Fibra óptica Patch Cords

Fibra óptica Patch Cords

Tabla de contenidos Acerca de Nexans 3 Símbolos 4 Patch Cords 5 LANmark-OF G Patch Cords 6 LANmark-OF ENSPACE Patch Cord Duplex LC 8 LANmark-OF OM3 Patch Cords 10 LANmark-OF OM4 Patch Cords 12 LANmark-OF Ruggedised Patch Cords 14 LANmark-OF Singlemode Patch Cords 16 LANmark-OF Slimflex Uniboot Patch Cord Duplex LC 18 Latiguillos LANmark-OF 20 2/05/16 - http://www.nexans.es Página 2 / 22

Acerca de Nexans Nexans aporta energía a la vida a través de una extensa gama de cables y soluciones de cableado que permiten mejorar el rendimiento de sus clientes en todo el mundo. Los equipos de Nexans actúan como socios al servicio de sus clientes en cuatro sectores clave: transmisión y distribución de energía (submarina y terrestre), recursos energéticos (petróleo y gas, minería y energías renovables), transporte (carretera, ferroviario, aéreo, marítimo) y construcción (comercial, residencial y centros de datos). La estrategia de Nexans se basa en la innovación continua de los productos, soluciones y servicios, la implicación de los equipos, la asistencia técnica de los clientes y la adopción de procesos industriales seguros y respetuosos con el medioambiente. En 2013 Nexans se convirtió en el primer actor de la industria del cable en crear una Fundación destinada a sostener iniciativas para el acceso a la energía de los grupos de población más desfavorecida de todo el mundo. Con presencia industrial en países y actividades comerciales por todo el mundo, Nexans emplea a cerca de 26.000 personas. En 2014, el Grupo Nexans generó unas ventas de 6,4 mil millones de euros. Nexans cotiza en la bolsa NYSE Euronext de París, compartimento A. Más información en: www.nexans.com 2/05/16 - http://www.nexans.es Página 3 / 22

Símbolos Mechanical resistance to impacts (IEC 60794-1-E4) No propagación de la llama Radio de curvatura mínimo en operación estática No propagador del incendio Temperatura ambiente de utilización (rango) 2/05/16 - http://www.nexans.es Página 4 / 22

Patch Cords 2/05/16 - http://www.nexans.es Página 5 / 22

LANmark-OF G Patch Cords Optical fiber patch cords Parellel Optics: GBase-SR4 and 100GBase-SR10 LANmark-OF OM3 and OM4 performance For use in data centres Descripción Nexans LANmark-OF MTP-MTP patch cords have been designed for indoor applications in support of parallel optics, i.e. GBase-SR4 and 100GBase-SR 4. Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are data centres: Connections from patch panels to the active equipment Cross connects Nexans LANmark-OF MTP-MTP patchcords are straight patch cords with a key up - key up design. Depending on the channel configuaration the patch cords are available with male-male, female-female or male-male MTP* connectors. The patch cords are available with LANmark-OF OM3 and OM4 performance. Details on the fibre specifications can be found in the detailed fibre datasheets. Estándares Internacional ISO/IEC 11801 The typical value for the insertion loss for a multimode MTP connection is 0,125 db. The limit value for a multimode MTP connection is 0,3 db measured according to standard IEC 61300-3-45. The minimum return loss for a multimode MTP connection is 20 db measured according to IEC 61300-3-6. Mechanical characteristics of the Pre-Term are conform to the IEC 60794-20 standard for indoor cables. The small diameter of 3.65 mm of the cable reduces significantly the expensive space required for cabling in a data centre and facilitates the airflow. The length between the 2 MTP-connectors is variable and can be increased in steps of 1m. The "LLL" in the N-number equals LL.Lm. For instance 020 stands for 2m. * MTP is a trade name of US Conec Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m No propagación de la llama IEC 60332-1 No propagador del incendio IEC 60332-3 Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) 0.. 60 C 2/05/16 - http://www.nexans.es Página 6 / 22

