Fibra óptica Adaptors and Modules

Transcripción

1 Fibra óptica Adaptors and Modules

2 Tabla de contenidos Acerca de Nexans 3 Adaptors and Modules 4 LANmark-OF ENSPACE LC Adaptor Modules 5 Adaptadores Snap-in LANmark-OF 6 LANmark-OF Plug&Play MTP Adaptor Plates 7 LANmark-OF ENSPACE MTP Adaptor Modules 8 LANmark-OF ENSPACE MTP-LC Modules 10 LANmark-OF Plug&Play Adapter Plates 12 LANmark-OF Plug&Play Module 13 LANmark-OF Plug@Play Module-Generation 1 module 15 2/05/ Página 2 / 17

3 Acerca de Nexans Nexans aporta energía a la vida a través de una extensa gama de cables y soluciones de cableado que permiten mejorar el rendimiento de sus clientes en todo el mundo. Los equipos de Nexans actúan como socios al servicio de sus clientes en cuatro sectores clave: transmisión y distribución de energía (submarina y terrestre), recursos energéticos (petróleo y gas, minería y energías renovables), transporte (carretera, ferroviario, aéreo, marítimo) y construcción (comercial, residencial y centros de datos). La estrategia de Nexans se basa en la innovación continua de los productos, soluciones y servicios, la implicación de los equipos, la asistencia técnica de los clientes y la adopción de procesos industriales seguros y respetuosos con el medioambiente. En 2013 Nexans se convirtió en el primer actor de la industria del cable en crear una Fundación destinada a sostener iniciativas para el acceso a la energía de los grupos de población más desfavorecida de todo el mundo. Con presencia industrial en 40 países y actividades comerciales por todo el mundo, Nexans emplea a cerca de personas. En 2014, el Grupo Nexans generó unas ventas de 6,4 mil millones de euros. Nexans cotiza en la bolsa NYSE Euronext de París, compartimento A. Más información en: 2/05/ Página 3 / 17

4 Adaptors and Modules 2/05/ Página 4 / 17

5 LANmark-OF ENSPACE LC Adaptor Modules ENSPACE module with 12 LC adaptors in the front Module can be easily mounted into Nexans' ENSPACE patch panel Ultra High Density: 12 modules fit into 1U 144 LC into 1U Modules can be installed from front and rear of panel Integrated inner metal shutters Descripción The ENSPACE system consists of 3 sub-components: the patch panels, the modules and the Pre-Terms. Up to 12 ENSPACE adaptor modules can be installed quickly into the ENSPACE 1U patch panel. With these 12 modules a high density of 144 LC within 1U can be achieved. The modules can be installed in the trays from the rear and from the front of the panel increasing the flexibility of installation. The 3 quad LC multimode adaptors have high quality zirconia sleeves. Metallic internal shutters are integrated into the adaptors. Fibre labeling is printed on the cover of the ENSPACE modules. Estándares Internacional ISO/IEC The ENSPACE Pre-Terms enter the module at the rear with a 2,8mm tube containing 12 fibres. This tube is fixed inside the module for strain relief. Inside the module this tube is split into 12x 900um buffered fibres. With the fibre management inside the modules the 12 fibres can be easily installed and connected to LC adaptors in the front. Inside the module a strip with colour coding is installed just after the adaptors. When matching the colours on this strip with the corresponding coloured boot of the LC connector of the ENSPACE Pre-Term the required fibre pair flip inside the channel is obtained. Splice holders for 12 splice protectors with heat shrink or Aluminum are included as accessories. Lista de Productos Ref. Nexans NSPACE.PLC12AS NSPACE.PLC12BS NSPACE.PLC12GS Nombre LANmark-OF ENSPACE Adaptor Module 12 LC Multimode Aqua Shutters Integrated LANmark-OF ENSPACE Adaptor Module 12 LC Blue Shutters Integrated LANmark-OF ENSPACE Adaptor Module 12 LC/APC Singlemode Green Shutters Integrated = Realizar pedido, = Reservar stock 2/05/ Página 5 / 17

