(1) AV Center. AV Center. Operating Instructions. Manual de instrucciones. Istruzioni per l uso XAV-64BT XAV Sony Corporation

Transcripción

1 (1) AV Center AV Center Operating Instructions Manual de instrucciones Istruzioni per l uso GB ES IT XAV-64BT XAV Sony Corporation

2 2 Be sure to install this unit in the dashboard of the car for safety. For installation and connections, refer to the supplied Installation/Connections guide. About this manual This manual contains instructions for XAV- 64BT and XAV-63. XAV-64BT is the model representatively used for illustration purposes. Bluetooth functions and descriptions apply only to XAV-64BT. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This label is located on the bottom of the chassis. Made in Thailand Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. The manufacturer of this product is Sony Corporation, Konan Minato-ku Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than % mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-oflife to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

3 Note on the lithium battery Do not expose the battery to excessive heat such as direct sunlight, fire or the like. The following applies only to XAV-64BT: The nameplate indicating operating voltage, etc., is located on the bottom of the chassis. Warning if your car s ignition has no ACC position Be sure to set the Auto Off function (page 46). The unit will turn off automatically in the set time when no source is selected, which prevents battery drainage. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off. To cancel the demonstration (Demo) display, see page 50. Hereby, Sony Corp., declares that this XAV- 64BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: Italy: Use of the RLAN network is governed: with respect to private use, by the Legislative Decree of , no. 259 ( Code of Electronic Communications ). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted; with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree , as amended, and Art. 25 (general authorization for electronic communications networks and services) of the Code of electronic communications. Norway: Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard. 3

4 Table of Contents Notes on safety Notes on installation Copyrights Notes on Bluetooth function (XAV-64BT only) Playable discs and symbols used in these Operating Instructions Location and function of controls/terminals Main unit RM-X170 Remote Commander Getting Started Resetting the unit Performing initial settings Setting the clock Preparing the remote commander Radio Listening to the radio Reception controls Reception indications Storing and receiving stations Storing automatically BTM Storing manually Receiving stored stations RDS Overview Setting AF and TA Selecting PTY Setting CT Discs Playing discs Playback controls Playback indications Using PBC (playback control) functions Configuring audio settings Changing the audio language/format Changing the audio channel Adjusting the audio output level Dolby D level Repeat and shuffle play Direct search play USB Device Operations Playing from a USB device Repeat and shuffle play Enjoying music according to your mood SensMe Before using the SensMe function Installing SensMe Setup and Content Transfer on your computer Registering a USB device using SensMe Setup Transferring tracks to the USB device using Content Transfer Playing tracks in channels SensMe channels Playing tracks in mood maps SensMe mood Searching for a track by listening to track passages ZAPPIN ipod Operations Playing an ipod Setting the play mode Repeat and shuffle play Operating an ipod directly Passenger App Control

5 Useful Functions Listing up tracks/images/video files List Selecting a track/image/video file Selecting a file type Using Gesture Command Handsfree Calling and Audio Streaming Bluetooth function (XAV-64BT only) Before using the Bluetooth function Basic procedure of the Bluetooth function Bluetooth status indications Installing the microphone Pairing Connecting Handsfree calling Making calls Receiving calls Operations during a call Call data management Preset dial Audio streaming Listening to a Bluetooth device via this unit Operating a Bluetooth device with this unit Bluetooth settings Sound Adjustment Selecting the sound quality EQ Customizing the equalizer curve EQ7 Tune Adjusting the sound characteristics Optimizing sound for the listening position Intelligent Time Alignment Calibrating the listening position Intelligent Time Alignment Tune Speaker configuration and volume setup Creating a virtual center speaker CSO Using rear speakers like subwoofers Rear Bass Enhancer Adjusting the speaker volume Monitor Adjustment Touch panel calibration Setting the background screen Adjusting the picture Picture EQ Customizing the picture Selecting the aspect ratio

6 Settings Basic setting operation General settings Sound settings Screen settings DVD and other playback settings Using Optional Equipment Auxiliary audio/video equipment Rear view camera Rear view camera settings Additional Information Precautions Notes on LCD panel Notes on discs Playback order of MP3/WMA/AAC/JPEG/ Xvid/MPEG-4 files About MP3 files About WMA files About AAC files About JPEG files About MPEG-4 files About ipod About Bluetooth function Maintenance Removing the unit Specifications Troubleshooting Error displays/messages Language code/area code list