LANmark-OF G Patch Cords Características Características de construcción Cubierta exterior LSZH-FR Características dimensionales Diámetro exterior nominal 3,65 mm Características mecánicas Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m Crush resistance (IEC 60794-1-E3) 50 N/cm Características de uso No propagación de la llama IEC 60332-1 No propagador del incendio IEC 60332-3 Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) 0.. 60 C Lista de Productos Ref. Nexans Nombre Fiber optic type LANmark-OF G Patch Cord Female MTP-Female N125.5SFF12AAXXX MTP Straight OM3 XX.Xm Aqua OM3 50/125 Aqua LANmark-OF G Patch Cord Female MTP-Female N125.7SFF12AAXXX MTP Straight OM4 XX.Xm Aqua OM4 50/125 Aqua LANmark-OF G Patch Cord Male MTP-Female N125.5SMF12AAXXX MTP Straight OM3 XX.Xm Aqua OM3 50/125 Aqua LANmark-OF G Patch Cord Male MTP-Female N125.7SMF12AAXXX MTP Straight OM4 XX.Xm Aqua OM4 50/125 Aqua Color Tipo de conector Female MPO - Female MPO Female MPO - Female MPO Male MPO - Female MPO Male MPO - Female MPO = Realizar pedido, = Reservar stock Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m No propagación de la llama IEC 60332-1 No propagador del incendio IEC 60332-3 Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) 0.. 60 C 2/05/16 - http://www.nexans.es Página 7 / 22

LANmark-OF ENSPACE Patch Cord Duplex LC Optical fibre ENSPACE patch cords LANmark-OF performance For use in cabinets and workplaces Bend radius reduced to 10 mm GIGAliteFLEX bend insensitive fibre Round patch cord with uniboot design Reverse polarity uniboot connector Descripción Optimised for data centres environments LANmark-OF ENSPACE patch cords have a very small bend radius of 10 mm due to the use GIGAliteFLEX bend insensitive fibre. The small bend radius of the patch cord is beneficial in high density patching areas where a lot of bends are common. There is a high risk that the larger bend radius ( mm) of traditional patch cords is not maintained resulting in high attenuation and loss of transmission. The round design of the ENSPACE patch cord results in a small bend radius in any direction. Traditional patch cords based on a zipcord design have a bend radius that is dependent on the orientation. With the round design and the small diameter (2mm) of the patch cable the area required for the patch cord is reduced by 50 % resulting in space savings, reduced disturbance of the airflow for cooling and easier patch cords management in high density racks. Estándares Internacional ISO/IEC 11801 For the support of the advanced high speed Ethernet protocols with stringent power budgets the ENSPACE patch cord features a low loss performance of 0.3 db. This increases the headroom in the channel and reduces the risk of down time. Characteristics Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.125 db GIGAliteFLEX bend insensitive fibre Guarantees and installation Nexans LANmark-OF optical fibre patch cords have been designed for indoor Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m 2/05/16 - http://www.nexans.es Página 8 / 22

LANmark-OF ENSPACE Patch Cord Duplex LC applications in support of high speed protocols. Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are: Cabinets to connect patch panels to active equipment. Cross connects in data centres. Design Nexans LANmark-OF patch cords are delivered according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This complies to the requirements of IEC 11801 and EN 50174-1:2009. The polarity of the ENSPACE patch cord can be changed by opening the uniboot connector on one side and change the position of the 2 LC connectors. A black and yellow plastic square identify the fibre inside the patch cord. The patch cords are delivered with the black square on the left on side A and on the right on side B. This is required for cross-over or optical crossed patch cords. By changing the position of the black square on side A from the left to the right the patch cord becomes an optical straight patch cord. This straight patch cord can be used for some rare legacy applications that have a non-standard polarity. Características Características de transmisión Insertion Loss, maximum, db Características mecánicas Mechanical resistance to impacts (IEC 60794-1-E4) Maximum pulling force (IEC 60794-1-2-E1) Crush resistance (IEC 60794-1-E3) 0,3 db 10 impacts of 1 N.m 100 N 100 N/cm Lista de Productos Ref. Nexans Nombre Fiber optic type N122.5UUAx LANmark-OF ENSPACE Patch Cord DLC-DLC OM3 LSZH xm Aqua OM3 50/125 N122.7UUAx LANmark-OF ENSPACE Patch Cord DLC-DLC OM4 LSZH xm Aqua OM4 50/125 N122.4UUYx LANmark-OF ENSPACE Patch Cord DLC-DLC SM LSZH xm Yellow SingleMode 9/125 = Realizar pedido, = Reservar stock Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m 2/05/16 - http://www.nexans.es Página 9 / 22