6 Adaptadores Snap-in LANmark-OF Descripción Application LANmark-OF snap-in adapters have been designed for snapping into the modular OF patch panels and ZD boxes. They are available in single SC, dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector types offer double density, as two fiber connections are offered on the SC-type footprint. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices. Performance LC and SC versions are available in Multimode and Singlemode, MT-RJ is only available in Multimode. Estándares Internacional ISO/IEC Lista de Productos =Realizar pedido, =Reservar stock Ref. Nexans Nombre Tipo de conector Color N LANmark-OF Duplex LC Snap-In Adaptor Multimode Aqua LC Aqua N LANmark-OF Duplex LC Snap-In Adaptor Singlemode LC Blue N LANmark-OF Duplex LC Snap-In Adaptor Singlemode APC LC/APC Green N LANmark-OF Duplex SC Snap-In Adaptor Multimode Aqua SC Aqua N LANmark-OF Duplex SC Snap-In Adaptor Singlemode SC Blue N LANmark-OF Duplex SC Snap-In Adaptor Singlemode APC SC/APC Green N LANmark-OF SC Snap-In Adaptor Multimode Aqua SC Aqua N LANmark-OF SC Snap-In Adaptor Singlemode SC Blue N LANmark-OF SC Snap-In Adaptor Singlemode APC SC/APC Green = Realizar pedido, = Reservar stock 2/05/ Página 6 / 17

7 LANmark-OF Plug&Play MTP Adaptor Plates MTP Adaptor Plate for in Plug&Play Optical Patch Panel Descripción The Nexans' Plug and Play patch panel can hold up to 4 MTP* adaptor plates. The adaptor plate contains 6 MTP adaptors. For multimode key up/key down and key up/ key up versions are available. For singlemode only key up / key down adaptors. The adaptors connect a male and female MTP connector. * MTP is a trade name of US Conec Estándares Internacional ISO/IEC /05/ Página 7 / 17

8 LANmark-OF ENSPACE MTP Adaptor Modules ENSPACE module with MTP adaptors in the front Module can be easily mounted into Nexans' ENSPACE patch panel Ultra High Density: 12 modules fit into 1U 72 MTP into 1U Modules can be installed from front and rear of panel Descripción The ENSPACE system consists of 3 sub-components: the patch panels, the modules and the Pre-Terms. Up to 12 ENSPACE adaptor modules can be installed quickly into the ENSPACE 1U patch panel. With these 12 modules a high density of 72 MTP within 1U can be achieved. The modules can be installed in the trays from the rear and from the front of the panel increasing the flexibility of installation. The modules have up to 3 duplex MTP adaptors. The key up/key down adaptors are Aqua for multimode and Green for singlemode. Modules with key up/key up adaptors have Gray adaptors. Estándares Internacional ISO/IEC Port labeling is printed on the cover of the ENSPACE modules. The fan-out legs of the MTP-MTP Pre-Term enter the modules from the rear and are fixed inside the module for strain relief. * MTP is a trade mark of US Conec Lista de Productos =Realizar pedido, =Reservar stock Ref. Nexans Nombre Número de puertos LANmark-OF ENSPACE Adaptor Module 4x MTP Multimode NSPACE.PMTP4A Key Up Key Down Aqua 4 LANmark-OF ENSPACE Adaptor Module 6x MTP Singlemode NSPACE.PMTP6G Key Up Key Down Green 6 LANmark-OF ENSPACE Adaptor Module 6x MTP Multimode NSPACE.PMTP6U Key Up Key Up Grey 6 LANmark-OF ENSPACE Adaptor Module 2x MTP Multimode NSPACE.PMTP2A Key Up Key Down Aqua 2 LANmark-OF ENSPACE Adaptor Module 6x MTP Multimode NSPACE.PMTP6A Key Up Key Down Aqua 6 LANmark-OF ENSPACE Adaptor Module 4x MTP Multimode NSPACE.PMTP4U Key Up Key Up Grey 4 LANmark-OF ENSPACE Adaptor Module 2x MTP Multimode NSPACE.PMTP2U Key Up Key Up Grey 2 Fiber optic type MultiMode 50/125 SingleMode 9/125 MultiMode 50/125 MultiMode 50/125 MultiMode 50/125 MultiMode 50/125 MultiMode 50/125 = Realizar pedido, = Reservar stock 2/05/ Página 8 / 17

