS Base plate with pre-located, center-punched holes Product description

Linear technology At a glance

Linear technology At a glance FIPA Linear technology > Double-acting linear units for precise approach of grippers to the workpiece > Single-acting lifting cylinders for suction cups for level compensation

MAG-TEX TYPE MAG-TEX 130 TYPE MAG-TEX 240 TYPE. The quick mold change system for thermoplastics. Stable up to 130 C Technical Specifications

TYPE MAG-TEX Magnetic Plate - Magnetplatte TYPE MAG-TEX 130 TYPE MAG-TEX 240 The quick mold change system for thermoplastics. Stable up to 130 C Technical Specifications For Injection and transfer molding

Metal sheet vacuum cup

Blechsauger Metal sheet vacuum cup Metal sheet vacuum cups ø 18 mm for vacuum carpet Technische Daten / Technical Specifications Artikel-Nummer Item number Material Material Härte [ Shore A] Hardness [

Series Bellows vacuum cups SB

Series Bellows vacuum cups SB Bellows vacuum cups, universal, 2.5 bellows Series SBU 2 Bellows vacuum cups, universal, 2.5 bellows Series SBU 2 Product Description Universal bellows vacuum cups with 2.5

Holzsauger Wood Vacuum Cup Seperation Vacuum Cup 270.380 40 G1/4 G1/2 102.160.380.4 25,5 Ø 38 Ø 120 Ø 160 Art.-Nr. / Item no. 102.160.380.4 Art.-Nr. / Item no. 270.380 Bezeichnung / Description Trennsauger

WFR WFR. Main Technical Features WATER FLOW REGULATOR - WASSERDURCHFLUSSREGLER TYPE

WATER FLOW REGULATOR - WASSERDURCHFLUSSREGLER COUPLING TECHNOLOGY www.rtc-tec.com Water Flow Regulator - Wasserdurchflussregler TYPE WFR Main Technical Features Tube made of polyamide (Standard) Bodies

FUSIBLES DE CUCHILLA NH gg 690 V CON PERCUTOR NH KNIFE TYPE gg 690V FUSE-LINKS WITH STRIKER

FUSIBLES DE CUCHILLA NH gg 690 V CON PERCUTOR NH KNIFE TYPE gg 690V FUSE-LINKS WITH STRIKER FICHA TÉCNICA / TECHNICAL DATA SHEET DF, S.A C/. Silici, 67-69 08940 CORNELLA DEL LLOBREGAT BARCELONA (SPAIN)

FUSIBLES DE CUCHILLA NH gg 690 V (Ind. Sup.) NH KNIFE TYPE gg 690V FUSE-LINKS (top Indic.)

FUSIBLES DE CUCHILLA NH gg 690 V (Ind. Sup.) NH KNIFE TYPE gg 690V FUSE-LINKS (top Indic.) FICHA TÉCNICA / TECHNICAL DATA SHEET DF, S.A C/. Silici, 67-69 08940 CORNELLA DEL LLOBREGAT BARCELONA (SPAIN)

CAT 5E U/UTP Patch. Unscreened Twisted Pair 125MHz. Bending radius Installation 8 x D

07.04.2006 Page 1 of 2 CAT 5E U/UTP Patch Unscreened Twisted Pair 125MHz Application Generic cabling systems. Patch and work area cable Standards EN 50173-1; ISO/IEC 11801; EN 50288-3-2; IEC61156-6; Fire

FUSIBLES DE CUCHILLA NH gg 500 V NH KNIFE TYPE gg 500V FUSE-LINKS

FUSIBLES DE CUCHILLA NH gg 500 V NH KNIFE TYPE gg 500V FUSE-LINKS FICHA TÉCNICA / TECHNICAL DATA SHEET DF, S.A C/. Silici, 67-69 08940 CORNELLA DEL LLOBREGAT BARCELONA (SPAIN) www.df-sa.es Telf.: +34-93

GR08 English

End-of-Arm-Tooling 2018.2019 GR08 English Editorial Only those who think ahead stay ahead. Competence in End-of-Arm-Tooling FIPA specializes in developing and selling high-quality products, innovative

Pressure Relief Valves SPV, SPVF direct operated

onstruction 1 Housing 2 Sliding piston 3 ompression spring 4 Set screw 5 Bleeding screw 6 Protective cap Description The pressure relief valve SPV/SPVF is a direct spring sliding piston valve. It is intended

ELEMENTOS NEUMÁTICOS Serie EB. Serie ER

Serie EB Serie ER Serie EB y ER Descripción General os elementos neumáticos Serie EB son generalmente utilizados como embragues de deslizamiento continuo y como frenos reguladores de tensión. Su diseño