LANmark-OF OM3 Patch Cords Optical fiber patch cords LANmark-OF OM3 performance For use in cabinets and workplaces Descripción Guarantees and installation Nexans LANmark-OF optical fibre patch cords have been designed for indoor applications in support of high speed protocols. High speed protocols supported include, but are not limited to Ethernet: 1GBase-SX, 10GBase-SR Fibre channel Serial: 4G, 8G and 16G Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are: Cabinets to connect patch panels to active equipment. Cross connects in data centres. Suitable for use in the work area to connect the workstation to the wall outlet (Fibre To The Desk). Characteristics Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.15 db Minimum return loss according to IEC 61300-3-6: 30 db Colour of Jacket: Aqua LANmark-OF OM3 performance: compliant to IEC60793-2-10, subtype A1a.2 Duplex LC-LC, duplex LC-SC and duplex LC-ST patch cords have a duplex cable construction with a diameter of 2 X 2.0 mm. Duplex SC-SC, duplex SC-ST and duplex ST-ST patch cords have a duplex cable construction with a diameter of 2 X 2.8 mm. Estándares Internacional ISO/IEC 11801 Design Nexans LANmark-OF patchcords designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This conforms to the requirements of IEC 11801 and EN 50174-1:2009. No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 10 / 22

LANmark-OF OM3 Patch Cords Características Características de construcción Tipo de armadura Aramid yarn Fiber optic type OM3 50/125 Cubierta exterior LSZH-FR Características de transmisión Return Loss, Minimum, db 30 db Insertion Loss, maximum, db 0,3 db Características de uso No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C Lista de Productos =Realizar pedido, =Reservar stock Ref. Nexans Nombre Color Tipo de conector N123.5CLAX LANmark-OF Patch Cord Multimode 50/125 OM3 2LC - 2SC LSZH Aqua X m Aqua Duplex SC-LC N123.5LTAX LANmark-OF Patch Cord Multimode 50/125 OM3 2LC - 2ST LSZH Aqua X m Aqua Duplex LC-ST N123.5CCAX LANmark-OF Patch Cord Multimode 50/125 OM3 2SC - 2SC LSZH Aqua X m Aqua Duplex SC-SC N123.5CTAX LANmark-OF Patch Cord Multimode 50/125 OM3 2SC - 2ST LSZH Aqua X m Aqua Duplex SC-ST N123.5TTAX LANmark-OF Patch Cord Multimode 50/125 OM3 2ST - 2ST LSZH Aqua X m Aqua Duplex ST-ST N123.5LLAX LANmark-OF Patch cord Multimode 50/125 OM3 2LC - 2LC LSZH Aqua X m Aqua Duplex LC-LC = Realizar pedido, = Reservar stock No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 11 / 22

LANmark-OF OM4 Patch Cords Optical fiber patch cords LANmark-OF OM4 performance For use in cabinets and workplaces Descripción Guarantees and installation Nexans LANmark-OF optical fibre patch cords have been designed for indoor applications in support of high speed protocols. High speed protocols supported include, but are not limited to Ethernet: 1GBase-SX, 10GBase-SR Fibre channel Serial: 4G, 8G and 16G Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are: Cabinets to connect patch panels to active equipment. Cross connects in data centres. Suitable for use in the work area to connect the workstation to the wall outlet (Fibre To The Desk). Characteristics Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.15 db Minimum return loss according to IEC 61300-3-6: 30 db Colour of Jacket: Aqua LANmark-OF OM4 performance: compliant to IEC60793-2-10, subtype A1a.3 Duplex LC-LC, duplex LC-SC and duplex LC-ST patch cords have a duplex cable construction with a diameter of 2 X 2.0 mm. Duplex SC-SC, duplex SC-ST and duplex ST-ST patch cords have a duplex cable construction with a diameter of 2 X 2.8 mm. Estándares Internacional ISO/IEC 11801 Design Nexans LANmark-OF patchcords designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This conforms to the requirements of IEC 11801 and EN 50174-1:2009. Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 12 / 22

