ENCHUFE RÁPIDO HIDRAULICA CARAS PLANAS SERIE 072 RTC COUPLINGS

ENCHUFE RÁPIDO HIDRAULICA SERIE 103 RTC COUPLINGS Enchufes para descompresión bajo presión residual

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories QUICK COUPINGS FOR TEMPERATURE REGUATION www.rtc-tec.com Temperature Range -20 C +100 C (-5 F +210 F ) Nitril (N) -10 C + C (+ F

ENCHUFE RÁPIDO SERIE 097 RTC COUPLINGS

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories QUICK COUPINGS FOR TEMPERATURE REGUATION www.rtc-tec.com Temperature Range FPM (V) Working Pressure RTC.08 Working Pressure Stainless

ENCHUFE RÁPIDO SERIE 098 RTC COUPLINGS

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories QUICK COUPINGS FOR TEMPERATURE REGUATION www.rtc-tec.com Temperature Range FPM (V) Working Pressure - RTC.06 RTC.08 RTC.12 Working

ENCHUFE REFRIGERACION INOXIDABLE SERIE 105 RTC COUPLINGS

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories .......... QUICK COUPINGS FOR TEMPERATURE REGUATION www.rtc-tec.com Type Couplings are leak tight on connection and disconnection

ENCHUFE RÁPIDO SERIE 106 RTC COUPLINGS. Enchufe rápido de agua de alto cuadal 3/4" - 4"

COUPING TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories ...... QUICK COUPINGS FOR TEMPERATURE REGUATION COUPING TECHNOOGY Temperature Range -20 C +00 C (-4 F +22 F ) Nitril (N) Working Pressure

Flow Rate in l / min

Compatible Cejn 125 Temperature Range Nitrile (N) Working Pressure 2,000 Bar (200 MPa - 29,000 PSI) -20 C + 100 C (- 4 F + 212 F) Technical Specifications & Advantages - Ultimate High Pressure (UHP) dripless

TYPE COUPLING TECHNOLOGY. One hand Connection Push-pull Disconnection. Ein-Hand Kuppeln Push-Pull Lösen. ENCHUFE RÁPIDO SERIE 108 RTC COUPLINGS

COUPING TECHNOOGY One hand Connection -pull Disconnection Ein-Hand Kuppeln - ösen Water Pneumatic Hydraulic Electrical Accessories 976 32 ..07... QUICK COUPINGS FOR HYDRAUIC COUPING TECHNOOGY Temperature

Flow Rate in l / min

Compatible Cejn 117 Temperature Range Nitrile (N) Working Pressure 1,000 Bar (100 MPa - 14,503PSI) Flow size rtc type 082.04 4.0 mm -20 C + 100 C (- 4 F + 212 F) Technical Specifications & Advantages -

ENCHUFE RÁPIDO SERIE 123 RTC COUPLINGS

COUPING TECHNOOGY Pneumatic Hydraulic Electrical Accessories .. 101. QUICK COUPINGS FOR TEMPERATURE REGUATION COUPING TECHNOOGY Temperature Range - Temperaturbereich Nitrile (N) -20 C +100 C (- 4 F +2

RTC COUPLINGS SERIE 093 QUICK CONNECT TECHNOLOGY

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories 97 32 QUICK COUPINGS FOR TEMPERATURE REGUATION Temperature Range -5 C +180 C (+23 F +35 F ) FPM (V) Working Pressure RTC.08 Flow

Compatible Cejn 116 Temperature Range Nitrile (N) Working Pressure 1,500 Bar (150 MPa - 21,755PSI) -20 C + 100 C (- 4 F + 212 F) Technical Specifications & Advantages - Ultimate High Pressure (UHP) dripless

ENCHUFE RÁPIDO DE REFRIGERACIÓN SERIE 102 RTC COUPLINGS

QUICK CONNECT TECHNOOGY One hand Connection Push-pull isconnection Eine Hand Kuppeln Push-Pull ösen Water Pneumatic Hydraulic Electrical Accessories 976 32 ..... QUICK COUPINGS FOR TEMPERATURE REGUATION