EnD-OF-ARM-TOOLInG Quick-change systems The interface to the robot Round and square Also available in stainless steel Standardized frame sizes Safety ensured by SAFE-LOCK Round Item no. Diameter [mm] SAFE-LOCK

Distancia de sensado mm Grupo 220

Distancia de sensado 20-50 mm Grupo 220 Sensores de Proximidad Inductivos Conexión de 2 a 4 hilos CA/CC o CC Salida a cable o conector Protegidos contra corto circuito Sensores de Proximidad Inductivos

Table type rotary actuator. Basic type/high accuracy type. GRC/GRC-K Series. Size: 5, 10, 20, 30, 50, 80 GRC-5. N m

RRC RV3* NHS HR LN H100 HAP SA2 HA/ H LHA LHA HKP HLA/ HL HLA/ HL HEP HCP HM HM HP HLC HP H00 HL HDL HMD HJL HE CK CK CKA CKS CK CKJ CKL2 CKL2 *HC CKH2 CKL2 NCK/ SCK/CK J K Specifications Logical torque

Equipos Para Parques Tel: (81) 82988733 y 82988734

Monterrey, Nuevo León, México. Mupi fijo con 2 caras de publicidad lumínica. Una cara 1000 2200 25mm 50 EN-MP01 Mupi fijo con 2 caras de publicidad lumínica. Dos caras 1000 2200 28mm 50 Mupi fijo con 2

Distancia de sensado mm Grupo 230

SENSOREN FÜR AUTOMATION Distancia de sensado 60-120 mm Grupo 230 Sensores de Proximidad Inductivos Conexión de 2 a 4 hilos CA/CC o CC Salida a cable o conector Protegidos contra corto circuito SENSOREN

ACCESORIOS HIERRO ÍNDICE / ACCESORIOS HIERRO

ÍNDICE / ACCESORIOS BRIDA PLANA DIN PARA SOLDAR BRIDA CIEGA DIN 2527 BRIDA DE RIEGO PARA SOLDAR PN10 BRIDA DIN2576 PN10/DIN2502 16 ZINCADA PE BRIDA DE RIEGO ZINCADA P.B PVC BRIDA ROSCADA DIN 2576 PN10/16

Subfamilia109.2 CILINDROS ISO VDMA Serie MCQI2 (ø32-ø100)

Subfamilia09. CILINDROS ISO VDMA 643 Serie MCQI (ø3-ø00) MCKQI series Hexagonal rod design & Non lubrication Cylinder with hexagonal rod design enables non rotation of rod. Special housing and bushing

SAMSUNG CLX-6260FW General

SAMSUNG CLX-6260FW General Funciones Estándar Print / Copy / Scan / Fax Opcional 4.3" Touch Screen LCD / One-touch Eco Mode / Direct USB / Mobile Print Procesador Panel de operación Dual CPU (Main: 533

ALL TERRAIN CRANE ATF 220G-5 ATF 220G TON CAPACITY. Subject to change without prior notice / Sujeto a cambios sin previo aviso.

ALL TERRAIN CRANE 250 TON CAPACITY www.tdkv.com 1 Dimensions (ft, mm) / Dimensiones (ft, mm) 445/95 R 25 525/80 R 25 (16.00 R 25) SAE (20.50 R 25) 52'-3'' [15927] 49'-7'' [15121] 43'-5'' [13229] 19 18

INOX A3F. Body: "93" Vidrio templado de 4mm con junta de neopreno. "92" Policarbonato autoextingible. LINDA. Policarbonato inyectado autoextingible.

INOX A3F-93 INOX A3F-92 EMERGENCIA COMPACTA COMPACTA EMERGENCIA Características técnicas / Technical descriptions Armadura: Difusor: Marco: Acceso lámpara: Alimentación: Clase eléctrica: Equipo: Estanquidad

CORONA CD 453. Tecnología, Calidad y Compromiso.