9 LANmark-OF ENSPACE MTP Adaptor Modules Ref. Nexans Nombre Número de puertos LANmark-OF ENSPACE Adaptor Module 4x MTP Singlemode NSPACE.PMTP4G Key Up Key Down Green 4 LANmark-OF ENSPACE Adaptor Module 2x MTP Singlemode NSPACE.PMTP2G Key Up Key Down Green 2 Fiber optic type SingleMode 9/125 SingleMode 9/125 = Realizar pedido, = Reservar stock 2/05/ Página 9 / 17

10 LANmark-OF ENSPACE MTP-LC Modules ENSPACE module with 12 LC adaptors in the front and 1 MTP adaptor in the rear Low loss performance for singlemode and multimode for MTP-12LC fibre assembly inside module Module can be easily mounted into Nexans' ENSPACE patch panel Ultra High Density: 12 modules fit into 1U 144LC into 1U Modules can be installed from front and rear of panel ENSPACE modules are pre-installed and 100 % factory tested Descripción The ENSPACE system consists of 3 sub-components: the patch panels, the modules and the Pre-Terms. The ENSPACE MTP-modules have 3 quad LC adaptors in the front and one MTP adaptor in the back. Inside a fibre assembly connects the LC- and MTP-adaptors. Up to 12 ENSPACE MTP-modules can be installed quickly into the ENSPACE 1U patch panel. With these 12 modules a high density of 144 LC within 1U can be achieved. The modules can be installed in the trays from the rear and from the front of the ENSPACE panel increasing the flexibility of installation. Fibre labeling is printed on the cover of the ENSPACE modules. The sleeve of the LC adaptor is made of high quality zirconia. Metallic shutters are integrated into the LC adaptors. Estándares Internacional ISO/IEC The modules are available with a straight or with a crossed wiring. For polarity methods A,B and C of standard TIA-568-C following modules and trunks need to be used: For a polarity method A implementation with a method A Pre-Term straight modules are used on both sides of the link. For a polarity method B implementation with a method B Pre-Term a straight cassette is used on one side of the link and a crossed module on the other side of the link. For a polarity method C implementation with a method C Pre-Term straight modules are used on both sides of the link. The ENSPACE module has standard un-pinned (female) connectors. This matches perfectly with the pinned (male) connectors of the male MTP-connector of the ENSPACE MTP Pre-Term. The insertion loss for the multimode ENSPACE module is 0,5 db measured according to standard IEC with 0,25 db being a typical value. The minimum return loss for a multimode MTP connection is 20 db measured according to IEC The multimode modules are available with OM4 fibres for multimode and are backwards compatible with OM3 fibres. The insertion loss for the singlemode ENSPACE module is 0,5 db measured 2/05/ Página 10 / 17

11 according to standard IEC with 0,25 db being a typical value. The minimum return loss for a singlemode MTP connection is 45 db measured according to IEC LANmark-OF ENSPACE MTP-LC Modules Since all connectivity is factory terminated and tested installation times are short facilitating a quick deployment. * MTP is a trade name of US Conec Lista de Productos Ref. Nexans Nombre Wiring type LANmark-OF ENSPACE MTP-Module Straight 12 LC Multimode NSPACE.MSLC12AS Aqua Shutters Integrated Straight LANmark-OF ENSPACE MTP-Module Crossed 12 LC Multimode NSPACE.MCLC12AS Aqua Shutters Integrated Crossed LANmark-OF ENSPACE MTP-Module Straight 12 LC Blue NSPACE.MSLC12BS Shutters Integrated Straight LANmark-OF ENSPACE MTP-Module Crossed 12 LC Blue NSPACE.MCLC12BS Shutters Integrated Crossed Fiber optic type MultiMode 50/125 MultiMode 50/125 SingleMode 9/125 SingleMode 9/125 = Realizar pedido, = Reservar stock 2/05/ Página 11 / 17