LANmark-OF OM4 Patch Cords Características Características de construcción Tipo de armadura Aramid yarn Fiber optic type OM4 50/125 Cubierta exterior LSZH-FR Características de transmisión Return Loss, Minimum, db 30 db Insertion Loss, maximum, db 0,3 db Características mecánicas Maximum pulling force (IEC 60794-1-2-E1) 200 N Crush resistance (IEC 60794-1-E3) 100 N/cm Características de uso Temperatura ambiente de utilización (rango) -10.. 50 C Lista de Productos =Realizar pedido, =Reservar stock Ref. Nexans Nombre Radio de curvatura mínimo en operación estática (mm) Color Tipo de conector N123.7CLAX N123.7LTAX N123.7CCAX N123.7CTAX N123.7TTAX N123.7LLAX LANmark-OF Patch Cord Multimode 50/125 OM4 2LC - 2SC LSZH Aqua X m LANmark-OF Patch Cord Multimode 50/125 OM4 2LC - 2ST LSZH Aqua X m LANmark-OF Patch Cord Multimode 50/125 OM4 2SC - 2SC LSZH Aqua X m LANmark-OF Patch Cord Multimode 50/125 OM4 2SC - 2ST LSZH Aqua X m LANmark-OF Patch Cord Multimode 50/125 OM4 2ST - 2ST LSZH Aqua X m LANmark-OF Patch cord Multimode 50/125 OM4 2LC - 2LC LSZH Aqua X m Aqua Duplex SC- LC Aqua Duplex LC-ST Aqua Aqua Duplex SC- SC Duplex SC- ST Aqua Duplex ST-ST Aqua Duplex LC-LC = Realizar pedido, = Reservar stock Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 13 / 22

LANmark-OF Ruggedised Patch Cords Ruggedized optical fiber patch cords LANmark-OF OM3, OM4 and SM performance For FTTO, FTTD and installations requiring strong mechanical protection Descripción Construction Each tight buffered fibre of the patch cord is protected by a metal spring. This results in a mechanical robust patch cord with a very high crush resistance. Between the spring and the LSZH jacket aramid yarns are introduced to enhance the pulling force. The spring is very flexible and this results in a patch cord with a bend radius of only 30mm. The patch cord has a duplex cable construction with a diameter of 2 X 2.8 mm. Installation and Guarantees The Ruggedised patch cord is designed for indoor use and complies to following fire performance standards: IEC 60332-1 and IEC 60332-3. Estándares Internacional ISO/IEC 11801 Typical Fibre To The Office (FTTO) installations use this robust patch cord for the connection between the ZD-boxes and the LANactive office switches. The length is hereby often more then 5m and the cords are layed in crowed trunking between all the other wires. Both expose the cord much more to mechanical stress. The metal spring inside the Ruggedised patch cords protects the fibres well. The small bend radius of 30mm allows to route the patch cord through many turns and the short connector boot of 19mm facilitates the connection to the LANactive switch. Also Fibre To The Desk (FTTD) and other challenging environments that require a strong mechanical protection are installations that can benefit from of this new patch cord. Nexans LANmark-OF optical fibre patch cords have been designed for indoor applications in support of high speed protocols. High speed protocols supported include, but are not limited to Ethernet: 1GBase-SX, 1GBase-LX, 10GBase-SR, 10GBase-LR Fibre channel Serial: 4G, 8G and 16G Details on the supported distances can be found in the LANmark-OF warranty modules. Radio de curvatura mínimo en operación estática 30 mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 14 / 22

LANmark-OF Ruggedised Patch Cords Characteristics Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.15 db Minimum return loss according to IEC 61300-3-6: 30 db for Multimode and db for Singlemode Color of Jacket: Aqua for Multimode and Yellow for Singlemode Design Nexans LANmark-OF patch cords are designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This conforms to the requirements of IEC 11801 and EN 50174-1:2009. Características Características de transmisión Insertion Loss, maximum, db 0,3 db Características mecánicas Maximum pulling force (IEC 60794-1-2-E1) 0 N Crush resistance (IEC 60794-1-E3) 500 N/cm Características de uso Radio de curvatura mínimo en operación estática 30 mm Temperatura ambiente de utilización (rango) -10.. 50 C Lista de Productos Ref. Nexans Nombre Fiber optic type N123R.5LLAX LANmark-OF Ruggedised Patch Cord Duplex LC Duplex LC OM3 LSZH Xm Aqua OM3 50/125 N123R.7LLAX LANmark-OF Ruggedised Patch Cord Duplex LC Duplex LC OM4 LSZH Xm Aqua OM4 50/125 N123R.4LLYX LANmark-OF Ruggedised Patch Cord Duplex LC Duplex LC Singlemode LSZH Xm Yellow SingleMode 9/125 = Realizar pedido, = Reservar stock Radio de curvatura mínimo en operación estática 30 mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 15 / 22