7 Notes on safety Comply with your local traffic rules, laws and regulations. While driving Do not watch or operate the unit, as it may lead to distraction and cause an accident. Park your car in a safe place to watch or operate the unit. Do not use the setup feature or any other function which could divert your attention from the road. When backing up your car, be sure to look back and watch the surroundings carefully for your safety, even if the rear view camera is connected. Do not depend on the rear view camera exclusively. While operating Do not insert your hands, fingers or foreign object into the unit, as it may cause injury or damage to the unit. Keep small articles out of the reach of children. Be sure to fasten seatbelts to avoid injury in the event of a sudden movement of the car. Preventing an accident Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, the picture is automatically switched to the background screen after displaying the caution below. Video blocked for your safety. The monitor connected to the REAR VIDEO OUT is active while the car is in motion. The picture on the display is switched to the background screen, but audio source can be heard. Do not operate the unit or watch the monitor while driving. Notes on installation We recommend this unit should be installed by a qualified technician or service personnel. If you try to install this unit by yourself, refer to the supplied Installation/Connections guide and install the unit properly. Improper installation may cause battery drain or a short circuit. If the unit does not work properly, check the connections first, referring to the supplied Installation/Connections guide. If everything is in order, check the fuse. Protect the unit surface from damage. Do not expose the unit surface to chemicals, such as insecticide, hair spray, insect repellent, etc. Do not leave rubber or plastic materials in contact with the unit for a long time. Otherwise, the finish of the unit may be impaired, or deformation may occur. When installing, be sure to fix securely. When installing, be sure to turn the ignition off. Installing the unit with the ignition on may cause battery drain or a short circuit. When installing, be sure not to damage any car parts such as pipes, tubes, fuel tank or wiring by using a drill, as it may cause a fire or an accident. 7

8 Copyrights Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Microsoft, Windows, Windows Vista and Windows Media and logos are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. DVD VIDEO, DVD-R, DVD-RW, DVD+R, and DVD+RW are trademarks. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. ZAPPIN is a trademark of Sony Corporation. 12 TONE ANALYSIS and its logo are trademarks of Sony Corporation. WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. SensMe and the SensMe logo are trademarks or registered trademarks of Sony Ericsson Mobile Communications AB. Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit CD, DVD, Blu-ray Disc, and music and videorelated data from Gracenote, Inc., copyright 2000 to present Gracenote. Gracenote Software, copyright 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. This product uses font data which is licensed to Sony by Monotype Imaging Inc. or its affiliates. iphone, ipod, ipod classic, ipod nano, and ipod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple, Macintosh and itunes are trademarks of Apple Inc., registered in the U.S. and other countries. THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER FOR DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE All other trademarks are trademarks of their respective owners. 8

9 Notes on Bluetooth function (XAV-64BT only) Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. Emergency calls This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. IMPORTANT NOTICE! Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the user s authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product. Driving Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Connecting to other devices When connecting to any other device, please read its user guide for detailed safety instructions. Radio frequency exposure RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly. 9

10 Playable discs and symbols used in these Operating Instructions This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. Disc symbol in manual Disc format DVD VIDEO VIDEO AUDIO DVD-R* 1 /DVD-R DL* 1 /DVD-RW* 1 (Video mode/vr mode) DVD+R* 1 /DVD+R DL* 1 /DVD+RW* 1 Video CD (Ver. 1.0/1.1/2.0) Audio CD CD-ROM* 2 /CD-R* 2 /CD-RW* 2 *1 Audio files can also be stored. *2 Video/image files can also be stored. Note DVD may be used in these Operating Instructions as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/DVD+RWs. The following chart shows the supported file types and their symbols. Available functions differ depending on the format, regardless of disc type. The format symbols below appear in these Operating Instructions next to the description of functions available for their corresponding file types. Format symbol in manual MPEG-4 File type MP3 audio file WMA audio file AAC audio file JPEG image file Xvid video file MPEG-4 video file Tip For details on compression formats, see page 56. Note Even compatible discs may not be playable on this unit, depending on their recording condition. 10

11 Location and function of controls/terminals Main unit For details, see the pages listed below. A Z (Eject) button page 19 B Reset button page 15 C Receptor for the remote commander D Disc slot page 19 E TOP button For XAV-64BT Press to open the top menu. For XAV-63 Press to open the source list. F Front AUX terminal page 53 G USB terminal Remove the cap to connect a USB device. H Volume control dial I SOURCE/OFF button Press to turn on the power/change the source: Tuner (Radio), Disc, ipod/usb, AUX (Auxiliary equipment), BT Audio (Bluetooth Audio)*. Press and hold for 1 second to exit the source. Press and hold for more than 2 seconds to turn off. J Display/touch panel * Available on XAV-64BT only. 11

