MODEL 65016 DOUBLE-ENDED SHEAR BEAM LOAD CELL APPLICATIONS Tank, bin and silo weighing Batching, blending and mixing systems Level and inventory monitoring FEATURES Rated capacities of 1,000 to 300,000 pounds Insensitive to side loads and bending moments High output - well suited to high deadload/low liveload applications Load cells have matched outputs for multi-cell systems Excellent combined error and repeatability Integral conduit adaptor Weighing assemblies available Extended temperature ranges available to 400 o F/200 o C Sensorgage TM sealed to IP67 standards Cell Guard TM Two Year Warranty Factory Mutual System Approved for Class I, II, III; Divisions 1 and 2; Groups A through G. Also, Non-Incendive ratings (No Barriers!). ISO 9001 Certified manufacturing facilities Balanzas y Básculas S.A. de C.V. Av. Tecnológico Norte N 148 Int. 32 Condominio Industrial El Fénix ISO 9001 (442) 210-22-00 www.balanzasybasculas.com IP 67 65016-0104W 65016-TWA CALIF 1 (626) 331-0502 USA 1 (800) 722-0820 CANADA 1 (800) 321-0820 MEXICO 95 (800) 722-0820 FAX 1 (626) 332-3418 visit our website at www.sensortronics.com e-mail: info@sensortronics.com 9/97
Model 65016 Performance Specifications Rated Capacities (lbs): 1K, 1.5K, 2.5K, 5K, 10K, 15K, 25K, 35K, 50K, 75K, 100K, 125K, 200K, 300K Full Scale Output (FSO): 3.0 mv/v ± 0.25% Accuracy Class: Standard Accuracy Class: Standard Combined Error % FSO <.03 Non-Linearity % FSO <.03 Hysteresis % FSO <.02 Creep Error % FSO < 0.03 in 20 minutes Non-Repeatability % FSO <.01 Zero Balance % FSO < 1.0 Insulation Resistance > 1000 Mohms at 50VDC Temperature Effect on: Zero % FSO/ o F < 0.0015 Output % of Load / o F < 0.0008 Compensated Temp. Range 14 o to 104 o F / -10 o to 40 o C Operating Temp. Range 0 o to 150 o F / -18 o to 65 o C Storage Temp. Range -60 o to 185 o F / -50 o to 85 o C Input Resistance 686-714 Ohms Output Resistance 699-707 Ohms Recommended Excitation Voltage 15 Volts DC Maximum Excitation Voltage 25 Volts DC Safe Sideload 100% of Rated Capacity Safe Overload 150% of Rated Capacity Ultimate Overload 300% of Rated Capacity Sideload Rejection Ratio 500:1 Sealing Meets IP67 Standards Material Alloy Tool Steel Finish Electroless Nickel Plated 1,000 to 50,000 Capacities 4 CO NDUCTOR CABLE; 22 AWG., SHIELDED & JACKETED; 25 FOOT STANDARD LENGTH OR PER SALES ORDER. "F" AREA FOR LOADING PAD ARROW INDICATES DIRECTION OF LOAD FOR POSITIVE (+) POLARITY "A1" DIAMETER "G" "A2" "H" THREAD CONDUIT ADAPTOR "D" RECESSED STAINLESS STEEL SIDE COVERS "C" +/- 0.015 "B" DIAMETER "E" THRU, 2 PLACES 75,000 to 300,000 Capacities "H" THREAD CONDUIT ADAPTOR "D" "B" "C" +/- 0.015 "F" "G " "A1" 4 CONDUCTOR CABLE; 22 AWG., SHIELDED & JACKETED; 25 FOOT STANDARD LENGTH OR PER SALES ORDER. "A2" DIAMETER "E" THRU, 2 PLACES RECESSED STAINLESS STEEL COVERS ARROW INDICATES DIRECTION OF LOAD FOR POSITIVE (+) POLARITY CAPACITY A1 A2 B C D E F G Thread Deflection Weight 1K - 5K 1.25 1.25 7.50 6.25 0.62 0.50 1.22 1.25 1/4-18NPT 0.017 3.0 10K - 25K 1.44 1.94 8.75 7.50 0.62 0.81 1.62 1.99 1/4-18NPT 0.022 8.0 35K 1.50 2.50 8.75 7.50 0.62 0.81 1.62 2.50 1/4-18NPT 0.036 27.0 50K 2.44 2.94 13.50 11.50 1.00 1.31 3.25 2.99 1/2-14NPT 0.052 27.0 75K 2.44 2.94 13.50 11.50 1.00 1.31 3.12 0.18 1/2-14NPT 0.070 55.0 100K - 125K 2.94 3.94 18.50 15.00 1.75 1.63 3.25 0.25 1/2-14NPT 0.090 55.0 200K 3.80 5.80 20.50 17.00 1.75 2.13 4.13 0.50 1/2-14NPT 0.090 110.0 300K 3.80 5.80 23.50 18.75 2.38 2.63 5.13 0.50 1/2-14NPT 0.090 110.0 Dimensions are in inches. Capacities are in pounds. Deflection is ±10%. Specifications are subject to change. Certified drawings are available. WIRING FUNCTION COLOR + Excitation Red Excitation Black + Output Green Output White CALIF 1 (626) 331-0502 USA 1 (800) 722-0820 CANADA 1 (800) 321-0820 MEXICO 95 (800) 722-0820 FAX 1 (626) 332-3418 visit our website at www.sensortronics.com e-mail: info@sensortronics.com 9/97