LANmark-OF Singlemode Patch Cords Optical fiber patch cords LANmark-OF singlemode performance For use in cabinets and workplaces Descripción Guarantees and installation Nexans LANmark-OF optical fibre patch cords have been designed for indoor applications in support of high speed protocols. High speed protocols supported include, but are not limited to Ethernet: 1GBase-SX, 10GBase-SR Fibre channel Serial: 4G, 8G and 16G Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are: Cabinets to connect patch panels to active equipment. Cross connects in data centres. Suitable for use in the work area to connect the workstation to the wall outlet (Fibre To The Desk). Estándares Internacional ISO/IEC 11801 Characteristics Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.15 db Minimum return loss according to IEC 61300-3-6: db Colour of Jacket: Yellow LANmark-OF Singlemode OS2 performance: compliant to IEC60793-2-50, subtype B1.3 Duplex LC-LC, duplex LC-SC and duplex LC-ST patch cords have a duplex cable construction with a diameter of 2 X 2.0 mm. Duplex SC-SC, duplex SC-ST and duplex ST-ST patch cords have a duplex cable construction with a diameter of 2 X 2.8 mm. Design Nexans LANmark-OF patchcords designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This conforms to the requirements of IEC 11801 and EN 50174-1:2009. Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 16 / 22

LANmark-OF Singlemode Patch Cords Características Características de construcción Tipo de armadura Aramid yarn Fiber optic type SingleMode 9/125 Color Yellow Cubierta exterior LSZH-FR Características de transmisión Insertion Loss, maximum, db 0,3 db Características mecánicas Maximum pulling force (IEC 60794-1-2-E1) 200 N Características de uso Temperatura ambiente de utilización (rango) -10.. 50 C Lista de Productos =Realizar pedido, =Reservar stock Ref. Nexans Nombre Radio de curvatura mínimo en operación estática (mm) Tipo de conector Return Loss, Minimum, db (db) N123.4CLYX N123.4LTYX N123.4CCYX N123.4CTYX N123.4TTYX N123.4LLYX LANmark-OF Patch Cord Singlemode 9/125 OS2 2LC - 2SC LSZH Yellow X m LANmark-OF Patch Cord Singlemode 9/125 OS2 2LC - 2ST LSZH Yellow X m LANmark-OF Patch Cord Singlemode 9/125 OS2 2SC - 2SC LSZH Yellow X m LANmark-OF Patch Cord Singlemode 9/125 OS2 2SC - 2ST LSZH Yellow X m LANmark-OF Patch Cord Singlemode 9/125 OS2 2ST - 2ST LSZH Yellow X m LANmark-OF Patch cord Singlemode 9/125 OS2 2LC - 2LC LSZH Yellow X m Duplex SC- LC Duplex LC- ST Duplex SC- SC Duplex SC- ST Duplex ST- ST Duplex LC- LC = Realizar pedido, = Reservar stock Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 17 / 22

LANmark-OF Slimflex Uniboot Patch Cord Duplex LC Optical fibre patch cords LANmark-OF performance For use in cabinets and workplaces Bend radius reduced to 7.5 mm GIGAliteFLEX bend insensitive fibre Round patch cord with uniboot design Reverse polarity uniboot connector Descripción Optimised for data centres environments LANmark-OF Slimflex patch cords have a very small bend radius of 7.5 mm due to the use of advanced sheathing material and GIGAliteFLEX bend insensitive fibre. The small bend radius of the patch cord is beneficial in high density patching areas where a lot of bends are common. There is a high risk that the larger bend radius ( mm) of traditional patch cords is not maintained resulting in high attenuation and loss of transmission. The round design of the Slimflex patch cord results in a small bend radius in any direction. Traditional patch cords based on a zipcord design have a bend radius that is dependent on the orientation. The advanced sheathing material allows a very flexible patch cord without any memory or kink effect. The advanced sheathing material has higher resistance to abrasion and cutting compared to traditional LSZH material. This results in reduced sheath damage when pinched between doors or around sharp bends. With the round design of the patch cable the area required for the patch cord has also been reduced by 30 % resulting in space savings and reduced disturbance of the airflow for cooling. For the support of the advanced high speed Ethernet protocols with stringent power budgets the Slimflex patch cord features a low loss performance of 0.3 db. This increases the headroom in the channel and reduces the risk of down time. The polarity of the Slimflex patch cord can be changed by opening the uniboot connector on one side and change the position of the 2 LC connectors. A black and red plastic square have been attached to the left and the right connector for identification. For standard optical crossed patch cord the black square is always on the same side on both ends of the patch cords. After switching the connectors on one side the patch cord becomes optical straight and can be used for some rare legacy applications that have a non-standard polarity. Estándares Internacional ISO/IEC 11801 Characteristics Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m 2/05/16 - http://www.nexans.es Página 18 / 22