12 LANmark-OF Plug&Play Adapter Plates Adapter plates for 3DSC, 6DSC, 6DLC or 12DLC Available in multimode and singlemode Module can be easily mounted into Nexans' Plug&Play patch panel High density: 4 modules fit into 1U Descripción Application The adaptor plates are designed for a fast installation inside the Nexans Plug&Play panels. They allow a wide range of connectivity options. A mix of different adaptor types and a combination of singlemode and multimode within the same panel is possible. Compatibility The adapter plates are installed in the LANmark-OF Plug&Play Patch panels (N439.3MPP). Up to 4 adapters plates can be installed into one patch panel. Adapter plate versions. The adapter plates are available with a density of 3DSC, 6DSC, 6DLC or 12DLC. This results in a medium density of 48SC/48LC or a high density of 96 LC in one patch panel. The adapter plates are available for multimode and singlemode. Blank adapter plates reserve fibre space for future use. Estándares Internacional ISO/IEC Ref. Nexans Nombre Tipo de conector Fiber optic type N205.ALC12MMA LANmark-OF Adaptor Plate 12 LC Multimode Aqua LC Multimode N205.ALC24MMA LANmark-OF Adaptor Plate 24 LC Multimode Aqua LC Multimode N205.ALC12SMB LANmark-OF Adaptor Plate 12 LC Singlemode Blue LC SingleMode 9/125 N205.ALC24SMB LANmark-OF Adaptor Plate 24 LC Singlemode Blue LC SingleMode 9/125 N205.ALC12SAG LANmark-OF Adaptor Plate 12 LC Singlemode APC Green LC/APC SingleMode 9/125 N205.ALC24SAG LANmark-OF Adaptor Plate 24 LC Singlemode APC Green LC/APC SingleMode 9/125 N205.ASC06MMA LANmark-OF Adaptor Plate 6 SC Multimode Aqua SC Multimode N205.ASC12MMA LANmark-OF Adaptor Plate 12 SC Multimode Aqua SC Multimode N205.ASC06SMB LANmark-OF Adaptor Plate 6 SC Singlemode Blue SC SingleMode 9/125 N205.ASC12SMB LANmark-OF Adaptor Plate 12 SC Singlemode Blue SC SingleMode 9/125 N205.ASC06SAG LANmark-OF Adaptor Plate 6 SC Singlemode APC Green SC/APC SingleMode 9/125 N205.ASC12SAG LANmark-OF Adaptor Plate 12 SC Singlemode APC Green SC/APC SingleMode 9/125 N205.AST06MMM LANmark-OF Adaptor Plate 6 ST Multimode ST Multimode 2/05/ Página 12 / 17

13 LANmark-OF Plug&Play Module Play&Play module with 12 LC or 24 LC connections Available in LANmark-OF OM4 multimode and LANmark-OF OS2 singlemode Module can be easily mounted into Nexans' Plug&Play patch panel High density: 4 modules fit into 1U Plug&Play modules are pre-installed and 100 % factory tested Descripción The Plug&Play system consists of 3 subcomponents: the Plug&Play modules, the MTP-MTP* Pre-Terms and the Plug&Play patch panel. The central component is the pre-installed Plug&Play module. The MTP connector at the back of the module connects at once 12 fibres to the MTP-MTP Pre-Term. Inside the module the fibres are spread out towards the LC adaptors at the front. Plug&Play Module Characteristics Up to 4 Plug&Play modules can be installed quickly into the Plug&Play patch panel with push rivets. With these 4 modules a medium density of 48 LC or a high density of 96 LC connections within 1U can be achieved. The insertion loss for the multimode LANmark-OF Plug&Play low loss module is 0,6 db measured according to standard IEC The minimum return loss for a multimode MTP connection is 20 db measured according to IEC The insertion loss for the singelmode LANmark-OF Plug&Play module is 0,9 db measured according to standard IEC The minimum return loss for a singlemode MTP connection is 45 db measured according to IEC The modules are available with OM4 fibres for multimode and are backwards compatible with OM3 fibres. The LC multimode adaptors are aqua. The singlemode module has G652D fibres for OS2 compatibility. The LC singlemode adaptors are blue. The wiring inside the module is straight. This allows to maintain polarity in the MPO-link together with the pair-wise fibre flip inside the MPO-MPO Pre-Term according to method C from standard TIA 568-B Estándares Internacional ISO/IEC Since all connectivity is factory installed and factory tested installation times are short for a quick deployment or for frequent changes. The Plug&Play module has standard pinned (male) connectors. This matches perfectly with the non-pinned (female) connectors of the MTP-MTP Pre-Term. * MTP is a trade name of US Conec 2/05/ Página 13 / 17