12 Screen displays When no source is selected: 1 2 Source List Top A Source List key Touch to open the source list. B Top key XAV-64BT Touch to open the top menu. XAV-63 Touch to open the source list. C Clock page 15, 50 D (Close) key Touch to close the menu. Top menu (XAV-64BT only): ATT M.OFF E ATT (Attenuate) key* 1 Touch to attenuate the sound. To cancel, touch again. F (Setting) key Touch to open the setting menu. G M.OFF (Monitor off) key Touch to turn off the monitor and the button illumination. To turn back on, touch anywhere on the display. H AV Source key* 2 Touch to open the source list. I BT Phone key* 2 Touch to enter Bluetooth Phone mode. Source list: qa ATT Top J Source select keys Touch to change the source: Tuner (Radio), Disc, AUX (Auxiliary equipment), ipod/usb, SensMe, BT Audio (Bluetooth Audio)* 2. K Top key/ M.OFF key This key varies based on the model. XAV-64BT: Top key XAV-63: M.OFF key See above for the function of each key. *1 Appears only when a source is selected. *2 Available on XAV-64BT only. *3 BT Audio appears on XAV-64BT only * 3

13 RM-X170 Remote Commander q; qa qs qd 6 qf qg 7 qh The remote commander can be used to operate the audio controls. For menu operations, use the touch panel. For details, see the pages listed below. Remove the insulation film before use (page 15). A OFF button Press to exit the source/stop the source. Press and hold to turn off. B MONITOR OFF button Press to turn off the monitor and the button illumination. To turn back on, press again. C POSITION button Press to switch the listening position ( Front L / Front R / Front / All / Custom / OFF ). D O (Return) button Press to return to the previous display/return to the menu on a VCD* 1. E EQ (Equalizer) button Press to select an equalizer curve from 7 music types ( Xplod / Vocal / Edge / Cruise / Space / Gravity / Custom / OFF ). F Number buttons page 24 Radio: Press to receive stored stations. Press and hold to store stations. Disc/USB: Press to locate a title/chapter/track. G CLEAR button Press to delete an entered number. H ATT (Attenuate) button Press to attenuate the sound. To cancel, press again. I u (Play/Pause) button 13

14 J.m/M> buttons Radio: Press to tune to stations automatically. Press and hold to find a station manually. Disc* 2 /USB: Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/ fast-forward video. Press and hold to reverse/fast-forward a track. Bluetooth Audio* 3 * 4 : Press to skip a track. Press and hold to reverse/fast-forward a track. *1 When playing with PBC functions. *2 Operation differs depending on the disc (page 20). *3 Operation differs depending on the connected Bluetooth device. *4 Applies to XAV-64BT only. *5 Available on XAV-64BT only. *6 When two auxiliary devices are used. Note The remote commander will not operate when the unit is turned off and the display has disappeared. Press (SOURCE/OFF) on the main unit, or insert a disc to activate the unit and enable operation via the remote commander. K DVD playback setting buttons (AUDIO): Press to change the audio language/format. (For a VCD/CD/MP3/WMA/AAC/MPEG- 4, to change the audio channel.) (SUBTITLE): Press to change the subtitle language. (ANGLE): Press to change the viewing angle. (TOP MENU): Press to open the top menu on a DVD. (MENU): Press to open the menu on a disc. L ZAP button Press to enter ZAPPIN mode. M </M/m/, (Cursor)/ENTER buttons page 19 Press to control the menu on a DVD. N SRC (Source) button Press to turn on/change the source: Tuner (Radio), Disc, ipod/usb, AUX (Auxiliary equipment), BT Audio (Bluetooth Audio)* 5. O MODE button Press to select the radio band (FM/MW/LW)/ select an auxiliary device (Front AUX/Rear AUX)* 6. P VOL (Volume) +/ buttons 14