CORONA CD 453 La corona de Diamantes está diseñada para formaciones con cementación medio a medio-duras y una abrasión media. Size 5.31/32 x 2.5/8" 7 7/8 x 4" 8.15/32 x 4" Part Number 20.411.730 20.411.746

Catalog. Tel.(01442) Angel Omael El Arcangel Querétaro CP 76147

Catalog Tel.(01442)1994724 PINS Tel.(01442)199 47 24 www.conectividadindustriam PINS Tel. (01442) 199 4724 EJECTOR PINS Tel.(01442)199 4724 EJECTOR PINS Tel.(01442)199 4724 LEADER PINS Tel. (01442)1 994724

General technical information Vacuum Technology

General technical information Vacuum Technology Units of vacuum Pascal (Pa), kilopascals (kpa), bar (bar) and millibars (mbar) are used as pressure units in vacuum technology. The conversion of these units

KP Duro Tec. Description. Construction

Description High pressure gear pumps KP Duro Tec for abrasive and poor lubricating fluids. In the year 1990, KRACHT initiated the development of high pressure gear pumps for abrasive and poor lubricating

PRODUCT DATASHEET. Low insertion terminals. Basic self-locking under TP design Receptacles for 6.3*0.8 Tabs.

4932.** PRODUCT DATASHEET Description Low insertion terminals. Basic self-locking under TP design Receptacles for 6.3*0.8 Tabs. Wire section range 1.00 2.50 mm² (AWG 18-14) Max. Insulator Ø 2.5 mm Materials,

ENCHUFE RÁPIDO HIDRAULICA CARAS PLANAS SERIE 072 RTC COUPLINGS

COUPLING TECHNOLOGY Water Pneumatic Hydraulic Electrical 072 TYPE Accessories info@hidrafluid.es 976 24 32 10 TYPE 072 QUICK COUPLINGS FOR HYDRAULIC COUPLING TECHNOLOGY www.rtc-tec.com Temperature Range

SK3 Three-way diverter forged ball valve

SK3 Three-way diverter forged ball valve SK3 SK3 Dimensions: DN04 to DN50 body: free cutting steel, heat treatable steel, S355J2G3 ball + stem: free cutting steel, stainless steel (1.4571/316Ti) sealing:

Finalmente, los Cortacircuitos tipo Expulsión McGraw, vienen provistos de herrajes de fijación tipo NEMA Clase B.

Prohibido su uso y reproducción sin permiso de FUSE CUT OUT Cortacircuito Fusible de Expulsión Serie GTC Cerámica INTRODUCCION Gracias a la continua innovación en tecnología de protección,, se encuentra

y al excelente acabado superficial obtenido. Los tres tipos (con agujero - un labio - tres labios) resultan de un mismo concepto :

44 COUNTERSINKING - COUNTERBORING T he magafor countersinks are well-known thanks to their performance and the super-finish they achieve. The three types (with hole-single flute-three flutes) result from

Finalmente, los Cortacircuitos tipo Expulsión McGraw, vienen provistos de herrajes de fijación tipo NEMA Clase B.

Prohibido su uso y reproducción sin permiso de Serie GTS SILICON RUBBER INTRODUCCION Gracias a la continua innovación en tecnología de protección,, se encuentra a la vanguardia del desarrollo de los Cortacircuitos

DESIGNACIÓN Y NUMERACIÓN DE EQUIPOS

DESIGNACIÓN Y NUMERACIÓN DE EQUIPOS 1. NUMERACIÓN DE LAS UNIDADES Ejemplo Nombre de la Unidad raccionamiento de naftas de CC Aminas C Número U-7600 U-7700 2. IDENTIICACIÓN Y NUM ERACIÓN DE EQUIPOS 2.1.

(Inoxidable - Cobre - Plástico)

Fundada en 1952 (Inoxidable Cobre Plástico) (Stainless steel Copper Plastic) C.29 (Rev.0 Ed. 113) Acero inoxidable A213 A269 Stainless steel Tubos de acero inoxidable austenítico A 269 resistente a la

HEXAGON HEAD SCREWS DIN 933 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30

Gtión d Copra HEXAGON HEAD SCREWS DIN 933 STRENGTH GRADE 8.8 10.9 12.9 S M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 0.7 0.8 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5 2.8 3.5 4 5.3 6.4 7.5 8.8 10

ANTENAS UHF BASE SIRIO CX 410

ANTENAS UHF BASE SIRIO CX 410 CARACTERISTICAS Antena para base mono banda UHF / M Omnidireccional, baja ganancia Se suministra ajustada de fábrica Protección contra descargas estáticas DC-Ground Fabricada

MOTOR ORBITAL OMH DANFOSS OMH Technical Information A Wide Range of Hydraulics Motors

Wide Range of Hydraulics Motors F 31 245 Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can offer more than 3 different

NK-1. NK, Carro paralelo X (Serie pesada)

NK-1 84 8 256 220 280 113 210 Carro paralelo X automático recorrido 130 210 Recorrido X [mm] 130 Máx. peso [kg] 105 Máx. presión trabajo [kg] 800 Peso [kg] 17 NK-2 85 200 240 276 340 129 244 Carro paralelo