14 LANmark-OF Plug&Play Module Lista de Productos Ref. Nexans N441.4L24LC4 N441.4L12LC4 N441.4M12LC0 N441.4M24LC0 Nombre LANmark-OF Plug&Play Low Loss Module 24 LC OM4 Aqua LANmark-OF Plug&Play Low Loss Module 12 LC OM4 Aqua LANmark-OF Plug&Play Module 12 LC Singlemode LANmark-OF Plug&Play Module 24 LC Singlemode = Realizar pedido, = Reservar stock Optical performance Plug&Play module Characteristic low loss multimode (OM3 or OM4) SM (OS2 with G652D) Maximum insertion loss 0,60 db 0,90 db Typical insertion loss 0,30 db 0,40 db IEC standard insertion loss IEC IEC Minimum return loss 20 db 45 db IEC standard return loss IEC IEC /05/ Página 14 / 17

15 LANmark-OF Module-Generation 1 module Play&Play module with 12SC, 12 LC or 24 LC connections Available with LANmark-OF Plug&Play connectivity and low loss connectivity grade Available in LANmark-OF OM4 multimode and LANmark-OF OS2 singlemode Module can be easily mounted into Nexans' Plug&Play patch panel High density: 4 modules fit into 1U Plug@Play modules are pre-installed and 100 % factory tested Descripción The Plug&Play system consists of 3 subcomponents: the Plug&Play modules, the MTP-MTP* Pre-Terms and the Plug&Play patch panel. The central component is the pre-installed Plug&Play module. The MTP connector at the back of the module connects at once 12 fibres of the MTP-MTP Pre-Term. Inside the module the fibres are spread out towards the SC/LC adaptors at the front. Plug&Play Module Characteristics Up to 4 Plug&Play modules can be installed quickly into the Plug&Play patch panel with push rivets. With these 4 modules a medium density of 48 SC or 48 LC connections within 1U can be achieved. With the 24 LC high density module a maximum of 96 LC connections within 1U is also possible. The insertion loss for the LANmark-OF Plug&Play module is 0,9 db measured according to standard IEC Estándares Internacional ISO/IEC The insertion loss for the LANmark-OF Plug&Play low loss module is 0,6 db measured according to standard IEC The modules are available with OM4 fibres for multimode and are backwards compatible with OM3 fibres. The singlemode module has G652D fibres for OS2 compatibility. The wiring inside the module is straight. This allows to maintain polarity in the MPO-link together with the pair-wise fibre flip inside the MPO-MPO Pre-Term according to method C from standard TIA 568-B Since all connectivity is factory installed and factory tested installation times are short for a quick deployment or for frequent changes. The Plug&Play module has standard pinned (male) connectors. This matches perfectly with the non-pinned (female) connectors of the MTP-MTP Pre-Term. * MTP is a trade name of US Conec 2/05/ Página 15 / 17

16 N-numbers for Plug&Play Modules Contacto LANmark-OF Module-Generation 1 module MPO Module MPO Low Loss Module OM3/OM4 SM OS2 OM3/OM4 SM OS2 N441.2M24LC4 LANmark-OF Plug&Play Module 24 LC OM4 N441.2M12LC4 LANmark-OF Plug&Play Module 12 LC OM4 N441.2M12SC4 LANmark-OF Plug&Play Module 12 SC OM4 N441.2M24LC0 LANmark-OF Plug&Play Module 24 LC Singlemode N441.2M12LC0 LANmark-OF Plug&Play Module 12 LC Singlemode N441.2M12SC0 LANmark-OF Plug&Play Module 12 SC Singlemode N441.2L24LC4 LANmark-OF Plug&Play Low Loss Module 24 LC OM4 N441.2L12LC4 LANmark-OF Plug&Play Low Loss Module 12 LC OM4 N441.2L12SC4 LANmark-OF Plug&Play Low Loss Module 12 SC OM4 N441.2L24LC0 LANmark-OF Plug&Play Low Loss Module 24 LC Singlemode N441.2L12LC0 LANmark-OF Plug&Play Low Loss Module 12 LC Singlemode N441.2L12SC0 LANmark-OF Plug&Play Low Loss Module 12 SC Singlemode 2/05/ Página 16 / 17

17 Experto global en cables y sistemas de cableado Distribuído por : Nexans Iberia, S.L. - Ctra. de Sentmenat, Km 2,6 - E Polinyà (Barcelona) - España