ENCHUFE RÁPIDO PARA SECUENCIALES SERIE 115 RTC COUPLINGS. Conectores para multiplacas de secuenciales M 115 RTC COUPLINGS

COUPING TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories QUICK COUPINGS FOR HYDRAUIC COUPING TECHNOOGY Temperature Range - C +100 C (-4 F +2 F ) Nitril (N) -10 C +180 C (+14 F +356 F ) FPM (V)

Flow Rate in l / min

Compatible Cejn 115 Temperature Range Nitrile (N) Working Pressure 1,000 Bar (100 MPa - 14,503PSI) Flow size - Nennweite rtc type 080.04 4.0 mm -20 C + 100 C (- 4 F + 212 F) Technical Specifications &

ENCHUFE RÁPIDO HIDRAULICA SERIE 070 RTC COUPLINGS

QUICK CONNECT TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories QUICK COUPINGS FOR HYDRAUIC www.rtc-tec.com Temperature Range NBR (Nitrile) FKM (Viton) EPDM ( Ethylene Propylene) CR (Neopren)

SERIE 044 RTC COUPLINGS

SERIE 044 RTC COUPLINGS TYPE 044 Temperature Range -20 C +100 C (-4 F +212 F ) Nitril (N) -10 C +180 C (+14 F +356 F ) FPM (V) Max.Working Pressure 15 bar (215 PSI) - For brass Flow size rtc type 044.11

WFR WFR. Main Technical Features WATER FLOW REGULATOR - WASSERDURCHFLUSSREGLER TYPE

WATER FLOW REGULATOR - WASSERDURCHFLUSSREGLER COUPLING TECHNOLOGY www.rtc-tec.com Water Flow Regulator - Wasserdurchflussregler TYPE WFR Main Technical Features Tube made of polyamide (Standard) Bodies

Pressure Relief Valves SPV, SPVF direct operated

onstruction 1 Housing 2 Sliding piston 3 ompression spring 4 Set screw 5 Bleeding screw 6 Protective cap Description The pressure relief valve SPV/SPVF is a direct spring sliding piston valve. It is intended

1 Suction Strainers SUS

1 Suction Strainers SUS STAUFF Filtros de aspiración SUS Diseñado como elementos de filtro de succión en el tanque para su instalación directa en las líneas de succión de las bombas; siempre debe instalarse

SK3 Three-way diverter forged ball valve

SK3 Three-way diverter forged ball valve SK3 SK3 Dimensions: DN04 to DN50 body: free cutting steel, heat treatable steel, S355J2G3 ball + stem: free cutting steel, stainless steel (1.4571/316Ti) sealing:

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - robot side Round quick-changers Ø 90 mm, 8 air inlets - robot side S R 9 0 - A Product description > Manual interface between

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - robot side Round quick-changers Ø 90 mm, 8 air inlets - robot side S R 9 0 - A - M V Product description > Manual interface between

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 50 mm, 6 air inlets - robot side Round quick-changers Ø 50 mm, 6 air inlets - robot side Product description > Manual interface between robot and gripper

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 50 mm, 6 air inlets - gripper side Round quick-changers Ø 50 mm, 6 air inlets - gripper side Product description > Manual interface between robot and

PVC-U FOOT CHECK VALVES UNIBLOCK SERIES FIG. Parts espiece Material 1 Body Cuerpo PVC-U Cone Cono de cierre PVC-U 3 Spring Muelle Stainless

PVC-U CHECK VALVES UNIBLOCK SERIES PVC-U Check valves - Uniblock Series Válvulas anti-retorno PVC-U - Serie Uniblock Sizes Solvent cement - 11 (N15 - N1) Threaded ½ - Standards Solvent socket - Metric

Válvulas de Flotador / Float Valves

Válvula de flotador en latón Cod. V80.01 varilla roscada Brass float valve Cod. V80.01 threaded end Válvula de flotador industrial con cuerpo fabricado en fundición de latón. Obturador guiado con cierre

ARTICULO: 2109B Válvula de mariposa tipo wafer Butterfly valve wafer type

ARTICULO: 2109B Válvula de mariposa tipo wafer Butterfly valve wafer type Características 1. Válvula de mariposa tipo wafer. 2. Cuerpo de fundición EN-GJL-200 (GG-20) para montaje entre bridas ANSI 150