15 Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button (page 11) with a pointed object, such as a ballpoint pen. Note Pressing the reset button will erase the clock setting and some stored contents. Performing initial settings After resetting, the display for the initial settings appears. Initial Setting Setting the clock The clock uses a 24-hour indication. 1 Touch Source List, then. The general setting menu appears. If not, touch General. 2 Touch Clock Adjust. The setting display appears. 3 Set the hour and minute. For example, to set to 8:30, touch Touch OK. The setting is complete. To delete an entered number, touch Clear. To return to the previous display, touch Back. Preparing the remote commander Rear/Sub Out Listening Position Language Rear / Sub Front L / Front R English Before using the remote commander for the first time, remove the insulation film. OK 1 Touch Rear/Sub Out to set the subwoofer connection status. If a subwoofer is connected, select Sub. If a power amplifier is connected, select Rear. If neither a subwoofer or power amplifier is connected, you can select either Sub or Rear. 2 Touch Listening Position to set the listening position. Set to Front L if your listening position is front left, or Front R if front right. 3 Touch Language to set the display language. Touch repeatedly until the desired language (English/Spanish/Russian) appears. 4 Touch OK. The setting is complete. This setting can then be further configured in the setting menu. For details on setting the subwoofer connection status, see page 49. For details on setting the listening position, see Optimizing sound for the listening position Intelligent Time Alignment on page 41. For details on setting the display language, see page

16 Radio Listening to the radio 1 Touch Source List, then Tuner. (For XAV-64BT only: From the top menu, touch AV Source, then Tuner. ) The radio reception display appears, and the preset list is displayed automatically. Reception controls Touch the display if the reception controls are not displayed. 1 Source List ATT TA AF Top Source List ATT TA AF Top P1 P2 P3 BTM Band Receive Menu Preset List PTY List P4 P5 P6 Band 2 Touch Band. The band list appears. Source List ATT Receive Menu Preset List Memory PTY List TA AF Top qa 1 Source List Touch to open the source list. (page 12) 2 ATT Touch to attenuate the sound. To cancel, touch again. 3 TA Touch to set TA in RDS. (page 18) FM1 FM2 FM3 MW LW 4 AF Touch to set AF in RDS. (page 18) Band Receive Menu Preset List 3 Touch the desired band ( FM1, FM2, FM3, MW, or LW ). Touch Band again to close the band list. 4 Perform tuning. To tune automatically Touch./>. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. To tune manually Touch m/m repeatedly until the desired frequency is received. To skip frequencies continuously, touch and hold m/m. PTY List 5 Top XAV-64BT Touch to open the top menu. (page 12) XAV-63 Touch to open the source list. (page 12) 6 m/m Touch to tune manually. Touch and hold to continuously skip frequencies. 7./> Touch to tune automatically. 8 Band Touch to open the band list and change the band. 9 Receive Menu Touch to open the receive menu, which contains the following items. Regional (page 18) 0 Preset List Touch to list up stored stations, or store stations. (page 17) qa PTY List Touch to open the PTY list. (page 19) 16

17 Reception indications Storing and receiving stations A Source List ATT B TA AF Top Caution When tuning to stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically BTM 15 C Band Receive Menu D Preset List A Current source icon* 1 B Band name, preset number* 2, frequency* 3 / status C Volume level* 4 D EQ7 setting status *1 Appears only when the controls are displayed. *2 Appears only when a preset station is received. *3 While receiving an RDS station, the program service name appears. For details, see RDS on page 18. *4 When ATT is activated, appears. PTY List 1 Touch Source List, then Tuner. To change the band, touch Band, then select the desired band ( FM1, FM2, FM3, MW, or LW ). 2 Touch Preset List, then BTM. The unit stores the first six available stations in the preset list ( P1 to P6 ). A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you want to store, touch Preset List. 2 Touch Memory, then touch a number in the list ( P1 to P6 ). The number and the confirmation display appear. 3 Touch Yes. The station is stored. Note If you try to store another station to the same number, the previously stored station will be replaced. Tip When an RDS station is stored, the AF/TA setting is also stored (page 18). Receiving stored stations 1 Select the band, then touch Preset List. 2 Touch the desired number ( P1 to P6 ). 17

