Installation and Maintenance Instructions

Tamaño: px

Comenzar la demostración a partir de la página:

Download "Installation and Maintenance Instructions"

Juan Antonio Fernández Venegas
hace 7 años
Vistas:

1 Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one () year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/ or replace it. To obtain warranty service, products must be returned to... T&S Brass and Bronze Works, Inc. Attn: Warranty Repair Department Saddleback Cove Travelers Rest, SC 0 Shipping, freight, insurance, and other transportation charges of the product to T&S and the return of repaired or replaced product to the purchaser are the responsibility of the purchaser. Repair and/or replacement shall be made within a reasonable time after receipt by T&S of the returned product. This warranty does not cover Items which have received secondary finishing or have been altered or modified after purchase, or for defects caused by physical abuse to or misuse of the product, or shipment of the products. Any express warranty not provided herein, and any remedy for Breach of Contract which might arise, is hereby excluded and disclaimed. Any implied warranties of merchantability or fitness for a particular purpose are limited to one year in duration. Under no circumstances shall T&S be liable for loss of use or any special consequential costs, expenses or damages. Some states do not allow limitations on how long and implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Specific rights under this warranty and other rights vary from state to state. P/N: Rev. Date: 00 Drawn: CW Checked: MAB -- Approved: MVW -- B--K Parts Kit B-00 Pre-Rinse Spray Deutsch: Installations- und Wartungsanleitungen Español: la Instalación y las Instrucciones de Mantenimiento Français: les Instructions d Installation et d Entretien

2 Exploded View 0 * Some items are listed for instructional purposes and may not be sold as separate parts.

3 Pre-Rinse Assembly Part Number Guide Asm Body, Valve 00-0 Body, Valve O -Ring, Bonnet 000- Spring 000- Cap Insert, Spray Valve * Quad Ring * Washer, Bonnet 000- Asm, Stem * 0 Washer, Seat 000- O -Ring, Insert 000- Cap, Hex (T&S) Washer, GN Tip 000- Asm, Spray Head Washer, Ring Washer, Hose Barrel 00- Hose, SS Flex B-00-H Adapter 000- Replacement Parts Kit - (B-K) Spring 000- Washer, Bonnet 000- Packing Stem Seat Washer 000- 'O'-Ring 000- Washer, # 00-

4 To replace worn parts: General Instructions. Shut off water supply and drain lines. Hold no. in one hand, with no. in palm and unscrew no. at bottom of no. with a wrench.. Unscrew no. and remove from no.. Discard old no. and replace with new no.. Place no. on top of no., under new no.. Place no. on top of no., loosely.. Remove no.. Discard and replace no.. 0,. Holding no. in hand, unscrew no. and remove.. Hold no. (in place) and no. in one hand, push and screw no. up through no. until snug stem 0 seat holder. To replace no., unscrew no. from no. and remove, then replace with new no.. (Both ends if necessary).. Unscrew stem from seat holder, discard old no.0 and replace with new no.0. Reassemble these three parts.

5 Instrucciones Generales Para reemplazar las partes desgastadas:. Cierre la fuente principal de agua y desagüe las tuberias. Sostenga la parte No. en la mano con la parte No. en la palma, destornille la parte No. a la base de la parte No. con una llave.. Remueva la parte No.. Desheche y reemplaze la parte No... Destornille la parte No. y remuévala de la parte No.. Desheche la parte vieja No. y reemplaze con una parte nueva No.. Flojamente coloque la parte No. sobre la parte No.. 0,. Sosteniendo la parte No. en la mano, destornille la parte No. y remueva.. Sostenda la parte No. (en sitio) y la parte No. en una mano, empuje y atornille la parte No. a través de la parte No., hasta que este ajustado. tallo sostén del 0 aciento. Destornille el tallo del sostén del aciento, desheche la parte vieja No.0 y reemplaze con una parte No.0 nueva. Reensamble estas tres partes.. Reemplaze la parte No., destornille la parte No. de la parte No. y remuévela, luego reemplaze con una parte nueva No.. (Ambos lados si es necesario.)

6 Instructions Générales Pour remplacer les parties usées:. Fermer la réserve de l eau et égoutter la tuyauterie. Tenir N. dans un main, avec le N. dans la paume et dévisser N. au fond de N. avec une clef.. Enlever N.. Mettre au rebut et remplacer N... Dévisser N. et enlever de N.. Mettre au rebut le vieux N. et replacer avec un nouveau N.. Mettre N. sur N. et le nouveau N.. Mettre N. sur N. sans serrer. 0,. En tenant N. dans le main, dévisser N. et enlever.. Tenir N. (à sa place) et N. dans un main, pousser et visser N. à travers N. jusqu il être bien ajusté. Le Tuyau 0 Le Lieu Où Rester Le Joint D Étanchéité. Dévisser le tuyau du lieu où rester le joint d étanchéité et mettre au rebut le vieux N.0 et replacer avec un nouveau N.0. Réassembler ces trois parties.. Pour remplacer N., dévisser N. de N. et enlever, puis remplacer avec un nouveau N.. (Chaque extrémité si nécessaire).

7 Allgemeine Anleitungen Ersatz von Verschleißteilen:. Wasser absperren und Wasserleitungen entleeren. Nr. in einer Hand halten, mit Nr. in der Hand, Nr. am Unterteil von Nr. mit Schraubenschlüssel. Nr. entfernen und durch Nr. ersetzen.. Nr. losschrauben und von Nr. entfernen. Altes Nr. herausnehmen und durch neues Nr. ersetzen. Nr. auf Nr. unter und neues Nr. aufsetzen. Nr. lose auf Nr. aufsetzen. 0,. Nr. in der Hand halten, Nr. losdrehen und entfernen.. Nr. festhalten und mit Nr. in einer Hand Nr. durch Nr. durchschieben und festziehen, bis Nr. fest angeschraubt ist. Schaft 0 Halter der Auflagefläche. Um Nr. zu ersetzen, Nr. von Nr. losschrauben und entfernen, dann durch neues Nr. ersetzen (beide Enden, falls erforderlich).. Schaft von der Auflagefläche losdrehen, altes Nr. 0 entfernen und durch neues Nr. 0 ersetzen. Diese drei Teile wieder zusammensetzen.

8 RELATED T&S BRASS PRODUCT LINE B-00 PRE-RINSE BRUSH SPRAY UNIT B-00-C POT & KETTLE FILLER T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products Saddleback Cove, P.O. Box 0, T & S Brass-Europe Travelers Rest, SC 0 De Veenhoeve Phone: () -0 Oude Nieuwveenseweg Fax: () - CW Nieuwveen tsbrass@tsbrass.com The Netherlands

Documentos relacionados

Installation and Maintenance Instructions

Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship