FR Series SPEAKER CABINETS & ACCESSORIES

Transcripción

1 1 2017

2 FR Series SPEAKER CABINETS & ACCESSORIES

3 La serie FR 700 es una familia de sistemas de sonido autoamplificados y pasivos de rango completo en dos vías. Todos los modelos están dotados con módulos de potencia de clase D BI-AMPLIFICADOS. Los DRIVERS utilizados son de 1,75 de diafragma de polímero Técnico especial que produce menor deformación y fatiga que otros materiales metálicos convencionales, reduciendo la distorsión armónica y alargando su vida útil. Todos los modelos de la serie FR 700 están acabados con el recubrimiento plástico POLYMPACT. MUSICSON s FR range selfpowered and passive cabinets, conceived as multipurpose full range speakers. All the components used in this speaker cabinet series are made with the highest quality components. All models are equiped with class D BI-AMPLIFIED power modules. Models equiped with a high frequency compression drivers 1.75 diaphragm made with a special Technical polymer that produces less deformation and fatigue than conventional metallic materials molded in our factory. Cabinets of the FR 700 line have a reinforced finish with POLYMPACT. Todos los modelos de la linea FR están dotados de un difusor rotable en 90 grados que permite la disposición del recinto tanto en forma vertical como horizontal. Each cabinet of the FR line is equipped with a 90 degrees rotatable horn that allows vertical or horizontal placement respecting the correct dispersion of the high way.

4 FR SERIE 700 / FR 700 SERIES AUTOAMPLIFICADO / SELFPOWERED MODELO / MODEL NUMBER FR-8A FR-10A LF: 8 (2 voice coil) LF: 10 (2 voice coil) COMPONENTES / COMPONENTS HF : 1,75 Technical Polymer diaphragm compression Driver RESPUESTA FRECUENCIA / FREQ. RESPONSE 62Hz - 19KHz 52Hz - 19KHz COBERTURA / COVERAGE 70º x 40º M. POTENCIA / POWER MODULE LF: 300W RMS HF: 100W RMS + (DSP 5 Presets) CONECTORES / CONNECTORS POWER : POWERCON (NEUTRIK) / SIGNAL : XLR-3 (M-F) SPL (1W/1m) 95 db 96 db SPL PICO Máx. / MAX. SPL PEAK 125 db 128 db DIMENSIONES / DIMENSIONS (mm.) 455 x 260 x x 305 x 315 PESO / WEIGHT (kg.) COMPOSICION / ENCLOSURE MAT. ACABADO / FINISH Contrachapado 12 mm. / 12mm. Marine Birch Plywood POLYMPACT BI-COMPONENT REJILLA / METAL GRID 1mm. Epoxy negro / 1mm Black Epoxy MODELO / MODEL NUMBER FR-12A FR-15A COMPONENTES / COMPONENTS LF: 12 (3 Double side voice coil) LF: 15 (3 Double side voice coil) HF : 1,75 Technical Polymer diaphragm compression Driver RESPUESTA FRECUENCIA / FREQ. RESPONSE 54Hz 19.5KHz ( -10dB ) 50Hz 19.5KHz ( -10dB ) COBERTURA / COVERAGE 60º x 40º M. POTENCIA / POWER MODULE LF: 500W RMS HF: 200W RMS + (DSP 5 Presets) CONECTORES / CONNECTORS SPL (1W/1m) 99.5 db 100dB SPL PICO Máx. / MAX. SPL PEAK 133dB 134dB DIMENSIONES / DIMENSIONS (mm.) 630 x 365 x x 430 x 450 PESO / WEIGHT (kg.) COMPOSICION / ENCLOSURE MAT. ACABADO / FINISH REJILLA / METAL GRID Contrachapado 15 mm. / 15mm. Marine Birch Plywood POLYMPACT BI-COMPONENT 1,5 mm. Epoxy negro / 1.5mm Black Epoxy

