Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction Elena Blanco Fernández This topic is published under License: Creative Commons BY-NC-SA 4.0
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction Case studies. 2
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction H-KNOW ADVANCED INFRASTRUCTURE FOR KNOWLEDGE BASED SERVICES FOR BUILDINGS RESTORING Financed by 7th Framework Programme of the European Commission www.h-know.eu The project has developed technical solutions based on ICT that are affordable for SMEs, including: Knowledge sharing Collaboration management Training services for engineers Total budget: 2,639,582.00 Duration: 2008-2011 (3 years) Master s participant: Faculdade de Engenharia Universidade do Porto 3
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction H-KNOW The partners: 4
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction H-KNOW 5
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction LA CIUDAD MULTIDIMENSIONAL THE MULTIDIMENSIONAL CITY. Financed by the Ministry of Science and Innovation through ERDF funds (European Regional Development Fund) www.cimne.com/websasp/geost/ Achieve a sustainable development of construction activities Optimize the efficiency in all project phases (design, construction, operation) Improve the occupational health and safety through training and technological improvements Consider all aspects of the lifecycle of underground works in an integrated way Total budget: 2,639,582.00 Duration: 2008-2012 (4 years) Master s participant: Grupo GITECO (Universidad de Cantabria) 6
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction LA CIUDAD MULTIDIMENSIONAL The partners: Project Leader Rest of participants 7
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction LA CIUDAD MULTIDIMENSIONAL 8
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction ALCANZA DESIGN OF A NEW PUSHING SYSTEM OF METAL BRIDGES (MIX BRIDGES) WITH CONSTANT SECTION Financed by the Spanish Ministry of Economy and Competitiveness through ERDF funds (European Regional Development Fund). www.ptcarretera.es/proyecto_alcanza.html Apply the pushed-bridge technique to metal or mix bridges with any section Increase the current span length, from 60m to 150m for pushed-bridges Increase the pushing velocity from 6m/h to 15m/h Total budget: 355,965.00 Duration: 2010-2013 (3 years) Master s participant: Grupo GITECO (Universidad de Cantabria) 9
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction ALCANZA The partners: 10
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction ALCANZA 11
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction DYNAMIC BARRIERS DEVELOPMENT OF A PREDICTIVE MODEL FOR DYNAMIC BARRIERS BASED ON RESULTS OBTAINED FROM IN SITU TESTS Financed by the public enterprise SODERCAN, belonging to Regional Government of Cantabria http://www.mallatalud.com/obracivil/idi.php Perform in situ test on dynamic barriers simulating rock impacts, including instrumentation Certificate the barrier according to ETAG-27 Suggest modifications to barrier design according to results Total budget: 75,400.00 Duration: 2010-2011 (1 year) Master s participant: Grupo GITECO (Universidad de Cantabria) 12
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction DYNAMIC BARRIERS The partners: 13
Introduction to Sustainable Construction Module 2. Research, Development and Innovation in Construction DYNAMIC BARRIERS 14
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción Elena Blanco Fernández Este tema se publica bajo Licencia: Creative Commons BY-NC-SA 4.0
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción Casos prácticos. 51
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción H-KNOW INFRAESTRUCTURAS AVANZADAS PARA SERVICIOS BASADOS EN EL CONOCIMIENTO PARA LA RESTAURACIÓN DE EDIFICIOS Financiado por el Séptimo Programa Marco de la Unión Europea www.h-know.eu El Proyecto ha desarrollado soluciones técnicas basadas en las TICs que son económicamente viables para PYMEs: Compartición del conocimiento Gestión de la colaboración Servicios de formación para ingenieros Presupuesto total: 2.639.582,00 Duración: 2008-2011 (3 años) Participantes del Master: Faculdade de Engenharia Universidade do Porto 52
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción H-KNOW Los socios: 53
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción H-KNOW 54
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción LA CIUDAD MULTIDIMENSIONAL LA CIUDAD MULTIDIMENSIONAL Financiado por el Ministerio de Ciencia e Innovación mediante fondos FEDER (Fondo Europeo de Desarrollo Regional) www.cimne.com/websasp/geost/ Alcanzar un desarrollo sostenible de las actividades de construcción Optimizar la eficacia en todas las fase del proyecto (diseño, construcción, explotación) Mejorar la seguridad y salud laboral a través de la formación y mejoras tecnológicas Considerar todos los aspectos del ciclo de vida de las obras subterráneas de forma integrada Presupuesto total: 2.639.582,00 Duración: 2008-2012 (4 años) Participantes del Master: Grupo GITECO (Universidad de Cantabria) 55
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción LA CIUDAD MULTIDIMENSIONAL Los socios: Líder del Proyecto Otros participantes: 56
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción LA CIUDAD MULTIDIMENSIONAL 57
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción ALCANZA DISEÑO DE UN NUEVO SISTEMA DE EMPUJE DE PUENTES METÁLICOS (MIXTOS) Y SECCIÓN CONSTANTE Financiado por el Ministerio de Economía y Competitividad mediante fondos FEDER (Fondo Europeo de Desarrollo Regional). www.ptcarretera.es/proyecto_alcanza.html Aplicar la técnica de empuje en puentes metálicos o mixtos de cualquier sección Incrementar el vano actual de 60m a 150m para puentes empujados Aumentar la velocidad de empuje de 6m/h a 15m/h Presupuesto total: 355.965,00 Duración: 2010-2013 (3 años) Participantes del Master: Grupo GITECO (Universidad de Cantabria) 58
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción ALCANZA Los socios: 59
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción ALCANZA 60
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción PANTALLAS DINÁMICAS DESARROLLO DE UN MODELO PREDICTIVO PARA PANTALLAS DINÁMICAS BASADO EN LOS RESULTADOS OBTENIDOS EN ENSAYOS EN CAMPO Financiado por la sociedad publica SODERCAN, perteneciente Gobierno de Cantabria http://www.mallatalud.com/obracivil/idi.php Realizar ensayos en campo sobre pantallas dinámicas simulando impactos de roca, incluyendo instrumentación in situ. Certificar la barrera de acuerdo a la norma ETAG-27 Proponer modificaciones a la pantalla teniendo en cuenta los resultados de los ensayos Presupuesto total: 75,400.00 Duración: 2010-2011 (1 año) Participantes del Master: Grupo GITECO (Universidad de Cantabria) 61
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción PANTALLAS DINÁMICAS Los socios: 62
Introducción a la Construcción Sostenible Módulo 2. Investigación, Desarrollo e Innovación en la Construcción PANTALLAS DINÁMICAS 63