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 150 mm, 10 air inlets - robot side Round quick-changers Ø 150 mm, 10 air inlets - robot side Product description > Manual interface between robot and

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 90 mm, 8 air inlets - gripper side Round quick-changers Ø 90 mm, 8 air inlets - gripper side Product description > Manual interface between robot and

Quick-change systems Series SR

Quick-change systems Series SR Round quick-changers Ø 150 mm, 10 air inlets - gripper side Round quick-changers Ø 150 mm, 10 air inlets - gripper side Product description > Manual interface between robot

REFRIGERACIÓN E INYECCIÓN 05

R ELDRACHER REFRIGERACIÓN E INYECCIÓN 05 505 ADAPTADOR PARA ENCHUFE RAPIDO MACHO 50 ADAPTADOR PARA ENCHUFE RAPIDO HEMBRA 511 BEBEDERO TALADRADO B1/B1T 512 BEBEDERO TALADRADO B3/B3T 5 BEBEDERO TALADRADO

ARTICULO: 2103 Válvula de mariposa tipo wafer Butterfly valve wafer type

ARTICULO: 2103 Válvula de mariposa tipo wafer Butterfly valve wafer type Características 1. Válvula de mariposa tipo wafer. 2. Cuerpo de fundición EN-GJL-200 (GG-20) para montaje entre bridas ANSI 150

Transfer Gear Pumps KF 1/4 -- KF 1/24 coated

Description The central element in numerous technical processes is the metering of liquids. PUR components, plasticisers, resins, adhesives, laquers and paints are just a few of the important liquids with

Quick-change systems Series ASR

Quick-change systems Series ASR MAXIMUM POSITION REPEATABILITY DUE TO AUTOMATIC CORRECTION DURING COUPLING Automatic quick-change systems Automatic quick-change systems Robot side Gripper side Product

ARTICULO: 2528A Válvula de esfera paso total Bridada, ANSI Clase 150, Acero Inox Stainless Steel full port ball valve, ANSI Class 150, Flanged ends

ARTICULO: 2528A Válvula de esfera paso total Bridada, ANSI Clase 150, Acero Inox Stainless Steel full port ball valve, ANSI Class 150, Flanged ends Características 1. Válvula de esfera paso total, 2 piezas.

PVC-U Ball Valves - e-qua Series

PVC-U BALL VALVES e-qua SERIES PVC-U Ball Valves - e-qua Series Válvulas de Bola PVC-U - Serie e-qua Sizes Solvent cement D50 - D63 (DN45-DN50) Threaded 1½ - 2 Standards Solvent socket - Metric, British,

ARTICULO: 2528A Válvula de esfera paso total Bridada, ANSI Clase 150, Acero Inox Stainless Steel full port ball valve, ANSI Class 150, Flanged ends

ARTICULO: 2528A Válvula de esfera paso total Bridada, ANSI Clase 150, Acero Inox Stainless Steel full port ball valve, ANSI Class 150, Flanged ends Características 1. Válvula de esfera paso total, 2 piezas.

18 / 19. water industrial products

C A T Á L O G O 18 / 19 water industrial products portamembranas filtros multicartuchos lámparas ultravioleta membrane housing multi-cartridges filter housing ultraviolet lamps Indice / Index Portamembranas

Válvula de asiento inclinado reguladora PVC-U

PVC-U NGLE SET REGULTOR VLVES PVC-U ngle seat regulator valve Válvula de asiento inclinado reguladora PVC-U Sizes Solvent socket: (N15) Threaded: ½ (N15) Standards Solvent socket - Metric Threaded - BSP

MQS-A ISO A POPPET VALVES KEY FEATURES CARACTERÍSTICAS PRINCIPALES PLUS PERFORMANCES CARACTERÍSTICAS ADICIONALES

ISO A POPPET VALVES KEY FEATURES Reference series on the agriculture market Simple connection and disconnection by pulling back the sleeve Positive, quick connection of the male into the female by the

Productinformatie J+J AUTOMATION.