5 FR SERIE 700 / FR 700 SERIES PASIVO / PASSIVE MODELO / MODEL NUMBER FR-8 FR-10 COMPONENTES / COMPONENTS LF: 8 (2 voice coil) LF: 10 (2 voice coil) HF : 1,75 Technical Polymer diaphragm compression Driver RMS 250W 350W POTENCIA / POWER HANDLING Prog 500W 700W Peak 1.000W 1.400W RANGO DE FRECUENCIA / FREQUENCY RANGE 65Hz - 19KHz 56Hz - 19KHz RESPUESTA EN FRECUENCIA / FREQUENCY RESPONSE 70 Hz - 18,5 KHz 60Hz - 18,5 KHz FRECUENCIA DE CORTE / CROSSOVER 1,8 KHz 1,7 KHz COBERTURA / COVERAGE 70 x 40 SPL PICO Máx. / MAX. SPL PEAK 124 db 127 db IMPEDANCIA/ IMPEDANCE 8 Ω 8 Ω CONECTORES / CONNECTORS SPEAKON 4 PIN COMPOSICION / ENCLOSURE MAT. Contrachapado 12mm / 12 mm Plywood DIMENSIONES / DIMENSIONS (mm.) 455 x 260 x x 305 x 315 PESO / WEIGHT (kg.) REJILLA / METAL GRID 1,5 mm. Epoxy negro / 1.5mm Black Epoxy ACABADO / FINISH POLYMPACT BI-COMPONENT MODELO / MODEL NUMBER FR-12 FR-15 COMPONENTES / COMPONENTS LF: 12 (3 Double side voice coil) LF: 15 (3 Double side voice coil) RMS 500W 600W POTENCIA / POWER HANDLING Prog 1.000W 1.200W Peak 2.000W 2.400W RANGO DE FRECUENCIA / FREQUENCY RANGE 50Hz - 18,5KHz 42Hz - 18,5KHz RESPUESTA EN FRECUENCIA / FREQUENCY RESPONSE 55 Hz - 19 KHz 47 Hz - 19 KHz FRECUENCIA DE CORTE / CROSSOVER 1,6 KHz 1,6 KHz COBERTURA / COVERAGE 60 x 40 SPL PICO Máx. / MAX. SPL PEAK 133 db 134 db IMPEDANCIA/ IMPEDANCE 8 Ω 8 Ω CONECTORES / CONNECTORS SPEAKON 4 PIN COMPOSICION / ENCLOSURE MAT. Contrachapado 15mm / 15 mm Plywood DIMENSIONES / DIMENSIONS (mm.) 630 x 365 x x 430 x 450 PESO / WEIGHT (kg.) REJILLA / METAL GRID 1,5 mm. Epoxy negro / 1.5mm Black Epoxy ACABADO / FINISH POLYMPACT BI-COMPONENT

6 SUBWOOFER SERIES

7 SUB - 18BS & BP-18 PASSIVE El SUB-18BS es un Sistema de subgraves concebido como refuerzo de baja frecuencia para cualquier Sistema full-range. El recinto acústico utiliza un diseño Bass-Reflex sintonizado de manera que puede llegar a bajar hasta los 35 Hz. El BP18 es un Sistema de subgraves concebido como refuerzo de baja frecuencia para cualquier sistema full-range. El recinto acústico utiliza un diseño pasa banda de 6º orden sintonizado de manera que puede llegar a bajar hasta los 32 Hz. En ambos modelos se monta un altavoz de 18 con bobina de doble cara de 4. Gracias al diseño de la bobina y el sistema de refrigeración incorporado, el altavoz puede soportar 750W RMS. The SUB-18BS is a subwoofer system conceived as a low-frequency reinforcement for any full range system. The enclosure is designed as a Bass-Reflex system, tuned so its frequency range can go as low as 35 Hz. The BP18 is a subwoofer system conceived as a low-frequency reinforcement for any full range system. The enclosure is designed as a 6th order band-pass system, tuned so its frequency range can go as low as 32 Hz. The driver used in both developments is an 18 speaker with a 4 double-sided voice coil. Thanks to this voice coil and its refrigeration system, the speaker can handle up to 750W RMS. MODEL NUMBER / MODELO COMPONENTS / COMPONENTES SUB-18BS 18 (4 Double side voice coil) BP-18 CABINET DESIGN / TIPO DE BAFLE POWER RATING / POTENCIA FREQUENCY RANGE / RANGO DE FRECUENCIA FREQUENCY RESPONSE / RESPUESTA EN FREC. BASS-REFLEX 1000W 2000W 4000W 6 th ORDER BAND-PASS 1000W 2000W 4000W Hz. ( -10dB ) Hz. ( -10dB ) Hz. ( -3dB ) Hz. ( -3dB ) SPL (1W/1m) 98dB 101,5dB Max. Peak SPL / SPL Máx. 138dB 141dB IMPEDANCE / IMPEDANCIA 8 Ω 8 Ω CONNECTORS / CONECTORES SPEAKON 4 PIN NL4MP ENCLOSURE MATERIAL / COMPOSICIÓN 18mm. Plywood DIMENSIONS / DIMENSIONES (H x W x D) 680 x 530 x x 600 x 780 WEIGHT / PESO (Kg.) 28,8 50 FINISH / ACABADO POLYMPACT BI-COMPONENT

8 SUB - 218BS PASSIVE El modelo SUB-218BS es un subwoofer de alta potencia en el que montamos 2 altavoces de 18, tropicalizados en una configuración de bass-reflex. Estos altavoces de 18 tienen una bobina móvil de 4 de doble cara, que le dan mucha más rigidez y aguante frente a altas potencias y temperaturas al conjunto móvil. SUB-218BS is a high power subwoofer using twin 18 speakers. The SUB218BS enclosure shall mount two twin 18 weather resistant speaker in a bass-reflex design to extend low frequency response. This speaker mounts a 4 double side voice coil around the former to optimize structural strenth and termal properties reducing power compression because of temperature. Combination between speaker caractheristics, enclosure design and filter network, permits this dual 18 subwoofer to respond very low frequencies with a total controlled cone excursion extending live of moving parts of speaker and reducing distortion. Also the big dimension of tunning ports, help to reduce the air velocity at this point, avoiding response compression at high power levels. MODEL NUMBER / MODELO COMPONENTES / COMPONENTS CABINET DESIGN / TIPO DE BAFLE FREQUENCY RANGE / RANGO DE FRECUENCIA FREQUENCY RESPONSE / RESPUESTA EN FRECUENCIA SUB-218BS 2x18 (4 Double Side Voice Coil) BASS-REFLEX Hz Hz. POWER RATING / POTENCIA SPL ( 1W / 1M ) Max. Peak SPL / SPL Máx. NOMINAL IMPEDANCE / IMPEDANCIA FINISH / ACABADO CONNECTORS / CONECTORES DIMENSIONS / DIMENSIONES (H x W x D) R.M.S PROG. Peak 2000W 4000W 8000W 99,5dB 140dB 8Ohm. POLYMPACT BI-COMPONENT 2 Neutrik Speakon NL4MP 125 x 60 x 64 cm WEIGHT / PESO (Kg.) 70

9 SUB - 18DA & BP-18DA AUTO-AMPLIFICADO // SELF-POWERED MUSICSON ha desarrolado este subwoofer SUB-18DA de alta eficiencia, activo autoamplificado con módulo de potencia de 1200W Contínuos y con DSP (96Khz. de frecuencia de muestreo y 64bit) de clase D última generación. Éste es un bafle de configuración REFLEX en el que montamos altavoz de 18 con bobina móvil de 100mm. (4 ) tratado especialmente para la humedad y con doble centrador. MUSICSON has developed this high efficiency Active self-powered subwoofer SUB-18DA class D 1200W continous power module with a DSP included (Sampling frequency rate 96KHz, Mixed mode 64 bit). It s a REFLEX type cabinet With a mm. voice coil (4 ) loudspeaker, Weather protected cone and double centering spider. MUSICSON ha desarrolado este subwoofer BP-18DA de alta eficiencia, activo autoamplificado con módulo de potencia de 1200W Contínuos y con DSP (96Khz. de frecuencia de muestreo y 64bit) de clase D última generación. Éste es un bafle de configuración PASA-BANDA de 6º ORDEN en el que montamos altavoz de 18 con bobina móvil de 100mm. (4 ) tratado especialmente para la humedad y con doble centrador. MUSICSON has developed this high efficiency Active self-powered subwoofer BP-18DA class D 1200W continous power module with a DSP included (Sampling frequency rate 96KHz, Mixed mode 64 bit). It s a 6 Th ORDERBAND-PASS type cabinet With a mm. voice coil (4 ) loudspeaker, Weather protected cone and double centering spider. POWER MODULE SPECS. / ESPECIFICACIONES MOD. POTENCIA MODEL NUMBER / SUB-18DA MODELO AMPLIFICATION / AMPLIFICACIÓN OUTPUT VOLTAGE / VOLTAJE SALIDA DAMPING FACT. / FACTOR DAMPING SIGNAL/NOISE RATIO / RATIO SEÑAL/RUIDO PROTECTIONS / PROTECCIONES OPERATION VOLTAGE / VOLTAJE TRABAJO BP-18DA 1 x 1200W Continuous / 1 x 2200W Peak. Class D 3rd Generation 1 x 140V Peak >1000 ( 8 Ohm load, 1KHz and below ) Better than 120dB ( A-weighted, 20Hz-20KHz, 8 Ohm load ) Short-circuit Protection, DC protection, under voltage, Temperature, overload Protection Universal Mains: VAC, 50/60Hz DSP MODULE SPECS. / ESPECIFICACIONES MOD. DSP MODEL NUMBER / SUB-18DA MODELO DSP BP-18DA Sampling frequency 96KHz, Mixed mode 64 bit. LATENCY / LATENCIA 600 µs SIGNAL CONNECTORS / CONECTORES DE SEÑAL NOMINAL INPUT LEVEL / NIVEL DE ENTRADA NOM. MAX. INPUT LEVEL / Máx. NIVEL ENTRADA NETWORK / RED NETWORK CONNECTOR / CONECTOR DE RED REMOTE CONTROL / CONTROL REMOTO MONITORING & CONTROL / MONITORIZACIÓN DYNAMIC RANGE / RANGO DINÁMICO XLR Female / XLR Male (Link) +6dBu +21dBu 10/100Mb Ethernet Star Network Ethercon RJ/45, Cat-5 Via PC (User software included) Input Level, Mute, Input Delay ( up to 800ms ), Input Limiter, 10 Input Eq. filters, Input/Output Signals Monitor 114dB (Input) / 114dB (Outputs) MODEL NUMBER / MODELO SUB-18DA BP-18DA COMPONENTS / COMPONENTES 1 x 18 Voice coil 4 (100mm) diameter. Weather protected cone. Double centering spider. FREQUENCY RESPONSE / RESPUESTA FREC. 36Hz 100Hz ( ± 3dB ). Low-Pass filter selectable via DSP Presets SPL (1W/1m) 98,5dB 101,5dB Max. Peak SPL / SPL Máx. Pico 136dB 141dB CONNECTORS / CONECTORES XLR3 + POWERCON ENCLOSURE MATERIAL / 18mm Marine Plywood COMPOSICIÓN DIMENSIONS / DIMENSIONES (mm.) 680 x 530 x x 600 x 777 WEIGHT / PESO (Kg) 30 50,5 FINISH / ACABADO POLYMPACT BI-COMPONENT

10 SUB - 218DA AUTO-AMPLIFICADO // SELF-POWERED El refuerzo de frecuencias bajas modelo SUB-218DA es un Subgrave de 2x18 en configuración REFLEX para ser usado con todos nuestros sistemas lineales. Es un nuevo sub extremadamente potente en el que hemos usado un módulo de potencia de 2x1600W RMS con fuente de alimentación UNIVERSAL (85-260V.) y en el que integramos un módulo de DSP con la tecnología más avanzada ( 96KHz de Frecuencia de muestreo y 64 bits de procesamiento de señal ) y con plataforma de control y monitorización de señales por software (DCCS). Incluimos Presets de fábrica para poder usarlo en modo OMNI o CARDIOIDE. El SUB-218DA utiliza 2 transductores de 18 capaces de admitir altos valores de desplazamiento, ensamblados con un potente conjunto magnético. Estos transductores combinan la tecnología de bobina móvil de Doble Cara de 4 y el empleo de doble elemento decentrado para optimizar su rigidez mecánica y refrigeración comparado con los transductores convencionales de un solo centrador. Para protección del cono del altavoz ante humedad, lluvia, polvo, etc, MUSICON aplica una protección especial bi-componente. Low frequencies reinforcement 2 x 18, REFLEX design Subwoofer to be used with all our Line-array systems. This is a new and extremely powerful SUB in which we have used a 2x1600 W RMS power module with UNIVERSAL (85-260V) switch mode power supply to avoid SPL losses when used with high power levels. Of course, this new Sub which is called SUB-218DA is fully equipped with DSP module with most advanced technology ( 96KHz Sample Frequency and 64 bits digital processing ) under our DCCS platform software for Control and Monitoring signals. We have also included Factory Presets to be used as Omni Mode or Cardioid Mode Subs. SUB-218DA features 2 twin long excursion 18 speakers assembled with a extremely powerful ceramic magnet capable to handle over 2000W Peak each. This devices has been designed with Double-sided 4 Voice coil as well as a Double centering spider system to optimize mechanical stiffness and wire passive cooling. In such way, Impedance value remains constant even with very high input signal levels minimizing power compression due voice coil temperature. As a protection against humidity, rain, dust, B Musicson enforce 18 cones with a durable bi-component treatment. DSP CONTROL SOFTWARE / PROGRAMA CONTROL DSP

11 CLASS D POWER AMPLIFIERS

12 ETAPAS DE POTENCIA/ POWER AMPLIFIERS CLASS D 3rd. GENERATION / DSP MUSICSON ha desarrollado una gama completa de etapas de potencia de clase D de tercera generación con fuente de alimentación universal con selección automática de VAC ; 50/60Hz. Todos los modelos incluyen un procesador DSP con conexión de Ethernet y 96Khz. de Frecuencia de muestreo, que se puede gestionar desde su propio display o con ordenador externo. MUSICSON has developed a new complete power amplifier range 3Rd. Generation Class D modules with Universal power supply VAC ; 50/60Hz. All those models with DSP Ethernet connection (96Khz. Sampling rate ) able to be managed from Its own display or external computer. Etapas de Potencia controladas por Uno o Dos DSP / Single/Double DSP Controlled Power Amplifiers. Fuente de Alimentación Universal / Universal Switch Mode Power Supply Factor Damping Mayor a 1000 / Damping Factor over 1000 Total Auto-Protección / Fully self-protected Frecuencia de Sampleo de 96Khz. / 96KHz DSP sampling Frequency Procesador Digital de 64Bit / Mixed-mode 64 bits digital processing Sistema de Monitorización y Gestión para PC y MAC / User PC MAC and Windows Monitoring and Control Software Capacidad para 80 Prests / Up to 80 Factory Presets MX Series Powered Loudspeaker Management system features the latest 3 rd generation Class D technology for pro-audio amplification delivering highest dynamic range and the lowest distortion. The Universal Switch Mode Power Supply includes an automatic AC voltage selection with an operation range from 85V to 268V delivering consistent power world-wide, fully self-protected. All MX Series power Amplifiers feature a single or double (depending on amplifier model) 96KHz sample rate, 64 bits Input DSP module with high quality A/D D/A converters. Input DSP modules have analogue Input/Link XLRs connector as well as Remote Control and Monitoring capabilities through Ethernet interface in a Star Network configuration. MX Series amplifiers can match with any kind of professional sound system by routing input signals in Dsp boards: from standard full-range cabinets to more sophisticated multi-way systems. Digital AES/EBU input signals are available under specific customer order. MUSICSON DSP CONTROL SOFTWARE, supplied with MX Series Amplifier, allows user: 1.- On-Line real-time INPUT PARAMETERS CONTROL over all MX Series Amplifiers connected in the network: X-Over and Equalization filters, Input signal Limiter and Compressor, Input signal Delay up to 275 meters, FACTORY PRESETS loading and GROUPING Functions. 2.- On-Line Real-Time Input/Output Signals and Limiters Monitoring, as well as each Output Load Impedance and Power modules Temperature. MX Series Power amplifiers feature 1 or 2 front panel displays depending on model and number of Input DSP boards, blue characters, with a precise information about Factory presets and system parameters adjustments, together with an encoder to control system presets and 5 led s with each channel Input signal level information. MUSICSON DSP CONTROL SOFTWARE (MDCS) MANAGEMENT MX-8000D amplifier is fully equipped from MUSICSON with Ethernet solution via RJ45 connectors in its back panel as well as DSP COMMAND CENTER SOFTWARE for network capabilities to enable complete filters configuration, control, convenient cabinets grouping and monitoring solutions. With its intuitive and easy-to-use graphical interface, Musicson DSP Control Software provides remote access to load also FACTORY or USER PRESETS. Each MX-8000D channel must be connected to a 100BaseT Ethernet switch using a standard CAT-5 cable. Personal Computer to run control with Musicson Dsp Control Software must also be Ethernet connected to the switch or wireless by using an access point on the same network. Remote Input and Outputs Level signal monitoring including limiting and peaking activity. Input Gain Control from MUTE to +12dB. Details inform about: - Power module temperature - Real-time load Impedance in each power amplifier output. User can store and load its own Presets with all necessary information for any speakers system. Up to 80 Factory Presets can be stored for an instant recall from MX Series amplifiers front panel display controls. * Up to 10 Optimization filters ( including X-Over Low-Pass and High-Pass ) in each MX Series Channel. * Available filters types are: Bell, Notch, Allpass, Low-Shelf, High-Shelf, Band-Pass, High-Pass and Low-Pass * Input Signal Delay up to 800ms ( 275 meters ). * Input Signal Limiter and Compressor. * Butterworth, Bessel and Linkwitz-Riley Low-Pass and High-Pass filters. * Advanced Grouping Functions are also available in Musicson Dsp Control Software for controlling multiple systems saving systems configuring time and reducing risks of errors.