MODELO 65040 CELDA DE CARGA TIPO SHEAR BEAM DE DOS SECCIONES Aplicaciones Básculas camioneras Básculas ferrocarrileras Pesaje de tanques, recipientes y tolvas clasificados como "Legal para Comercio" Características Rango de Capacidades de 25,000 a 125,000 libras Punto de apoyo al centro y soporte de carga en los extremos Adaptador de conductor integrado Certificadas para la industria por NTEP Clase IIIL:10,000 divisiones y OIML R60:3,000 divisiones Sellado Sensorgage bajo standards IP67 Garantía Cell Guard de dos años que incluye protección contra la humedad Versión en Acero Inoxidable disponible Aprobadas por el Factory Mutual System para Clases I, II, III; Divisiones 1 & 2; Grupos A al G. Y además, bajo clasificación de No-Incendiarias (Sin Barreras Intrínsecas) Fabricadas en Instalaciones Certificadas por ISO 9001 ISO 9001 IP 67 65040W Balanzas y Básculas SENSORTRONICS 677 ARROW GRAND CIRCLE COVINA, CALIFORNIA Av. Tecnológico 91722 Norte N USA 148 Int. 32 Condominio Industrial El Fénix CALIFORNIA 1 (626) 331-0502 FAX 1 (626) 332-3418 TEL.DESDE MEXICO Querétaro, 001 (800) Qro. 722-0820 México. visite nuestra página en la red en www.sensortronics.com e-mail: info@sensortronics.com 6/00 (442) 210-22-00 www.balanzasybasculas.com
MODELO 65040 ESPECIFICACIONES DE FUNCIONAMIENTO Capacidad Nominal (lbs) 25K, 40K, 50K, 60K, 75K, 100K y 125K Salida a Plena Escala (PE) 3.0 mv/v ±0.25% Clase de Precisión Estándard NTEP OIML Clase 3 Clase IIIL R60 Error Combinado (% PE) <.03 10,000 3,000 No-Linealidad (% PE) <.03 Divisiones Divisiones Histéresis (% PE) <.02 Múltiple Variación de la señal en 20 <.03 minutos (% PE) Temperatura/Rango 14 o a 104 o F Compensado -10 o a 40 o C Efectos de Temperatura Cero (% PE / o F) <.0015 Span (% de carga / o F) <.0008 Temperatura de Operación 0 o a 150 o F / -18 o a 65 o C Temperatura de Almacenamiento -60 o a 185 o F / -50 o a 85 o C No-Repetibilidad (% PE) < 0.01 Ajuste de Cero (% PE) ± 1.0 Resistencia de Aislamiento > 1000 Mohms a 50 VDC Voltaje de Excitación (típico) 10-15 VDC (25 Max) Sobrecarga Admisible (% PE) 150 Sobrecarga Límite (% PE) 300 Carga Lateral Admisible (% PE) 100 Factor de Rechazo de Carga Lateral 500:1 Sellado Protegidas de los elementos del medio ambiente bajo standards IP67 Material / Acabado Acero Aleado Niquelado ó Acero Inoxidable Acabado Niquelado Resistencia del Puente: Entrada (ohms) 686-714 Salida (ohms) 699-707 Cableado Rojo: + Entrada Negro: - Entrada Verde: + Salida Blanco: - Salida Capacidad A1 A2 B C D E F G H J Deflección Peso 25K - 40K 1.94 2.44 8.25 7.25 2.0 1.63 1.75 0.50 0.50 0.50 0.02 11.0 50K - 75K 1.94 2.94 11.50 10.00 2.2 1.70 2.00 0.75 0.75 1.00 0.04 18.0 100K - 125K 2.90 3.86 14.50 12.50 3.2 2.44 2.75 1.00 1.00 1.50 0.06 42.0 Dimensiones en pulgadas. Capacidades en libras. Deflección de ±10%. Especificaciones sujetas a cambio. Diagramas Certificados disponibles. CALIFORNIA 1 (626) 331-0502 FAX 1 (626) 332-3418 TEL.DESDE MEXICO 001 (800) 722-0820 visite nuestra página en la red en www.sensortronics.com e-mail: info@sensortronics.com 6/00