Productinformatie J+J AUTOMATION J+J AUTOMATION RVS KOGELKRAAN ARTICULO: 2025 R2034 Válvula de esfera paso total 3 piezas Inoxid Stainless steel full port ball valve, 3 piec Características 1. Válvula

Válvulas hidráulicas aplicaciones diversas

Válvulas hidráulicas aplicaciones diversas Antirretornos Reguladores de Caudal Reguladores y Divisores de Caudal Estranguladores y paracaídas Limitadora de Presión Válvulas de secuencia Válvulas sobre

0591 Tomas de presión Check-couplings

0591 Tomas de presión Check-couplings Construcción Acero 9SMnPb2K Normativa ISO 151-2 0/0 Presión a >2520 de rotura Fluidos Aceites hidraulicos y minerales. Aplicaciones Comprobación de presión en sistemas

Válvulas de Aguja / Needle Valves

Valvula de aguja Fig. V95.03 Hasta 413 bar Needle valve Fig. V95.03 Up to 413 bar El modelo 95.03 con trim aislado garantiza gran The figure 95.03 model with sealing trim ensures Fig V95.03 Ficha Técnica

MQS-F FLAT-FACE KEY FEATURES CARACTERÍSTICAS PRINCIPALES PLUS PERFORMANCES CARACTERÍSTICAS ADICIONALES

FLAT-FACE KEY FEATURES Connection is made by pushing the male coupling and disconnection by pulling back the sleeve of the female Flat mating surfaces easily wiped clean to prevent contamination and spillage

Extrusion systems Special elements

Ø 10 Ø 5,5 Ø 26 h7 M17x1 Ø 20 Extrusion systems Special elements Pneumatic centering unit Pneumatic centering unit High-precision part extraction via coupling gripper and tool Display with condition monitoring

Extrusion systems Special elements

Ø 10 Ø 5,5 Ø 26 h7 M17x1 Ø 20 Extrusion systems Special elements Pneumatic centering unit Pneumatic centering unit High-precision part extraction via coupling gripper and tool Display with condition monitoring

MOTOR ORBITAL OMEW DANFOSS OMEW Technical Information Introduction

Introduction Introduction Sauer-Danfoss is offering the OMEW motor in two different versions. Both versions are designed mainly for propel applications, but they are optimize for different conditions.

Distribuidor de salida de la bomba de la sección hidráulica Rhino SD3/XD3

Hoja de instrucciones P/N 758055_02 Distribuidor de salida de la bomba de la sección hidráulica Rhino SD3/XD3 Descripción Ver la figura. El distribuidor de salida de la bomba de la sección hidráulica Rhino

licos Hydraulic Couplers

Acoples Hidráu licos Acoples Hidráulicos Cómo Leer la Sección de Adaptadores Hidráulicos? 1 Acoples Hidráulicos 3 2 BF/BM Acoples Hidráulicos D 4 VÁLVULA - SERIE 60 Coupler - 60 Series 5 6 7 8 9 10 Código

NORTEAMÉRICA NORTH AMERICA. Racores en Acero Inoxidable Stainless Steel Fittings.

NORTEAMÉRICA NORTH AMERICA Racores en Acero Inoxidable Stainless Steel Fittings www.dicsaes.com 2 Conexiones una sola pieza Stainless steel one piece fittings CONEXIONES UNA SOLA PIEZA STAINLESS STEEL

Self-priming Centrifugal Pumps ACL

Description Series ACL, ACLD and ACLDR pumps are horizontal, self-priming segmental-type side-channel pumps. They are manufactured single and multiple staged. In type ACL, the shaft runs on the drive side

Válvula de esfera paso total Bridada, Acero Inoxidable Stainless Steel full port ball valve, Flanged ends

Válvula de esfera paso total Bridada, Acero Inoxidable Stainless Steel full port ball valve, Flanged ends Características 1. Válvula de esfera paso total, 2 piezas. 2. Extremos Bridados según EN 1092.