13 PROCESADOR DE SEÑAL / SIGNAL PROCESSOR Procesador DSP / DSP processing 96KHz sample rate, Mixed-mode 64 bit DSP for more accurate operations LATENCIA / LATENCY 600 µµs CONECTORES SEÑAL / SIGNAL CONNECTORS XLR Female / XLR Male ( pass-through ) NIVEL ENTRADA NOMINAL / NOMINAL INPUT LEVEL +6dBu NIVEL Máx. ENTRADA / Max. INPUT LEVEL +23dBu CONECTOR RED / NETWORK CONNECTORS Ethercon RJ/45, Cat-5 and USB TIPO DE RED / NETWORK 10/100Mb Ethernet STAR configuration CONTROL REMOTO / REMOTE CONTROL Via Display and PC ( User Software included ) CONTROL RED / NETWORK CONTROL Input Level, Mute, Input delay ( up to 800ms ), Input Limiter, Input/Output signals monitor RANGO DINAMICO / DYNAMIC RANGE 120dB ( Input ) / 117dB ( Outputs ) MODULO DE POTENCIA / POWER MODULE ( Dual Input DSP ) MODELO / MODEL NUMBER MX-8000D (8000W Continous ) MX-3200D (3200W Continous ) REF. NUMBER AMPLIFICACIÓN / AMPLIFICATION 2 X 2400W + 2 X 800W + 2 X 800W 2 X DSP 800W X 4 CHANNEL 2 X DSP MODULO P. / MODULE P. 3rd generation Class D module, full bandwith PWM modulator with ultra low distortion VOLTAJE SALIDA / OUTPUT VOLTAGE LF: 160Vp / MF: 80Vp / HF: 80Vp loaded S/N Ratio Better than 120dB ( A-weighted, 20Hz 20KHz, 8 OHM load ) CIRCUITOS PROTECCION / PROTECTION CIRCUITS TENSION ALIMENTACION / OPERATION VOLTAGE Input Limiter, Short-circuit, DC of Output, under&over voltage, Temperature Universal Mains, Automatic selection VAC 50/60Hz PESO / WEIGHT (Kg.) DIMENSIONES / DIMENSIONS 2 Rack Units High MODULO DE POTENCIA / POWER MODULE ( Single Input DSP ) MODELO / MODEL NUMBER MX-1600D (1600W Continous ) MX-5000D (4800W Continous ) AMPLIFICACIÓN / AMPLIFICATION 800W + 800W + DSP 2500W W + DSP MODULO P. / MODULE P. 3rd generation Class D module, full bandwith PWM modulator with ultra low distortion VOLTAJE SALIDA / OUTPUT VOLTAGE LF: 160Vp / MF: 80Vp / HF: 80Vp loaded S/N Ratio Better than 120dB ( A-weighted, 20Hz 20KHz, 8 OHM load ) CIRCUITOS PROTECCION / PROTECTION CIRCUITS TENSION ALIMENTACION / OPERATION VOLTAGE Input Limiter, Short-circuit, DC of Output, under&over voltage, Temperature Universal Mains, Automatic selection VAC 50/60Hz PESO / WEIGHT (Kg.) DIMENSIONES / DIMENSIONS 2 Rack Units HIgh

14 ACCESORIOS / ACCESSORIES PARA BAFLES / SPEAKER CABINET Ref Soporte de pared para bafle alta resistencia High Strength Speaker Cabinet Wall-Bracket Ref Torre de Columna / Speaker Stand Máxima Carga : 60Kg. Max. Load : 60Kg. Ref Soporte de pared para bafles hasta 10 Speaker Cabinet Wall-Bracket up to 10 Ref Adaptador Ref.5614 angulo 15º Ref º adapter. Ref Soporte pared 3 posiciones 3 Position Wall-Bracket Ref Adaptador Ref.5614 para 2 satélites Ref.5614 adapter 2 satellites Ref Juego de Cáncamos para volar balfes Speaker Cabinet Flying Kit (Eyebolt) Ref Soporte Subwoofer-Satelite 35mm. sub-sat Bar Ref Foam Cover KS-15, FR-15 and DN-15 Ref Foam Cover KS-12, FR-12 and DN-12 Ref Foam Cover FR-10 and DN-10 Ref Foam Cover SUB-218 Ref Foam Cover KS-8, FR-8 and DN-8

15