MODELO 65058 CELDA DE CARGA TIPO SHEAR BEAM DE DOS SECCIONES CON SOPORTE DE CARGA AL CENTRO Aplicaciones Básculas camioneras Básculas ferrocarrileras Pesaje de tanques, recipientes y tolvas dentro del término "Legal para comercio" Características Rango de Capacidades de 10,000 a 500,000 libras Soporte de carga en el centro Adaptor de conductor integrado Montaje para pesaje de básculas camioneras disponible Modelo 65058 TSA Certificado para la industria por NTEP Clase IIIL:10,000 divisiones y OIML R60:3,000 divisiones de 20K a 200K Sellado Sensorgage bajo standards IP67 Garantía Cell Guard de dos años que incluye protección contra la humedad Rangos extendidos de temperatura disponibles Aprobadas por el Factory Mutual System para Clases I, II, III; Divisiones 1 & 2; Grupos A al G. Y además, bajo clasificación de No-Incendiarias (Sin Barreras Intrínsecas) Fabricadas en Instalaciones Certificadas por ISO 9001 ISO 9001 CALIFORNIA 1 (626) 331-0502 FAX 1 (626) 332-3418 TEL.DESDE MEXICO 001 (800) 722-0820 visite nuestra página en la red en www.sensortronics.com e-mail: info@sensortronics.com 6/00
MODELO 65058 ESPECIFICACIONES DE FUNCIONAMIENTO Capacidad Nominal (lbs) 10K, 20K, 25K, 40K, 50K, 60K, 75K, 100K, 125K, 150K y 200K Salida a Plena Escala (PE) 3.0 mv/v +0.25% Clase de Precisión Estándard NTEP OIML Clase 3 Clase IIIL R60 Error Combinado (% PE) <.03 10,000 3,000 No-Linealidad (% PE) <.03 Divisiones Divisiones Histéresis (% PE) <.02 Múltiple Variación de la señal en 20 <.03 minutos (% PE) Temperatura/Rango 14 o a 104 o F Compensado -10 o a 40 o C Efectos de Temperatura Cero (% PE / o F) <.0015 Span (% de carga / o F) <.0008 Temperatura de Operación Temperatura de Almacenamiento 0 o a 150 o F / -18 o a 65 o C -60 o a 185 o F / -50 o a 85 o C Resistencia del Puente: Entrada (ohms) 686-714 No-Repetibilidad (% PE) <0.01 Ajuste de Cero (% PE) +1.0 Salida (ohms) 699-707 Voltaje de Excitación (típico) 10 VDC (15 Max) Sobrecarga Admisible (% PE) 150 Sobrecarga Límite (% PE) 300 Carga Lateral Admisible (% PE) 100 Factor de Rechazo de Carga Lateral 500:1 Sellado Protegido de los elementos del medio ambiente bajo standards IP67 Material Acero Aleado Acabado Niquelado Cableado Rojo: +Excitación Negro: -Excitación Verde: +Salida Blanco: -Salida Capacidades A1 A2 B C D F G H J K L Deflección Peso 10K - 25K 1.69 1.94 7.75 6.50 1.70.68 1.38.75.90 1.63 0.015 9.0 1/4-18 NPT 40K 1.94 2.44 10.25 8.50 2.10.81 1.93 1.00 1.12 2.00 0.020 11.0 50K - 75K 2.44 2.94 10.25 8.50 2.65 1.06 1.93 1.00 1.37 2.54 0.035 20.0 100K - 125K 2.90 3.86 15.25 12.75 3.43 1.62 3.13 1.50 1.80 3.30 1/2-14 NPT 0.040 40.0 150K - 200K 3.80 5.80 19.25 15.25 5.12 1.62 4.00 2.00 2.37 4.44 0.060 9.0 Dimensiones en pulgadas. Capacidades en libras. Deflección ±10%. Especificaciones sujetas a cambio. Diagramas Certificados disponibles. CALIFORNIA 1 (626) 331-0502 FAX 1 (626) 332-3418 TEL.DESDE MEXICO 001 (800) 722-0820 visite nuestra página en la red en www.sensortronics.com e-mail: info@sensortronics.com 6/00