18 RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items Source List ATT A B C A Band name, preset number, frequency (program service name), RDS data, TA* 1 B RDS* 2, TP* 3 C Clock *1 During traffic information. *2 During RDS reception. *3 During traffic program reception. TA AF Top Band Receive Menu Preset List RDS services This unit automatically provides RDS services as follows: AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually. TA (Traffic Announcement)/TP (Traffic Program) Provides current traffic information/programs. Any information/program received will interrupt the currently selected source. PTY (Program Types) Displays the currently received program type. Also searches for a designated program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. PTY List Notes Depending on the country/region, not all RDS functions may be available. RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. Setting AF and TA 1 During reception/playback, touch AF or TA to activate either function. When activated, the key color changes. To deactivate, touch again. Storing RDS stations with the AF and TA setting You can preset RDS stations along with the AF/ TA setting. If you use the BTM function, only RDS stations are stored using the same AF/TA setting. If you preset manually, you can preset both RDS and non-rds stations with the AF/TA setting for each. 1 Set AF/TA, then store the station with BTM or manually. Receiving emergency announcements With AF or TA on, emergency announcements will automatically interrupt the currently selected source. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. Staying with one regional program Regional When the AF function is on, this unit s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program s reception area, deactivate the regional function during FM reception. Touch Receive Menu, then the Regional box to set to OFF. Note This function does not work in the UK and in some other areas. Local Link function (UK only) This function enables you to select other local stations in the area, even if they are not stored on numbers. 18

19 1 During FM reception, touch Preset List, then a number ( P1 to P6 ) to which a local station is stored. 2 Within 5 seconds, touch the number of the local station again. Repeat this procedure until the local station is received. Selecting PTY 1 During FM reception, touch PTY List. The PTY list appears if the station is transmitting PTY data. To scroll the list, touch v/v. 2 Touch the desired program type. The unit searches for a station broadcasting the selected program type. To close the PTY list, touch PTY List. Type of programs News (News), Current Affairs (Current Affairs), Information (Information), Sport (Sports), Education (Education), Drama (Drama), Cultures (Culture), Science (Science), Varied Speech (Varied), Pop Music (Pop Music), Rock Music (Rock Music), Easy Listening (M.O.R. Music), Light Classics M (Light classical), Serious Classics (Serious classical), Other Music (Other Music), Weather & Metr (Weather), Finance (Finance), Children s Progs (Children s program), Social Affairs (Social Affairs), Religion (Religion), Phone In (Phone In), Travel & Touring (Travel), Leisure & Hobby (Leisure), Jazz Music (Jazz Music), Country Music (Country Music), National Music (National Music), Oldies Music (Oldies Music), Folk Music (Folk Music), Documentary (Documentary) Discs Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. 1 Insert the disc (label side up). Playback starts automatically. If the DVD menu appears Touch the item in the DVD menu. You can also use the menu control panel, which can be displayed by touching outside of the DVD menu. Touch b/v/v/b to move the cursor, then touch ENTER to confirm. If the menu control panel does not appear by touching the display, use the remote commander. About the DVD menu A DVD is divided into several sections, which make up a picture or music feature. These sections are called titles. When you play a DVD that contains several titles, you can select a desired title using the DVD s top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu. If the disc contains JPEG files The slide show starts automatically. To stop playback Press and hold (SOURCE/OFF) for 1 second. Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. To eject the disc 1 Press Z on the main unit. Notes You cannot use this function in countries/regions where no PTY data is available. You may receive a different radio program from the one you select. Setting CT 1 Set CT to ON in setting (page 47). Notes The CT function may not work even though an RDS station is being received. There may be a difference between the time set by the CT function and the actual time. 19

20 Playback controls Touch the display if the playback controls are not displayed. MPEG-4 Common to all discs/formats Source List ATT TA AF Top Source List ATT TA AF Top Play Menu Album DVD Play Menu Control Source List ATT TA AF Top DVD Play Menu Control 7 Source List ATT TA AF Top PBC Panel Play Menu Source List Touch to open the source list. (page 12) 2 ATT Touch to attenuate the sound. To cancel, touch again. 3 Top XAV-64BT Touch to open the top menu. (page 12) XAV-63 Touch to open the source list. (page 12) 4./> Touch to skip a chapter/track/scene/ image/file. Touch and hold momentarily to reverse/ fast-forward the video; and then repeatedly to switch the speed ( 2 t 12 t 120 t 2 )* 1. To cancel, touch u. Touch and hold to reverse/fast-forward the audio track. During pause, touch and hold down > to play the video in slow motion. To cancel, release the key. 5 u Touch to pause/resume play after pause. 6 Play Menu Touch to open the play menu, which contains the following items. Repeat / Shuffle (page 23) Dolby D Level (DVD VIDEO playback only) (page 23) Image Turn (JPEG playback only): Touch to rotate an image left/right. Audio (page 23) 20