LANmark-OF Slimflex Uniboot Patch Cord Duplex LC Patch cord cable is according to IEC 60794-2-50 Maximum insertion loss according to IEC 61300-3-4: 0.3 db Typical insertion loss: 0.15 db GIGAliteFLEX bend insensitive fibre Guarantees and installation Nexans LANmark-OF optical fibre patch cords have been designed for indoor applications in support of high speed protocols. Details on the supported distances can be found in the LANmark-OF warranty modules. Typical installation environments are: Cabinets to connect patch panels to active equipment. Cross connects in data centres. Suitable for use in the work area to connect the workstation to the wall outlet (Fibre To The Desk). Design Nexans LANmark-OF patchcords designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This complies to the requirements of IEC 11801 and EN 50174-1:2009. Características Características de transmisión Insertion Loss, maximum, db Características mecánicas Mechanical resistance to impacts (IEC 60794-1-E4) Maximum pulling force (IEC 60794-1-2-E1) Crush resistance (IEC 60794-1-E3) 0,3 db 10 impacts of 1 N.m 200 N 100 N/cm Mechanical resistance to impacts (IEC 60794-1-E4) 10 impacts of 1 N.m 2/05/16 - http://www.nexans.es Página 19 / 22

Latiguillos LANmark-OF Descripción Application Nexans LANmark-OF optical fibre patchcords have been designed for applications where a high level of optical features is required. Suitable for use in cabinets to connect patch panels/active equipments to active equipments. Suitable for use in the work area to connect the work station to the wall outlet (Fibre To The Desk). Applications support : FDDI 100 Mbps Ethernet 10 base FL Fast Ethernet 100 base FX Gigabit Ethernet 1000 base SX/LX 10 Gigabit Ethernet 10G Base LX Fibre Channel 266 Mbps Fibre Channel 1000 Mbps ATM 155 Mbps ATM 622 Mbps Performance Nexans LANmark-OF patchcords are available in all standardised optical fibre classes, multimode and single mode.the MM62.5 version is designed for use in an OM1 compliant system, the MM50 version for OM2 systems and the MM50 OM3 version for OM3 systems. The singlemode version is OS1 compliant. The multimode versions can be used in laser optimised systems using the LANmark- OF xt cables. Estándares Internacional ISO/IEC 11801 Design Nexans LANmark-OF patchcords designed according the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). Guarantees Nexans LANmark-OF patchcords are guaranteed to support LED based applications as well as Laser based applications.they are covered by Nexans warranty as described in the General Terms and Conditions. Technical data - Physical Flame Retardance (Cable) IEC 332-3C Temperature rating -10/ +50 C Technical data - Mechanical Mechanical data Cable Retention < 68 N No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 20 / 22

Latiguillos LANmark-OF Características Características de construcción Tipo de armadura Aramid yarn Cubierta exterior LSZH-FR Características mecánicas Fuerza de tracción máxima durante la instalacción 0,2 kn Crush resistance (IEC 60794-1-E3) 250 N/cm Características de uso No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C Optical Performance Patch Cords Fibre type Connector Polishing Insertion loss max. Return loss min. Multimode ST-SC-LC PC 0,3 db > 30 db Multimode MT-RJ PC 0,3 db NA Singlemode ST-SC-LC PC 0.3 db > db Singlemode SC-LC APC 0,3 db > 55 db Singlemode MT-RJ NA NA NA No propagador del incendio IEC 60332-3 Cat.C Radio de curvatura mínimo en operación estática mm Temperatura ambiente de utilización (rango) -10.. 50 C 2/05/16 - http://www.nexans.es Página 21 / 22

Experto global en cables y sistemas de cableado Distribuído por : Nexans Iberia, S.L. - Ctra. de Sentmenat, Km 2,6 - E-08213 Polinyà (Barcelona) - España +34 93 713 11 33 -