SKU: GV4220. Screwed Bronze Globe Valve BSPP - NPT. PN32 Rated 0 C to 198 C (see Chart) Handwheel Operated Fluids: Air, Gas, Oil, Steam & Water

SKU: GV4220 VOLT Bronze Screwed Globe Valve VOLT Bronze -Gewindedurchgangsventil VOLT Válvula de globo de bronce atornillada VOLT Bronze Screwed Globe Valve 1/4-3" Screwed Bronze PN32 Globe Valve. 1/4-3"

GR08 English

End-of-Arm-Tooling 2018.2019 GR08 English Editorial Only those who think ahead stay ahead. Competence in End-of-Arm-Tooling FIPA specializes in developing and selling high-quality products, innovative

Linear technology At a glance

Linear technology At a glance FIPA Linear technology > Double-acting linear units for precise approach of grippers to the workpiece > Single-acting lifting cylinders for suction cups for level compensation

Quick-change systems Series "ASR"

J Quick-change systems Series "ASR" Automatic quick-change system approx. Ø 64 mm robot side Automatic quick-change system approx. Ø 64 mm robot side Depiction of quick-change system ASR, robot and gripper

053 Racores rápidos de espiga y tuerca - Metalwork - Quick fitting shaft and nut - Metalwork -

053 Racores rápidos de espiga y tuerca - Metalwork - Quick fitting shaft and nut - Metalwork - Unión oble Codo Te Cruz Pasamuros -1 - +18bar ouble union Elbow Tee Cross ulkhead Latón OT58 UNI 5705 rass

Conjuntos de filtros dobles de fluido a alta presión invertidos

Hoja de instrucciones P/N 7146627C03 - Spanish - Conjuntos de filtros dobles de fluido a alta presión invertidos Introducción Ver la figura 1. Los conjuntos de filtros dobles de Nordson han sido diseñados

Art Válvula Hidráulica con Flotador Floating Hydraulic Valve

Art. 4730-4731 Válvula Hidráulica con Flotador Floating Hydraulic Valve Características Cierre y apertura lenta y gradual para no generar sobrepresiones peligrosas en la tubería. Funcionamiento silencioso

MOTOR ORBITAL TMVW DANFOSS TMVW Technical Information

A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital motors with high torque. We can offer more than 1600 different

Gear Pumps KF 0. General characteristics. Function. Operating characteristics. Materials

Gear Pumps KF 0 Function KF 0 A pump for process engineering. In numerous technical processes dosing liquids is the focus of the task. PUR components, softeners, resins, lacquers, paints are just some

Bronze Valves válvulas de bronce

Bronze Valves válvulas de bronce INDUSTRIAL VALVES VÁLVULAS INDUSTRIALES Gate Valve - No Rising Stem Válvula de Compuerta - Vástago No Ascendente Fig. 601/602 Screwed out bonnet for size 4 Bonete roscado

MAG-TEX TYPE MAG-TEX 130 TYPE MAG-TEX 240 TYPE. The quick mold change system for thermoplastics. Stable up to 130 C Technical Specifications

TYPE MAG-TEX Magnetic Plate - Magnetplatte TYPE MAG-TEX 130 TYPE MAG-TEX 240 The quick mold change system for thermoplastics. Stable up to 130 C Technical Specifications For Injection and transfer molding

DESCRIPCIÓN DESCRIPTION FIGURA FIGURE

2918 Válvula de esfera para barril Válvula esfera de acero inox. PN-16, paso red. Construcción en acero inox AISI 316. Entrada rosca gas macho según ISO 228/1. Accionamiento mediante palomilla. Temp. máx.

Quick-change systems Series S

Quick-change systems Series S Quick-change systems - square, robot side, without fittings Quick-change systems - square, robot side, without fittings COMPATIBLE WITH GRIPPER MOUNTING PLATES IN INDUSTRY

ACCUMLÁTOROK. Acumuladores a Vejiga Serie HB/330 Bars

155 ACCUMULATORS ACCUMULATEURS ACCUMLÁTOROK Hydropneumatic Accumulator Bladder 330 bar Accumulateur à Vessie Serie /330. Serie International 330 bar ROSCA BSP VOLUMEN NITROGENO LT THREAD ORIFICE NITROGEN

Subfamilia109.2 CILINDROS ISO VDMA Serie MCQI2 (ø32-ø100)

Subfamilia09. CILINDROS ISO VDMA 643 Serie MCQI (ø3-ø00) MCKQI series Hexagonal rod design & Non lubrication Cylinder with hexagonal rod design enables non rotation of rod. Special housing and bushing