Welded, Stainless Steel Double-Ended Shear Beam Load Cell 65016-TWA 65086 FEATURES Model 65016-0104W Vishay Sensortronics Rated capacities of 1000 to 75,000 pounds Stainless steel, welded seal construction Insensitive to side loads and bending moments High output - well suited to high deadload/low liveload applications Load cells have matched outputs for multi-cell systems Integral conduit adaptor Sensorgage sealed to IP67 standards Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!). OPTIONAL FEATURE Fully hermetically sealed available DESCRIPTION 65016-0104W is designed to be center-mounted with double-linked loading. This design provides free movement in all horizontal directions virtually eliminating binding or friction points. The double Shear Beam design gives excellent performance for high capacity loading. OUTLINE DIMENSIONS in inches 65016-0104W is constructed of stainless steel and is designed to work in extremely harsh environment such as chemical and food industry. APPLICATIONS Hostile environments: Food and beverage processing Chemical and plastics processing Pharmaceutical and biomedical processing Tank, bin and silo weighing Batching, blending and mixing systems Level and inventory monitoring Wiring +Excitation Red - Excitation Black +Output Green - Output White CAPACITY A1 A2 B C D E F G THREAD 1K - 5K 1.22 1.22 7.50 6.25 0.62 0.50 1.12 1.25 1/4-18NPT 10K - 25K 1.44 1.94 8.75 7.50 0.62 0.81 1.62 1.99 1/4-18NPT 35K 1.44 2.44 8.75 7.50 0.62 0.81 1.62 2.50 1/4-18NPT 50K - 75K 2.44 2.94 13.50 11.50 1.00 1.31 3.25 2.99 1/2-14NPT Capacities are in pounds. Document Number: 11598 www.vishaymg.com Revision 10-Apr-07 1
Model 65016-0104W Vishay Sensortronics Welded, Stainless Steel Double-Ended Shear Beam Load Cell SPECIFICATIONS PARAMETER VALUE UNIT Rated capacity-r.c. (E max ) 1K, 1.5K, 2.5K, 5K, 10K, 15K, 25K, 35K, 50K, 75K lbs NTEP/OIML Accuracy class Standard Maximum no. of intervals (n) -- Rated output-r.o. 3.0 mv/v Rated output tolerance 0.25 ±% mv/v Zero balance 1.0 ±% FSO Non-linearity 0.07% ±% FSO Hysteresis 0.07% ±% FSO Non-repeatability 0.01 ±% FSO Creep error (20 minutes) 0.03 ±% FSO Temperature effect on zero 0.0015 ±% FSO/ F Temperature effect on output 0.0008 ±% of load/ F Compensated temperature range 14 to 104 (-10 to 40) F ( C) Operating temperature range 0 to 150 (-18 to 65) F ( C) Storage temperature range -60 to 185 (-50 to 85) F ( C) Sideload rejection ratio 500:1 Safe sideload 100 % of R.C. Maximum safe central overload 150 % of R.C. Ultimate central overload 300 % of R.C. Excitation, recommended 15 Vdc or Vac rms Excitation, maximum 25 Vdc or Vac rms Input impedance 686-714 Ω Output impedance 699-707 Ω Insulation resistance at 50VDC >1000 MΩ Material Stainless steel Environmental protection FSO -Full Scale Output All specifications subject to change without notice. IP67 IP68 welded seals, glass to metal seal Standard Special VISHAY TRANSDUCERS (VT) SALES OFFICES VT Americas City of Industry, CA PH: +1-626-858-8899 FAX: +1-626-332-3418 vt.us@vishaymg.com VMG UK Basingstoke PH: +44-125-646-2131 FAX: +44-125-647-1441 vt.uk@vishaymg.com VMG Germany Heilbronn PH: +49-7131-3901-260 FAX: +49-7131-3901-2666 vt.de@vishaymg.com VMG France Chartres PH: +33-2-37-33-31-20 FAX: +33-2-37-33-31-29 vt.fr@vishaymg.com VT Netherlands Breda PH: +31-76-548-0700 FAX: +31-76-541-2854 vt.nl@vishaymg.com VMG Israel Netanya PH: +972-9-863-8888 FAX: +972-9-863-8800 vt.il@vishaymg.com VT China Tianjin PH: +86-22-2835-3503 FAX: +86-22-2835-7261 vt.prc@vishaymg.com VT Taiwan* Taipei PH: +886-2-2696-0168 FAX: +886-2-2696-4965 vt.roc@vishaymg.com *Asia except China www.vishaymg.com Document Number: 11598 2 Revision 10-Apr-07
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Balanzas y Básculas Av. Tecnológico Norte N 148 Int. 32 Condominio Industrial El Fénix Querétaro, Qro. México. (442) 210-22-00 www.balanzasybasculas.com Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1