Control technology Vacuum regulators

Control technology Vacuum regulators Vacuum regulators Vacuum regulators Product notes > Vacuum adjustment of consumer loads, such as vacuum cups in handling systems > Automatic compensation of fluctuations

Type KUL. Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation

PÁGINA PRINCIPAL > Productos > Rejas para intemperie - compuertas de regulación > Compuertas accionadas mecanicamente > Compuertas antirretorno > Type KUL Type KUL FOR INSTALLATION INTO DUCTWORK Non-return

Datos Principales Main Data. Capacidad Capacity (L) 25 L 35 L. Código Code 9026910 9027010. Peso Weight (Kg) 11 14. Notas Notes

Montaje Lateral Side Mount 25 / 35 L Depósito de montaje lateral con filtro y nivel de aceite. Acabado en chapa de acero pintada. Oil Tank for side mounting, filter & level indicator are included. Finished

MOTOR ORBITAL OMP DANFOSS OMP Technical Information A Wide Range of Hydraulics Motors

Wide Range of Hydraulics Motors F 31 245 Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can offer more than 3 different

Vacuum generation Feed ejectors

Vacuum generation Feed ejectors Feed ejectors - with a large passage Feed ejectors - with a large passage Very high suction power for high transportation throughput Product Description > Very high suction

PVC-U BUTTERFLY VALVES INDUSTRIAL SERIES

PVC-U BUTTERFLY VALVES INDUSTRIAL SERIES PVC-U Butterfly Valves - Industrial Series Válvulas de Mariposa PVC-U - Serie Industrial Sizes D3 - D31 (DN0 - DN300) 2-12 (DN0 - DN300) Standards Working pressure

FLUIDAL, S.L Fax LÍNEA SANITARIA SANITARY LINE LÍNEA SANITARIA / SANITARY LINE

LÍNEA SANITARIA SANITARY LINE LÍNEA SANITARIA / SANITARY LINE CAJA / BOX CARTON 2918 Válvula de esfera para barril Válvula esfera de acero inox. PN-16, paso red. Construcción en acero inox AISI 316. Entrada

LÍNEA SANITARIA SANITARY LINE LÍNEA SANITARIA / SANITARY LINE. Polígono Indutrial O Rebullón s/n Mos - España -

LÍNEA SANITARIA SANITARY LINE LÍNEA SANITARIA / SANITARY LINE CAJA / BOX CARTON 2918 Válvula de esfera para barril Válvula esfera de acero inox. PN-16, paso red. Construcción en acero inox AISI 316. Entrada

Enchufes rápidos - Multipresa -

Enchufes rápidos - Multipresa - Estándar USA / UNI ISO 6150 B-12 Quick couplings - Multipress - Estándar USA / UNI ISO 6150 B-12 UNIVERSAL Caudal / Flow: Presión / Pressure : 2000 L/min 12bar 05500 05505

Type WGK WITH SMALL BLADE PITCH

PÁGINA PRINCIPAL > Productos > Rejas para intemperie - compuertas de regulación > Rejas para instalación en intemperie > Rejas para instalación a intemperie > Type WGK Type WGK WITH SMALL BLADE PITCH External

Special vacuum cups Special vacuum cups SX

Special vacuum cups Special vacuum cups SX Bernoulli vacuum cups Series SX-B-PK Bernoulli vacuum cups Series SX-B-PK Non-contact vacuum suction grippers for direct food contact Product Description > Integrated

GERENCIA DE INGENIERÍA Y ASEGURAMIENTO CENIT PMON ID-INS-HD-007 RELACIÓN DE REVISIONES DESCRIPCIÓN. Emisión Final. Emitido para Comentarios

GERENCIA DE INGENIERÍA Y ASEGURAMIENTO GIA-EST-00 PMON-0-0-ID-INS-HD-00 NOMBRE DEL DOCUMENTO: RELACIÓN DE REVISIONES REVISIÓN DESCRIPCIÓN FECHA 0 Emisión Final 0/0/0 A Emitido para Comentarios 0/0/0 ELABORÓ

MOTOR ORBITAL OMH DANFOSS OMH Technical Information A Wide Range of Hydraulics Motors

Wide Range of Hydraulics Motors F 31 245 Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can offer more than 3 different

FluidMonitoring Module FMM

FluidMonitoring Module FMM Descripción Los módulos FluidMonitoring de la serie FMM combinan los productos ConditionMonitoring ContaminationSensor 1000 y AquaSensor AS 1000 de HYDAC en un mismo sistema.

Quick-change systems Series S

Quick-change systems Series S Gripper mounting plates - spring-loaded Gripper mounting plates - spring-loaded COMPATIBLE WITH GRIPPER MOUNTING PLATES IN INDUSTRY STANDARD SIZE GR-1 Product description

CILINDRO SIMPLE EFECTO SIN CABEZA NI GUIAS

167 DEPÓSITOS CILINDRO SIMPLE EFECTO SIN CABEZA NI GUIAS SINGLE ACTING CYLINDER - TYPE R (WITHOUT HEAD BUSH) VÉRINS SIMPLE EFFET (SANS TÊTE NI GUIDES) CARACTERÍSTICAS TÉCNICAS / TECHNICAL SPECIFICATIONS

Nipper technology Air nippers - manual and automatic operation

Nipper technology Air nippers - manual and automatic operation Air nippers for manual operation Air nippers for manual operation AIR NIPPERS FOR PLASTIC AND METAL > Manually operated air nippers with safety

Art Válvula de Seguridad a Escuadra Art Safety Angle Valve

S.A. C/ Pedrosa A, 46-48 EDIFICIO Art. 3190 Válvula de Seguridad a Escuadra Art. 3190 Safety Angle Valve Características Fluidos: Vapor, Agua, Aire, Gas Temperatura de utilización: -10º C a + 220º C Presión

JJB EUROMANGUERAS, S.L.

RACORD MUY EXTENDIDO EN INDUSTRIAS QUIMICAS, TRANSPORTES, VERY EXTENDED COUPLING IN CHEMICAL INDUSTRIES, INDUSTRIA ALIMENTARIA, ETC. TRANSPORT, ALIMENTARY INDUSTRY, ETC. MATERIALES / MATERIALS : ALUMINIO

Brazos de carga para productos químicos (Fabricación estándar en acero inoxidable) Loading arms for chemicals (Stainless steel standard execution)

Brazos de carga para productos químicos (Fabricación estándar en acero inoxidable) Loading arms for chemicals (Stainless steel standard execution) Mod. 2374 Mod. 2385 Mod. 2385-LR BRAZOS DE CARGA SUPERIOR

Serie A SUPPORTI SUPPORTS SOPORTES CERAMICA CERAMIC CERÁMICA PORTATA CONTALITRI FLOWMETERS FLOW RATE CAUDAL CAUDALÍMETROS

CONTALITRI STANDARD IN NYLON FILETTATO - 20 BAR STANDARD FLOWMETERS 20 BAR - NYLON BODY WITH THREAD CAUDALÍMETROS ESTÁNDARD 20 BARES - CUERPO DE NYLON ROSCADO MISURA SIZE TAMAÑO FILETTO THREAD ROSCA M.

Spring levelers. Non-rotating internal spring levelers - smooth body. Non-rotating internal spring levelers - smooth body.

Ø A SW G G Spring levelers Non-rotating internal spring levelers - smooth body Non-rotating internal spring levelers - smooth body Product notes > Free moving and high-load capability with ball guide technology

Especificaciones Manufacturing Specifications. Datos Técnicos Technical Data

Regulador de Presión TA630 Pressure Regulator TA630 Especificaciones Manufacturing Specifications Datos Técnicos Technical Data Conexiones Conections Temperatura de operación Temperature rating Peso aproximado

Lavadora Whirlpool Modelo 7MLSR7533JT4

TOP AND CABINET CONTROLS AND REAR PANEL AGITATOR, BASKET AND TUB MACHINE BASE BRAKE, CLUTCH, GEARCASE, MOTOR AND PUMP WIRING HARNESS BRAKE AND DRIVE TUBE GEARCASE WATER SYSTEM Marca Capacidad Color Lavadora